From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Schramel Date: Tue, 5 Aug 2003 14:28:29 +0200 Subject: [U-Boot-Users] SED13806 and MPC866 Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, First i have to say "i am new in embedded Linux". I am very interested in the new 866 of Motorola. For a graphical output the EPSON SED13806 is planned. I've found in the archive that this chip is supported from U-Boot ;-) !! My question is, how to setup and to tell the kernel that the EPSON is its graphical output. The start address in SED13806 is defined by my board with its CSx base address, i think. Is there more to tell as its start address ? How i setup my kernel that a SED13806 exists or has my device driver to do this ?? If you know more useful things about the SED-chip, please let me know. Thanks a lot Marco Marco Schramel Tel. +49(0)9929/ 301-332 R&D Fax +49(0)9929/ 301-112 BARTEC Schulstra?e 30, 94239 Gotteszell,GERMANY Marco.Schramel at go.bartec.de -------------- next part -------------- A non-text attachment was scrubbed... Name: winmail.dat Type: application/ms-tnef Size: 2072 bytes Desc: not available Url : http://lists.denx.de/pipermail/u-boot/attachments/20030805/cd2f26f2/attachment.bin