From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <rick@andestech.com>, <ycliang@andestech.com>, <u-boot@lists.denx.de>
Subject: [PULL] u-boot-riscv/master
Date: Fri, 21 Apr 2023 00:41:14 +0000 [thread overview]
Message-ID: <ZEHbqoEXAB+BAtmo@ubuntu01> (raw)
Hi Tom,
The following changes since commit 5db4972a5bbdbf9e3af48ffc9bc4fec73b7b6a79:
Merge tag 'u-boot-nand-20230417' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash (2023-04-17 10:47:33 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to 04d16be55404ee07134b4171dea37eff9ad8fa5a:
riscv: Support CONFIG_REMAKE_ELF (2023-04-20 20:45:08 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/16065
----------------------------------------------------------------
* Add StarFive VisionFive v2 Board support
* Support CONFIG_REMAKE_ELF
* Code cleanups for RISC-V architecture
----------------------------------------------------------------
Bin Meng (11):
riscv: Correct a comment in io.h
riscv: Enforce DWARF4 output
riscv: Optimize source end address calculation in start.S
riscv: Optimize loading relocation type
tools: prelink-riscv: Cosmetic style fixes
tools: prelink-riscv: Unmap the ELF image when done
makefile: riscv: Drop useless argument of prelink-riscv
riscv: Change to use positive offset to access relocation entries
riscv: Avoid updating the link register
riscv: spl: Remove relocation sections
riscv: Update alignment for some sections in linker scripts
Jianlong Huang (1):
dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
Kuan Lim Lee (1):
pinctrl: starfive: Add StarFive JH7110 driver
Samuel Holland (1):
riscv: Support CONFIG_REMAKE_ELF
Yanhong Wang (15):
riscv: cpu: jh7110: Add support for jh7110 SoC
cache: starfive: Add StarFive JH7110 support
dt-bindings: reset: Add StarFive JH7110 reset definitions
reset: starfive: jh7110: Add reset driver for StarFive JH7110 SoC
dt-bindings: clock: Add StarFive JH7110 clock definitions
clk: starfive: Add StarFive JH7110 clock driver
ram: starfive: add ddr driver
board: starfive: add StarFive VisionFive v2 board support
riscv: cpu: jh7110: Add Kconfig for StarFive JH7110 SoC
board: starfive: Add Kconfig for StarFive VisionFive v2 Board
board: starfive: Add TARGET_STARFIVE_VISIONFIVE2 to Kconfig
riscv: dts: jh7110: Add initial StarFive JH7110 device tree
riscv: dts: jh7110: Add initial u-boot device tree
riscv: dts: jh7110: Add initial StarFive VisionFive v2 board device tree
configs: starfive: add starfive_visionfive2_defconfig
Makefile | 2 +-
arch/riscv/Kconfig | 5 +
arch/riscv/config.mk | 5 +-
arch/riscv/cpu/jh7110/Kconfig | 28 ++
arch/riscv/cpu/jh7110/Makefile | 10 +
arch/riscv/cpu/jh7110/cpu.c | 23 ++
arch/riscv/cpu/jh7110/dram.c | 38 +++
arch/riscv/cpu/jh7110/spl.c | 64 ++++
arch/riscv/cpu/start.S | 28 +-
arch/riscv/cpu/u-boot-spl.lds | 27 +-
arch/riscv/cpu/u-boot.lds | 6 +-
arch/riscv/dts/Makefile | 3 +-
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi | 69 ++++
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts | 12 +
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi | 69 ++++
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b.dts | 12 +
arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 319 +++++++++++++++++++
arch/riscv/dts/jh7110-u-boot.dtsi | 99 ++++++
arch/riscv/dts/jh7110.dtsi | 573 +++++++++++++++++++++++++++++++++
arch/riscv/include/asm/arch-jh7110/regs.h | 19 ++
arch/riscv/include/asm/arch-jh7110/spl.h | 12 +
arch/riscv/include/asm/io.h | 2 +-
board/starfive/visionfive2/Kconfig | 53 ++++
board/starfive/visionfive2/MAINTAINERS | 7 +
board/starfive/visionfive2/Makefile | 7 +
board/starfive/visionfive2/spl.c | 87 +++++
board/starfive/visionfive2/starfive_visionfive2.c | 40 +++
configs/starfive_visionfive2_defconfig | 79 +++++
doc/board/index.rst | 1 +
doc/board/starfive/index.rst | 9 +
doc/board/starfive/visionfive2.rst | 492 +++++++++++++++++++++++++++++
drivers/cache/cache-sifive-ccache.c | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/starfive/Kconfig | 17 +
drivers/clk/starfive/Makefile | 4 +
drivers/clk/starfive/clk-jh7110-pll.c | 321 +++++++++++++++++++
drivers/clk/starfive/clk-jh7110.c | 603 +++++++++++++++++++++++++++++++++++
drivers/clk/starfive/clk.h | 57 ++++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/starfive/Kconfig | 28 ++
drivers/pinctrl/starfive/Makefile | 6 +
drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 113 +++++++
drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 399 +++++++++++++++++++++++
drivers/pinctrl/starfive/pinctrl-starfive.c | 398 +++++++++++++++++++++++
drivers/pinctrl/starfive/pinctrl-starfive.h | 55 ++++
drivers/ram/Kconfig | 1 +
drivers/ram/Makefile | 4 +-
drivers/ram/starfive/Kconfig | 5 +
drivers/ram/starfive/Makefile | 11 +
drivers/ram/starfive/ddrcsr_boot.c | 339 ++++++++++++++++++++
drivers/ram/starfive/ddrphy_start.c | 279 ++++++++++++++++
drivers/ram/starfive/ddrphy_train.c | 383 ++++++++++++++++++++++
drivers/ram/starfive/ddrphy_utils.c | 1955 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/ram/starfive/starfive_ddr.c | 161 ++++++++++
drivers/ram/starfive/starfive_ddr.h | 65 ++++
drivers/reset/Kconfig | 16 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-jh7110.c | 158 ++++++++++
include/configs/starfive-visionfive2.h | 49 +++
include/dt-bindings/clock/starfive,jh7110-crg.h | 257 +++++++++++++++
include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h | 427 +++++++++++++++++++++++++
include/dt-bindings/reset/starfive,jh7110-crg.h | 183 +++++++++++
tools/prelink-riscv.c | 2 +
tools/prelink-riscv.inc | 12 +-
66 files changed, 8456 insertions(+), 58 deletions(-)
create mode 100644 arch/riscv/cpu/jh7110/Kconfig
create mode 100644 arch/riscv/cpu/jh7110/Makefile
create mode 100644 arch/riscv/cpu/jh7110/cpu.c
create mode 100644 arch/riscv/cpu/jh7110/dram.c
create mode 100644 arch/riscv/cpu/jh7110/spl.c
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b.dts
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
create mode 100644 arch/riscv/dts/jh7110-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110.dtsi
create mode 100644 arch/riscv/include/asm/arch-jh7110/regs.h
create mode 100644 arch/riscv/include/asm/arch-jh7110/spl.h
create mode 100644 board/starfive/visionfive2/Kconfig
create mode 100644 board/starfive/visionfive2/MAINTAINERS
create mode 100644 board/starfive/visionfive2/Makefile
create mode 100644 board/starfive/visionfive2/spl.c
create mode 100644 board/starfive/visionfive2/starfive_visionfive2.c
create mode 100644 configs/starfive_visionfive2_defconfig
create mode 100644 doc/board/starfive/index.rst
create mode 100644 doc/board/starfive/visionfive2.rst
create mode 100644 drivers/clk/starfive/Kconfig
create mode 100644 drivers/clk/starfive/Makefile
create mode 100644 drivers/clk/starfive/clk-jh7110-pll.c
create mode 100644 drivers/clk/starfive/clk-jh7110.c
create mode 100644 drivers/clk/starfive/clk.h
create mode 100644 drivers/pinctrl/starfive/Kconfig
create mode 100644 drivers/pinctrl/starfive/Makefile
create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
create mode 100644 drivers/ram/starfive/Kconfig
create mode 100644 drivers/ram/starfive/Makefile
create mode 100644 drivers/ram/starfive/ddrcsr_boot.c
create mode 100644 drivers/ram/starfive/ddrphy_start.c
create mode 100644 drivers/ram/starfive/ddrphy_train.c
create mode 100644 drivers/ram/starfive/ddrphy_utils.c
create mode 100644 drivers/ram/starfive/starfive_ddr.c
create mode 100644 drivers/ram/starfive/starfive_ddr.h
create mode 100644 drivers/reset/reset-jh7110.c
create mode 100644 include/configs/starfive-visionfive2.h
create mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
create mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
Best regards,
Leo
next reply other threads:[~2023-04-21 0:41 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-21 0:41 Leo Liang [this message]
2023-04-23 16:15 ` [PULL] u-boot-riscv/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-07-12 6:58 Leo Liang
2023-07-12 19:43 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-03-16 2:56 Leo Liang
2022-03-16 14:48 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZEHbqoEXAB+BAtmo@ubuntu01 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox