[U-Boot-Users] [PATCH 02/25] include/configs: Use new CONFIG_CMD_* in 82xx board config files.

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

From: Jon Loeliger <jdl@jdl.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 02/25] include/configs: Use new CONFIG_CMD_* in 82xx board config files.
Date: Wed, 04 Jul 2007 22:30:28 -0500	[thread overview]
Message-ID: <E1I6I32-0008KM-N9@jdl.com> (raw)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
 include/configs/MPC8260ADS.h |   90 +++++++++++++++++++++--------------------
 include/configs/MPC8266ADS.h |   70 +++++++++++++++++----------------
 2 files changed, 82 insertions(+), 78 deletions(-)

diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 6195bca..aaecd38 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -198,59 +198,61 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_EXCLUDE		CFG_CMD_BEDBUG	| \
-				CFG_CMD_BMP	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DISPLAY | \
-				CFG_CMD_DOC	| \
-				CFG_CMD_DTT	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EXT2	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_FDC	| \
-				CFG_CMD_FDOS	| \
-				CFG_CMD_HWFLOW	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_MMC	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_PCMCIA	| \
-				CFG_CMD_REISER	| \
-				CFG_CMD_SCSI	| \
-				CFG_CMD_SPI	| \
-				CFG_CMD_SNTP	| \
-				CFG_CMD_UNIVERSE | \
-				CFG_CMD_USB	| \
-				CFG_CMD_VFD	| \
-				CFG_CMD_XIMG
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
 
 #if CONFIG_ADSTYPE == CFG_8272ADS
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-			         CFG_CMD_SDRAM	| \
-				 CFG_CMD_I2C	| \
-				 CFG_EXCLUDE	) )
+    #undef CONFIG_CMD_SDRAM
+    #undef CONFIG_CMD_I2C
+
 #elif CONFIG_ADSTYPE >= CFG_PQ2FADS
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_SDRAM	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_PCI	| \
-				 CFG_EXCLUDE	) )
+    #undef CONFIG_CMD_SDRAM
+    #undef CONFIG_CMD_I2C
+    #undef CONFIG_CMD_PCI
+
 #else
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CMD_CFG_PCI 	| \
-				 CFG_EXCLUDE 	) )
+    #undef CONFIG_CMD_PCI
+
 #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+
 
 #define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm fff80000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock2"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -268,7 +270,7 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG & CFG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
@@ -384,7 +386,7 @@
 #endif /* CFG_RAMBOOT */
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 4953b70..d6dd73b 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -146,35 +146,39 @@
 #define CONFIG_BAUDRATE		115200
 
 
-#define CONFIG_COMMANDS	      ( CFG_CMD_ALL & ~( \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_BMP	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DISPLAY | \
-				CFG_CMD_DOC	| \
-				CFG_CMD_DTT	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EXT2	| \
-				CFG_CMD_FDC	| \
-				CFG_CMD_FDOS	| \
-				CFG_CMD_HWFLOW	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_MMC	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_PCMCIA	| \
-				CFG_CMD_REISER	| \
-				CFG_CMD_SCSI	| \
-				CFG_CMD_SPI	| \
-				CFG_CMD_SNTP	| \
-				CFG_CMD_VFD	| \
-				CFG_CMD_UNIVERSE | \
-				CFG_CMD_USB	| \
-				CFG_CMD_XIMG	) )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
 
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
@@ -210,13 +214,11 @@
 				 CONFIG_BOOTP_BOOTFILESIZE | \
 				 CONFIG_BOOTP_DNS)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -231,7 +233,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
@@ -452,7 +454,7 @@
 
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-- 
1.5.2.2.249.g45fd

next             reply	other threads:[~2007-07-05  3:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-05  3:30 Jon Loeliger [this message]
2007-07-05 12:54 ` [U-Boot-Users] [PATCH 02/25] include/configs: Use new CONFIG_CMD_* in 82xx board config files Jerry Van Baren
2007-07-05 13:54   ` Jon Loeliger
2007-07-05 14:01     ` Jerry Van Baren

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:6195bca dfblob:aaecd38 dfblob:4953b70 dfblob:d6dd73b )
 OR (
bs:"[U-Boot-Users] [PATCH 02/25] include/configs: Use new CONFIG_CMD_* in 82xx board config files." )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1I6I32-0008KM-N9@jdl.com \
    --to=jdl@jdl.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox