rockpi-e sometimes fails to load u-boot.img

Belisko Marek
2023-04-26T11:10:12Z

Hello,

I'm using 2022.01 u-boot. Booting from SDcard sometimes shows up this log:
U-Boot SPL 2022.01 (Jan 10 2022 - 18:46:34 +0000)
Trying to boot from MMC2
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

and after reboot board boots fine. Is there any explanation why this
is happening pls?

Thanks and regards,

marek

--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com