From mboxrd@z Thu Jan 1 00:00:00 1970 From: seaman Date: Wed, 9 Apr 2003 15:53:46 +0900 Subject: [U-Boot-Users] unzip kernel error in lubbock platform References: <001f01c2fee3$e88f1e40$fe02a8c0@esd11> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de ----- Original Message ----- From: "Zhao Hongda" To: Sent: Thursday, April 10, 2003 7:03 AM Subject: [U-Boot-Users] unzip kernel error in lubbock platform > I follow these steps: > $ make zImage > $ arm-linux-objcopy -S -O binary vmlinux linux > $ gzip -vf9 linux > $ mkimage -n name -A arm -O linux -T kernel -C gzip -a a0008000 -e a0008000 > \ > -d linux.gz linuxgz.image > > then load it follow these steps: > =>loadb 0xa1000000 > =>bootm 0xa1000000 > ## Booting image at a1000000 ... > Image Name: akzhd crazy > Image Type: ARM Linux Kernel Image (gzip compressed) > Data Size: 791658 Bytes = 773.1 kB > Load Address: a0008000 > Entry Point: a0008000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... Error: inflateInit2() returned -4 > GUNZIP ERROR - must RESET board to recover > > Could someone tell me the detail step to create a usable uImage file, > and how to load / run it? > Thanks. > Hongda Zhao > > I think the problem may be the interface between the U-BOOT and the LINUX,maybe not the step of creating image. > > > ------------------------------------------------------- > This SF.net email is sponsored by: ValueWeb: > Dedicated Hosting for just $79/mo with 500 GB of bandwidth! > No other company gives more support or power for your dedicated server > http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/ > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users >