rockpi-e sometimes fails to load u-boot.img

rockpi-e sometimes fails to load u-boot.img

[Belisko Marek]

Hello,

I'm using 2022.01 u-boot. Booting from SDcard sometimes shows up this log:
U-Boot SPL 2022.01 (Jan 10 2022 - 18:46:34 +0000)
Trying to boot from MMC2
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

and after reboot board boots fine. Is there any explanation why this
is happening pls?

Thanks and regards,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com

Re: rockpi-e sometimes fails to load u-boot.img

[John Keeping]

On Wed, Apr 26, 2023 at 11:35:19AM +0200, Belisko Marek wrote:
> I'm using 2022.01 u-boot. Booting from SDcard sometimes shows up this log:
> U-Boot SPL 2022.01 (Jan 10 2022 - 18:46:34 +0000)
> Trying to boot from MMC2
> Card did not respond to voltage select! : -110
> spl: mmc init failed with error: -95
> Trying to boot from MMC1
> mmc_load_image_raw_sector: mmc block read error
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
> 
> and after reboot board boots fine. Is there any explanation why this
> is happening pls?

I expect you're hitting the issue that was fixed in v2023.01 by commit
7ff2f30b63 ("mmc: dwmmc: only clear handled interrupts").

Have you tried using a more recent version of U-Boot?