From mboxrd@z Thu Jan 1 00:00:00 1970 From: David A. Peters Date: Wed, 15 Sep 2004 09:06:43 -0500 Subject: [U-Boot-Users] soft or hard I2C code for AT91RM9200? In-Reply-To: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I have the soft I2C working except for one small problem. When I try to read more than 2 bytes from the eeprom, I get the first two bytes, and anything else that follows is 0xFF. I've verified that data is written to the eeprom in other locations. I am using a 24AA256. Has anyone else seen this problem? -----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of David A. Peters Sent: Tuesday, September 14, 2004 3:10 PM To: U-Boot Users List Subject: [U-Boot-Users] soft or hard I2C code for AT91RM9200? Does anyone have I2C code for the AT92RM9200 that they would be willing to share? I am trying to get the soft I2C working, but I am struggling. Thank you! ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users