[U-Boot-Users] [PATCH 06/18] include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.

Jon Loeliger
2007-07-08T22:21:55Z

Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
include/configs/FADS823.h | 11 ++++++---
include/configs/FADS850SAR.h | 12 +++++++---
include/configs/FLAGADM.h | 24 ++++++++++++++------
include/configs/FPS850L.h | 23 +++++++++++--------
include/configs/FPS860L.h | 22 ++++++++++--------
include/configs/G2000.h | 35 ++++++++++++++++--------------
include/configs/GEN860T.h | 48 ++++++++++++++++++-----------------------
include/configs/GENIETV.h | 12 +++++++---
include/configs/GTH.h | 17 +++++++++-----
9 files changed, 116 insertions(+), 88 deletions(-)

diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index 1b562d6..7857cf1 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -107,15 +107,18 @@

#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+

/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT ":>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -190,7 +193,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index 2a986f0..c2238c9 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -61,15 +61,19 @@

#undef CONFIG_WATCHDOG /* watchdog disabled */

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+

/*
* Miscellaneous configurable options
*/
#undef CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT ":>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -148,7 +152,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h
index 8babee1..af31f70 100644
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -64,19 +64,29 @@

#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)

-#define CONFIG_COMMANDS (CFG_CMD_BDI | CFG_CMD_IMI | CFG_CMD_CACHE | \
- CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_LOADS | \
- CFG_CMD_ENV | CFG_CMD_REGINFO | CFG_CMD_IMMAP | CFG_CMD_NET)
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_NET

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>

/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "EEG> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -152,7 +162,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index 0dd21bc..1295693 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -62,22 +62,25 @@

#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL

-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~( \
- CFG_CMD_CONSOLE | \
- CFG_CMD_BDI | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB | \
- CFG_CMD_CACHE ) )

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_CACHE
+

/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -160,7 +163,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index 423d74e..d97151f 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -62,22 +62,24 @@

#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */

-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+

/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -160,7 +162,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index db42fd0..24eff02 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -88,20 +88,23 @@
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
#endif

-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_BSP | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+

#undef CONFIG_WATCHDOG /* watchdog disabled */

@@ -120,7 +123,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -324,7 +327,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 6613f90..612b661 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -228,31 +228,30 @@
#define CFG_CMD_POST_DIAG 0
#endif

+
/*
- * List of available monitor commands. Use the system default list
- * plus add some of the "non-standard" commands back in.
- * See ./cmd_confdefs.h
- */
-#define BASE_CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_FPGA | \
- CFG_CMD_MII | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_POST_DIAG )
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_POST_DIAG

#if !defined(CONFIG_SC)
-#define CONFIG_COMMANDS ( BASE_CONFIG_COMMANDS | CFG_CMD_DOC )
-#else
-#define CONFIG_COMMANDS BASE_CONFIG_COMMANDS
+ #define CONFIG_CMD_DOC
#endif

+
/*
* There is no IDE/PCMCIA hardware support on the board.
*/
@@ -279,11 +278,6 @@
#define CFG_FPGA_PROG_FEEDBACK

-/************************************************************************
- * This must be included AFTER the definition of any CONFIG_COMMANDS
- */
-#include <cmd_confdefs.h>
-
#define CFG_NAND_LEGACY

/*
@@ -306,7 +300,7 @@
/*
* Set buffer size for console I/O
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024
#else
#define CFG_CBSIZE 256
@@ -471,7 +465,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of above value */
#endif

diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h
index 8c01d97..67525db 100644
--- a/include/configs/GENIETV.h
+++ b/include/configs/GENIETV.h
@@ -105,15 +105,19 @@

#undef CONFIG_WATCHDOG /* watchdog disabled */

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+

/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT ":>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -193,7 +197,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

diff --git a/include/configs/GTH.h b/include/configs/GTH.h
index 03b9659..f398bad 100644
--- a/include/configs/GTH.h
+++ b/include/configs/GTH.h
@@ -97,18 +97,23 @@
#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
#endif

-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_PROMPT "=>" /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -190,7 +195,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif

--
1.5.2.2.249.g45fd