From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL] Zynq patches
Date: Sat, 24 May 2014 10:38:37 +0200 [thread overview]
Message-ID: <E1Wo7TT-0000vk-6u@janus> (raw)
In-Reply-To: <6ccf6382-38eb-402b-9919-fbee05f4518b@BY2FFO11FD012.protection.gbl>
Hi Michal,
On Wed, 14 May 2014 08:09:36 +0200, Michal Simek
<michal.simek@xilinx.com> wrote:
> Hi Albert,
>
> here is the set of patches I have capture for Xilinx Zynq.
> I am sending it now because this patchset was based on
> fpga changes I have done and which were merged yesterday.
>
> I have also checked your arm custodian repo and you don't have
> pending patches that's why I believe it shouldn't be
> any problem to do a merge with Tom's tree.
>
> Buildman doesn't show any problem around zynq patches I am sending.
>
> Thanks,
> Michal
>
>
> [u-boot]$ ./tools/buildman/buildman -b zynq zynq -sSed
> Summary of 21 commits for 6 boards (4 threads, 1 job per thread)
> 01: Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
> 02: ARM: zynq: Fix sparse warnings in slcr.c
> 03: ARM: zynq: Fix sparse warning in ddrc.c
> 04: ARM: zynq: Remove sparse warnings
> arm: (for 6/6 boards) data -168.0 rodata +168.0
> zynq_zc770_xm010: data -168 rodata +168
> zynq_zc770_xm013: data -168 rodata +168
> zynq_zc770_xm012: data -168 rodata +168
> zynq_zed : data -168 rodata +168
> zynq_zc70x : data -168 rodata +168
> zynq_microzed : data -168 rodata +168
> 05: ARM: zynq: Added efuse status register base address
> 06: ARM: zynq: Do not use half memory size for ECC case
> arm: (for 6/6 boards) all -32.0 text -32.0
> zynq_zc770_xm010: all -32 text -32
> zynq_zc770_xm013: all -32 text -32
> zynq_zc770_xm012: all -32 text -32
> zynq_zed : all -32 text -32
> zynq_zc70x : all -32 text -32
> zynq_microzed : all -32 text -32
> 07: ARM: zynq: Call zynq board_init() in SPL
> arm: (for 6/6 boards) spl/u-boot-spl:all +16.0 spl/u-boot-spl:text +16.0
> zynq_zc770_xm010: spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
> zynq_zc770_xm013: spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
> zynq_zc770_xm012: spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
> zynq_zed : spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
> zynq_zc70x : spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
> zynq_microzed : spl/u-boot-spl:all +16 spl/u-boot-spl:text +16
> 08: ARM: zynq: slcr: Fix incorrect commentary
> 09: ARM: zynq: Setup correct slcr_lock value
> arm: (for 6/6 boards) all +102.0 bss +2.7 data +4.0 spl/u-boot-spl:all +72.0 spl/u-boot-spl:data +4.0 spl/u-boot-spl:text +68.0 text +95.3
> zynq_zc770_xm010: all +112 bss +12 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
> zynq_zed : all +112 bss +12 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
> zynq_microzed : all +112 bss +12 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
> zynq_zc770_xm013: all +100 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
> zynq_zc770_xm012: all +96 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +92
> zynq_zc70x : all +80 bss -20 data +4 spl/u-boot-spl:all +72 spl/u-boot-spl:data +4 spl/u-boot-spl:text +68 text +96
> 10: ARM: zynq: Fix bootmode mask
> 11: ARM: zynq: Fix building SPL without FPGA support
> 12: ARM: zynq: Extend kernel image size to 60MB
> 13: ARM: zynq: Add MIO detection code
> 14: ARM: zynq: ehci: Added USB host driver support
> arm: (for 6/6 boards) all +9.3 bss -0.7 rodata +10.0 spl/u-boot-spl:all +10.0 spl/u-boot-spl:rodata +10.0
> zynq_zc70x : all +34 bss +24 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
> zynq_zc770_xm013: all +10 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
> zynq_zc770_xm012: all +10 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
> zynq_zc770_xm010: all +2 bss -8 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
> zynq_microzed : all +2 bss -8 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
> zynq_zed : all -2 bss -12 rodata +10 spl/u-boot-spl:all +10 spl/u-boot-spl:rodata +10
> 15: ARM: zynq: Added USB host support for zynq boards
> arm: (for 6/6 boards) all +36453.7 bss +26203.3 data +38.7 rodata +2047.7 spl/u-boot-spl:all +1.3 spl/u-boot-spl:rodata +1.3 text +8164.0
> zynq_zed : all +109121 bss +78632 data +116 rodata +5881 spl/u-boot-spl:all +4 spl/u-boot-spl:rodata +4 text +24492
> zynq_zc70x : all +109085 bss +78596 data +116 rodata +5881 spl/u-boot-spl:all +4 spl/u-boot-spl:rodata +4 text +24492
> zynq_zc770_xm013: all +131 rodata +131
> zynq_zc770_xm012: all +131 rodata +131
> zynq_zc770_xm010: all +127 bss -4 rodata +131
> zynq_microzed : all +127 bss -4 rodata +131
> 16: ARM: zynq: Enable the FAT write capability
> arm: (for 6/6 boards) all +4133.3 bss -2.0 data +18.7 rodata +386.0 text +3730.7
> zynq_microzed : all +6223 bss +20 data +28 rodata +579 text +5596
> zynq_zc70x : all +6195 bss -8 data +28 rodata +579 text +5596
> zynq_zc770_xm010: all +6191 bss -12 data +28 rodata +579 text +5596
> zynq_zed : all +6191 bss -12 data +28 rodata +579 text +5596
> 17: ARM: zynq: Move USB/SD/MMC common FAT configs
> 18: ARM: zynq: Enable EXT4 configs
> arm: (for 6/6 boards) all +14302.0 bss +562.0 data +74.7 rodata +1142.7 text +12522.7
> zynq_zc770_xm010: all +21462 bss +852 data +112 rodata +1714 text +18784
> zynq_zed : all +21462 bss +852 data +112 rodata +1714 text +18784
> zynq_zc70x : all +21458 bss +848 data +112 rodata +1714 text +18784
> zynq_microzed : all +21430 bss +820 data +112 rodata +1714 text +18784
> 19: ARM: zynq: Extend maximum number of command arguments
> 20: zynq: add empty xil_io.h to avoid compile error
> 21: zynq: treat ps7_init.c/h as external files to ignore them
> arm: (for 6/6 boards) spl/u-boot-spl:all -83.0 spl/u-boot-spl:rodata -75.0 spl/u-boot-spl:text -8.0
> zynq_zc770_xm010: spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
> zynq_zc770_xm013: spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
> zynq_zc770_xm012: spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
> zynq_zed : spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
> zynq_zc70x : spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
> zynq_microzed : spl/u-boot-spl:all -83 spl/u-boot-spl:rodata -75 spl/u-boot-spl:text -8
>
>
> The following changes since commit 27b4e4b9913f65b52d20485dff3f8800bf78f3d7:
>
> Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze (2014-05-13 07:34:08 -0400)
>
> are available in the git repository at:
>
>
> git://www.denx.de/git/u-boot-microblaze.git zynq
>
> for you to fetch changes up to 66e6715c5ffe817c70485020508c7b9ec47227b7:
>
> zynq: treat ps7_init.c/h as external files to ignore them (2014-05-14 07:52:46 +0200)
>
> ----------------------------------------------------------------
> Masahiro Yamada (2):
> zynq: add empty xil_io.h to avoid compile error
> zynq: treat ps7_init.c/h as external files to ignore them
>
> Michal Simek (12):
> ARM: zynq: Fix sparse warnings in slcr.c
> ARM: zynq: Fix sparse warning in ddrc.c
> ARM: zynq: Remove sparse warnings
> ARM: zynq: Do not use half memory size for ECC case
> ARM: zynq: Call zynq board_init() in SPL
> ARM: zynq: slcr: Fix incorrect commentary
> ARM: zynq: Setup correct slcr_lock value
> ARM: zynq: Fix building SPL without FPGA support
> ARM: zynq: Extend kernel image size to 60MB
> ARM: zynq: Add MIO detection code
> ARM: zynq: ehci: Added USB host driver support
> ARM: zynq: Extend maximum number of command arguments
>
> Mike Looijmans (1):
> ARM: zynq: Fix bootmode mask
>
> Siva Durga Prasad Paladugu (5):
> ARM: zynq: Added efuse status register base address
> ARM: zynq: Added USB host support for zynq boards
> ARM: zynq: Enable the FAT write capability
> ARM: zynq: Move USB/SD/MMC common FAT configs
> ARM: zynq: Enable EXT4 configs
>
> arch/arm/cpu/armv7/zynq/cpu.c | 13 ++++++++++++
> arch/arm/cpu/armv7/zynq/ddrc.c | 5 +----
> arch/arm/cpu/armv7/zynq/slcr.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
> arch/arm/cpu/armv7/zynq/spl.c | 15 ++++++++++++++
> arch/arm/include/asm/arch-zynq/hardware.h | 13 +++++++++++-
> arch/arm/include/asm/arch-zynq/sys_proto.h | 2 ++
> board/xilinx/zynq/.gitignore | 1 +
> board/xilinx/zynq/Makefile | 5 ++++-
> board/xilinx/zynq/board.c | 25 ++++++++++++++---------
> board/xilinx/zynq/ps7_init.c | 12 -----------
> board/xilinx/zynq/xil_io.h | 13 ++++++++++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-zynq.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/configs/zynq-common.h | 32 +++++++++++++++++++++++++----
> include/configs/zynq_zc70x.h | 1 +
> include/configs/zynq_zed.h | 1 +
> 16 files changed, 294 insertions(+), 36 deletions(-)
> create mode 100644 board/xilinx/zynq/.gitignore
> delete mode 100644 board/xilinx/zynq/ps7_init.c
> create mode 100644 board/xilinx/zynq/xil_io.h
> create mode 100644 drivers/usb/host/ehci-zynq.c
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2014-05-24 8:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-14 6:09 [U-Boot] [GIT PULL] Zynq patches Michal Simek
2014-05-20 13:21 ` [U-Boot] [GIT PULL] Zynq patches v2 Michal Simek
2014-05-20 19:38 ` Albert ARIBAUD
2014-05-24 8:38 ` Albert ARIBAUD
2014-05-24 8:38 ` Albert ARIBAUD [this message]
2014-05-24 8:40 ` [U-Boot] [GIT PULL] Zynq patches Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2014-11-11 10:22 Michal Simek
2014-11-11 20:47 ` Tom Rini
2014-11-13 12:24 ` Michal Simek
2014-11-13 15:33 ` Tom Rini
[not found] <53F30357.4030307@xilinx.com>
2014-08-29 10:39 ` Michal Simek
2014-08-19 7:57 Michal Simek
2014-07-23 13:53 Michal Simek
2014-07-28 8:10 ` Albert ARIBAUD
2014-02-10 9:25 Michal Simek
2014-02-10 9:44 ` Albert ARIBAUD
2014-02-10 9:50 ` Michal Simek
2014-02-13 15:12 ` Albert ARIBAUD
2014-02-13 15:30 ` Michal Simek
2014-02-13 16:33 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1Wo7TT-0000vk-6u@janus \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox