From: Alexander Dahl <ada@thorsis.com>
To: Simon Glass <sjg@chromium.org>
Cc: "U-Boot Mailing List" <u-boot@lists.denx.de>,
"Marek Behún" <marek.behun@nic.cz>,
"Rasmus Villemoes" <rasmus.villemoes@prevas.dk>,
"Heinrich Schuchardt" <xypron.glpk@gmx.de>,
"Tom Rini" <trini@konsulko.com>, "Wolfgang Denk" <wd@denx.de>
Subject: Re: [PATCH v9 4/7] sandbox: Use a text-based environment
Date: Wed, 20 Oct 2021 08:58:06 +0200 [thread overview]
Message-ID: <YW+9/oZXPy9a4vGM@ada.ifak-system.com> (raw)
In-Reply-To: <20211019164418.v9.4.I0690bd21a0701ccc5dd95fb5df88519d216d8af5@changeid>
Hello Simon,
Am Tue, Oct 19, 2021 at 04:44:19PM -0600 schrieb Simon Glass:
> Use a text file for the environment instead of the #define settings.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Marek Behún <marek.behun@nic.cz>
> ---
>
> (no changes since v3)
>
> Changes in v3:
> - Add new patch to use a text-based environment for sandbox
>
> board/sandbox/sandbox.env | 25 +++++++++++++++++++++++++
> include/configs/sandbox.h | 29 -----------------------------
> 2 files changed, 25 insertions(+), 29 deletions(-)
> create mode 100644 board/sandbox/sandbox.env
>
> diff --git a/board/sandbox/sandbox.env b/board/sandbox/sandbox.env
> new file mode 100644
> index 00000000000..0f8d95b8db0
> --- /dev/null
> +++ b/board/sandbox/sandbox.env
> @@ -0,0 +1,25 @@
> +stdin=serial
> +#ifdef CONFIG_SANDBOX_SDL
> +stdin+=,cros-ec-keyb,usbkbd
> +#endif
> +stdout=serial,vidconsole
> +stderr=serial,vidconsole
> +
> +ethaddr=00:00:11:22:33:44
> +eth2addr=00:00:11:22:33:48
> +eth3addr=00:00:11:22:33:45
> +eth4addr=00:00:11:22:33:48
> +eth5addr=00:00:11:22:33:46
> +eth6addr=00:00:11:22:33:47
These MAC addresses use the OUI 00:00:11 which is assigned to NORMEREL
SYSTEMES, a company based in France. I doubt U-Boot is allowed to use
addresses from that block, and would prefer using a locally
administered address here, and set the second bit. Thus
02:00:11:xx:xx:xx would be okay for example.
> +ipaddr=1.2.3.4
Same here, this is a globally reachable IP address, which U-Boot
probably is not allowed to use. According to RFC 5737 there are two
IPv4 address blocks for documentational use:
“The blocks 192.0.2.0/24 (TEST-NET-1), 198.51.100.0/24 (TEST-NET-2),
and 203.0.113.0/24 (TEST-NET-3) are provided for use in
documentation.”
Greets
Alex
> +
> +/*
> + * These are used for distro boot which is not supported. But once bootmethod
> + * is provided these will be used again.
> + */
> +bootm_size=0x10000000
> +kernel_addr_r=0x1000000
> +fdt_addr_r=0xc00000
> +ramdisk_addr_r=0x2000000
> +scriptaddr=0x1000
> +pxefile_addr_r=0x2000
> diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
> index c19232f202f..c703a1330c0 100644
> --- a/include/configs/sandbox.h
> +++ b/include/configs/sandbox.h
> @@ -64,37 +64,8 @@
> #define CONFIG_LCD_BMP_RLE8
>
> #define CONFIG_KEYBOARD
> -
> -#define SANDBOX_SERIAL_SETTINGS "stdin=serial,cros-ec-keyb,usbkbd\0" \
> - "stdout=serial,vidconsole\0" \
> - "stderr=serial,vidconsole\0"
> -#else
> -#define SANDBOX_SERIAL_SETTINGS "stdin=serial\0" \
> - "stdout=serial,vidconsole\0" \
> - "stderr=serial,vidconsole\0"
> #endif
>
> -#define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \
> - "eth2addr=00:00:11:22:33:48\0" \
> - "eth3addr=00:00:11:22:33:45\0" \
> - "eth4addr=00:00:11:22:33:48\0" \
> - "eth5addr=00:00:11:22:33:46\0" \
> - "eth6addr=00:00:11:22:33:47\0" \
> - "ipaddr=1.2.3.4\0"
> -
> -#define MEM_LAYOUT_ENV_SETTINGS \
> - "bootm_size=0x10000000\0" \
> - "kernel_addr_r=0x1000000\0" \
> - "fdt_addr_r=0xc00000\0" \
> - "ramdisk_addr_r=0x2000000\0" \
> - "scriptaddr=0x1000\0" \
> - "pxefile_addr_r=0x2000\0"
> -
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> - SANDBOX_SERIAL_SETTINGS \
> - SANDBOX_ETH_SETTINGS \
> - MEM_LAYOUT_ENV_SETTINGS
> -
> #ifndef CONFIG_SPL_BUILD
> #define CONFIG_SYS_IDE_MAXBUS 1
> #define CONFIG_SYS_ATA_IDE0_OFFSET 0
> --
> 2.33.0.1079.g6e70778dc9-goog
>
next prev parent reply other threads:[~2021-10-20 6:58 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-19 22:44 [PATCH v9 0/7] env: Allow environment in text files Simon Glass
2021-10-19 22:44 ` [PATCH v9 1/7] sandbox: Drop distro_boot Simon Glass
2021-10-19 22:44 ` [PATCH v9 2/7] doc: Move environment documentation to rST Simon Glass
2021-10-20 6:38 ` Heinrich Schuchardt
2021-10-22 3:05 ` Simon Glass
2021-10-19 22:44 ` [PATCH v9 3/7] env: Allow U-Boot scripts to be placed in a .env file Simon Glass
2021-10-21 9:50 ` Wolfgang Denk
2021-10-21 12:23 ` Tom Rini
2021-10-21 13:06 ` Wolfgang Denk
2021-10-21 13:25 ` Marek Behún
2021-10-21 13:28 ` Marek Behún
2021-10-21 15:12 ` Wolfgang Denk
2021-10-21 15:18 ` Tom Rini
2021-10-21 15:59 ` Simon Glass
2021-10-21 16:03 ` Tom Rini
2021-10-21 16:51 ` Simon Glass
2021-10-22 6:40 ` Rasmus Villemoes
2021-10-24 19:54 ` Simon Glass
2021-10-25 7:06 ` Rasmus Villemoes
2021-10-25 15:18 ` Simon Glass
2021-10-25 19:52 ` Rasmus Villemoes
2021-10-26 10:15 ` Wolfgang Denk
2021-10-28 14:18 ` Simon Glass
2021-10-22 8:08 ` Wolfgang Denk
2021-10-22 14:47 ` Tom Rini
2021-10-24 15:46 ` Wolfgang Denk
2021-10-24 16:44 ` Tom Rini
2021-10-25 7:48 ` Wolfgang Denk
2021-10-22 8:06 ` Wolfgang Denk
2021-10-22 14:04 ` Marek Behún
2021-10-22 14:50 ` Tom Rini
2021-10-19 22:44 ` [PATCH v9 4/7] sandbox: Use a text-based environment Simon Glass
2021-10-20 6:58 ` Alexander Dahl [this message]
2021-10-19 22:44 ` [PATCH v9 5/7] doc: Mention CONFIG_DEFAULT_ENV_FILE Simon Glass
2021-10-19 22:44 ` [PATCH v9 6/7] doc: Improve environment documentation Simon Glass
2021-10-19 22:44 ` [PATCH v9 7/7] bootm: Tidy up use of autostart env var Simon Glass
2021-10-21 14:02 ` [PATCH v9 0/7] env: Allow environment in text files Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YW+9/oZXPy9a4vGM@ada.ifak-system.com \
--to=ada@thorsis.com \
--cc=marek.behun@nic.cz \
--cc=rasmus.villemoes@prevas.dk \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox