U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
To: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: xypron.glpk@gmx.de, agraf@csgraf.de, sjg@chromium.org,
	u-boot@lists.denx.de
Subject: Re: [resent RFC 14/22] efi_loader: disk: a helper function to create efi_disk objects from udevice
Date: Mon, 4 Oct 2021 21:50:02 +0300	[thread overview]
Message-ID: <YVtM2p4SKmXkx5dz@enceladus> (raw)
In-Reply-To: <20211004034430.41355-15-takahiro.akashi@linaro.org>

On Mon, Oct 04, 2021 at 12:44:22PM +0900, AKASHI Takahiro wrote:
> Add efi_disk_create() function.
> 
> Any UEFI handle created by efi_disk_create() can be treated as a efi_disk
> object, the udevice is either a UCLASS_BLK (a whole raw disk) or
> UCLASS_PARTITION (a disk partition).
> 
> So this function is expected to be called every time such an udevice
> is detected and activated through a device model's "probe" interface.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
>  include/efi_loader.h      |  2 +
>  lib/efi_loader/efi_disk.c | 92 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 94 insertions(+)
> 
> diff --git a/include/efi_loader.h b/include/efi_loader.h
> index c440962fe522..751fde7fb153 100644
> --- a/include/efi_loader.h
> +++ b/include/efi_loader.h
> @@ -517,6 +517,8 @@ efi_status_t EFIAPI efi_convert_pointer(efi_uintn_t debug_disposition,
>  void efi_carve_out_dt_rsv(void *fdt);
>  /* Called by bootefi to make console interface available */
>  efi_status_t efi_console_register(void);
> +/* Called when a block devices has been probed */
> +int efi_disk_create(struct udevice *dev);
>  /* Called by bootefi to make all disk storage accessible as EFI objects */
>  efi_status_t efi_disk_register(void);
>  /* Called by efi_init_obj_list() to install EFI_RNG_PROTOCOL */
> diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
> index cd5528046251..3fae40e034fb 100644
> --- a/lib/efi_loader/efi_disk.c
> +++ b/lib/efi_loader/efi_disk.c
> @@ -10,6 +10,7 @@
>  #include <common.h>
>  #include <blk.h>
>  #include <dm.h>
> +#include <dm/device-internal.h>
>  #include <efi_loader.h>
>  #include <fs.h>
>  #include <log.h>
> @@ -484,6 +485,7 @@ error:
>  	return ret;
>  }
>  
> +#ifndef CONFIG_BLK
>  /**
>   * efi_disk_create_partitions() - create handles and protocols for partitions
>   *
> @@ -531,6 +533,96 @@ int efi_disk_create_partitions(efi_handle_t parent, struct blk_desc *desc,
>  
>  	return disks;
>  }
> +#endif /* CONFIG_BLK */
> +
> +/*
> + * Create a handle for a whole raw disk
> + *
> + * @dev		uclass device
> + * @return	0 on success, -1 otherwise
> + */
> +static int efi_disk_create_raw(struct udevice *dev)
> +{
> +	struct efi_disk_obj *disk;
> +	struct blk_desc *desc;
> +	const char *if_typename;
> +	int diskid;
> +	efi_status_t ret;
> +
> +	desc = dev_get_uclass_plat(dev);
> +	if_typename = blk_get_if_type_name(desc->if_type);
> +	diskid = desc->devnum;
> +
> +	ret = efi_disk_add_dev(NULL, NULL, if_typename, desc,
> +			       diskid, NULL, 0, &disk);
> +	if (ret != EFI_SUCCESS) {
> +		log_err("Adding disk %s%d failed\n", if_typename, diskid);
> +		return -1;
> +	}
> +	disk->dev = dev;
> +	dev->efi_obj = &disk->header;
> +
> +	return 0;
> +}
> +
> +/*
> + * Create a handle for a disk partition
> + *
> + * @dev		uclass device
> + * @return	0 on success, -1 otherwise
> + */
> +static int efi_disk_create_part(struct udevice *dev)
> +{
> +	efi_handle_t parent;
> +	struct blk_desc *desc;
> +	const char *if_typename;
> +	struct disk_part *part_data;
> +	struct disk_partition *info;
> +	unsigned int part;
> +	int diskid;
> +	struct efi_device_path *dp = NULL;
> +	struct efi_disk_obj *disk;
> +	efi_status_t ret;
> +
> +	parent = dev->parent->efi_obj;
> +	desc = dev_get_uclass_plat(dev->parent);
> +	if_typename = blk_get_if_type_name(desc->if_type);
> +	diskid = desc->devnum;
> +
> +	part_data = dev_get_uclass_plat(dev);
> +	part = part_data->partnum;
> +	info = &part_data->gpt_part_info;
> +
> +	/* TODO: should not use desc? */
> +	dp = efi_dp_from_part(desc, 0);
> +
> +	ret = efi_disk_add_dev(parent, dp, if_typename, desc, diskid,
> +			       info, part, &disk);
> +	if (ret != EFI_SUCCESS) {
> +		log_err("Adding partition %s%d:%x failed\n",
> +			if_typename, diskid, part);
> +		return -1;
> +	}
> +	disk->dev = dev;
> +	dev->efi_obj = &disk->header;
> +
> +	return 0;
> +}

