[U-Boot-Users] Hi, I am new to U-Boot, I am having problems on porting U-Boot

[U-Boot-Users] Hi, I am new to U-Boot, I am having problems on porting U-Boot

[Jian-Bang Lai]

Dear All:

I am new to U-Boot. I am fighting with U-Boot and new board. There are 
MPC8245, 128MB DRAM, 512k X 8 flash PROM, and a 32MB DOC on my board. I am 
trying to modify a configuration of existed board, BMW,  to make U-Boot and 
UART work firstly. Such that I can communicate with my board via Hyper-term 
or minicom. 

However, I modified the include/configs/BMW.h many times, burn the binary 
file into flash rom, I still can not get any messages via Hyper-term. Can 
any percursor kindly give me some suggestions?

Ps. I have checked the address of 512k flash PROM (0xfff0-0000 ~ 
0xfff7-ffff), baud rate set to 9600 (by BMW defaults).

_________________________________________________________________
???? MSN Mobile ??????????? MSN Hotmail 
http://msn.com.tw/msnmobile 

[U-Boot-Users] Hi, I am new to U-Boot, I am having problems on porting U-Boot

[Jian-Bang Lai]

Hi,

The new board is made by ourselves, but I don't know if it similar to 
"Merlin".

Regards,

Ban


>From: "Matias Sundman (AL/EAB)" <matias.sundman@ericsson.com>
>To: "'Jian-Bang Lai'" <jian_bang@hotmail.com>,        
u-boot-users at lists.sourceforge.net
>Subject: RE: [U-Boot-Users] Hi, I am new to U-Boot, I am having problems 
on porting U-Boot
>Date: Wed, 18 Feb 2004 07:58:22 +0100
>
>Hi,
>Which board are you fighting with, is it the successor to "BMW" called 
"Merlin" from Broadcom?
>
>Cheers // Matias
>
>-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net 
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Jian-Bang Lai
>Sent: den 18 februari 2004 03:53
>To: u-boot-users at lists.sourceforge.net
>Subject: [U-Boot-Users] Hi, I am new to U-Boot, I am having problems on 
porting U-Boot
>
>
>Dear All:
>
>I am new to U-Boot. I am fighting with U-Boot and new board. There are
>MPC8245, 128MB DRAM, 512k X 8 flash PROM, and a 32MB DOC on my board. I am
>trying to modify a configuration of existed board, BMW,  to make U-Boot 
and
>UART work firstly. Such that I can communicate with my board via 
Hyper-term
>or minicom.
>
>However, I modified the include/configs/BMW.h many times, burn the binary
>file into flash rom, I still can not get any messages via Hyper-term. Can
>any percursor kindly give me some suggestions?
>
>Ps. I have checked the address of 512k flash PROM (0xfff0-0000 ~
>0xfff7-ffff), baud rate set to 9600 (by BMW defaults).
>
>_________________________________________________________________
>???? MSN Mobile ??????????? MSN Hotmail
>http://msn.com.tw/msnmobile
>
>
>
>-------------------------------------------------------
>SF.Net is sponsored by: Speed Start Your Linux Apps Now.
>Build and deploy apps & Web services for Linux with
>a free DVD software kit from IBM. Click Now!
>http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
>_______________________________________________
>U-Boot-Users mailing list
>U-Boot-Users at lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>This communication is confidential and intended solely for the 
addressee(s). Any unauthorized review, use, disclosure or distribution is 
prohibited. If you believe this message has been sent to you in error, 
please notify the sender by replying to this transmission and delete the 
message without disclosing it. Thank you.
>
>E-mail including attachments is susceptible to data corruption, 
interruption, unauthorized amendment, tampering and viruses, and we only 
send and receive e-mails on the basis that we are not liable for any such 
corruption, interception, amendment, tampering or viruses or any 
consequences thereof.
>

_________________________________________________________________
???? MSN Mobile ??????????? MSN Hotmail 
http://msn.com.tw/msnmobile