Can't we add a 'bool part' on this one and have a single function?

> +
> +int efi_disk_create(struct udevice *dev)
> +{
> +	enum uclass_id id;
> +
> +	id = device_get_uclass_id(dev);
> +
> +	if (id == UCLASS_BLK)
> +		return efi_disk_create_raw(dev);
> +
> +	if (id == UCLASS_PARTITION)
> +		return efi_disk_create_part(dev);
> +
> +	return -1;
> +}
>  
>  /**
>   * efi_disk_register() - register block devices
> -- 
> 2.33.0
> 

Regards
/Ilias

  reply	other threads:[~2021-10-04 18:50 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-04  3:44 [resent RFC 00/22] efi_loader: more tightly integrate UEFI disks to device model AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 01/22] part: call part_init() in blk_get_device_by_str() only for MMC AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 02/22] scsi: call device_probe() after scanning AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 03/22] usb: storage: " AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 04/22] mmc: " AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 05/22] nvme: " AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 06/22] sata: " AKASHI Takahiro
2021-10-04 18:45   ` Ilias Apalodimas
2021-10-05  1:06     ` AKASHI Takahiro
2021-10-08  5:44       ` Ilias Apalodimas
2021-10-04  3:44 ` [resent RFC 07/22] block: ide: " AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 08/22] dm: blk: add UCLASS_PARTITION AKASHI Takahiro
2021-10-04 18:40   ` Ilias Apalodimas
2021-10-05  1:30     ` AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 09/22] dm: blk: add a device-probe hook for scanning disk partitions AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 10/22] dm: blk: add read/write interfaces with udevice AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 11/22] efi_loader: disk: use udevice instead of blk_desc AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 12/22] dm: add a hidden link to efi object AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 13/22] efi_loader: remove !CONFIG_BLK code from efi_disk AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 14/22] efi_loader: disk: a helper function to create efi_disk objects from udevice AKASHI Takahiro
2021-10-04 18:50   ` Ilias Apalodimas [this message]
2021-10-05  1:37     ` AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 15/22] dm: blk: call efi's device-probe hook AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 16/22] efi_loader: cleanup after efi_disk-dm integration AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 17/22] efi_loader: add efi_remove_handle() AKASHI Takahiro
2021-10-12  8:16   ` Ilias Apalodimas
2021-10-13  0:55     ` AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 18/22] efi_loader: efi_disk: a helper function to delete efi_disk objects AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 19/22] dm: blk: call efi's device-removal hook AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 20/22] efi_driver: align with efi_disk-dm integration AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 21/22] efi_driver: cleanup after " AKASHI Takahiro
2021-10-04  3:44 ` [resent RFC 22/22] efi_selftest: block device: adjust dp for a test disk AKASHI Takahiro
2021-10-04 14:47 ` [resent RFC 00/22] efi_loader: more tightly integrate UEFI disks to device model Heinrich Schuchardt
2021-10-04 18:07   ` Ilias Apalodimas
2021-10-05  2:27     ` AKASHI Takahiro
2021-10-05  2:14   ` AKASHI Takahiro
2021-10-04 23:45 ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YVtM2p4SKmXkx5dz@enceladus \
    --to=ilias.apalodimas@linaro.org \
    --cc=agraf@csgraf.de \
    --cc=sjg@chromium.org \
    --cc=takahiro.akashi@linaro.org \
    --cc=u-boot@lists.denx.de \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox