From: Manuel Traut <manuel.traut@mt.com>
To: u-boot@lists.denx.de
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Philippe Schenker <philippe.schenker@toradex.com>,
janek.filus@mt.com
Subject: Booting verdin-imx8mm_defconfig fails
Date: Mon, 8 May 2023 13:49:36 +0200 [thread overview]
Message-ID: <ZFjh0DkhPD+CSkTt@mt.com> (raw)
Hi,
I am not able to run u-boot for the Toradex Verdin i.MX8MMini.
I am not sure if I built/using u-boot as intended for this platform.
DDR firmware used from:
https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
and arm-trusted-firmware 2.8.0
u-boot was built with the following commands:
--8<--
debian$ export CROSS_COMPILE=aarch64-linux-gnu-
debian$ export ARCH=arm64 BL31=/usr/lib/arm-trusted-firmware/imx8mm/bl31.bin
debian$ make verdin-imx8mm_defconfig
debian$ make -j6 flash.bin
--8<--
1) running via serial download:
===============================
--8<--
debian$ sudo uuu SDP: boot -f flash.bin
uuu (Universal Update Utility) for nxp imx chips -- lib1.4.193
Success 0 Failure 0
1:4 1/ 1 [=================100%=================] SDP: boot -f flash.bin
Okay
--8<--
Produces the following output:
--8<--
U-Boot SPL 2023.07-rc1-00199-g1917a1a8a8 (May 08 2023 - 13:11:50 +0200)
WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout)
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
--8<--
2) running from SDCard:
=======================
--8<--
debian$ sudo dd if=flash.bin of=/dev/sdb bs=1024 seek=33
1206+1 records in
1206+1 records out
1234992 bytes (1.2 MB, 1.2 MiB) copied, 0.260789 s, 4.7 MB/s
debian$ sync
--8<--
Pressing the 'recovery' switch while reseting the board:
Boots into Serial Download Mode
Just reseting the board:
Boots into Serial Download Mode
3) running from eMMC:
=====================
(no sdcard plugged in)
--8<--
imx8mm$ echo 0 > /sys/block/mmcblk1boot0/force_ro
imx8mm$ dd if=flash.bin of=/dev/mmcblk1boot0
imx8mm$ echo 1 > /sys/block/mmcblk1boot0/force_ro
imx8mm$ reboot
--8<--
Boots into Serial Download Mode
Any ideas?
Kind regards
Manuel
next reply other threads:[~2023-05-08 11:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-08 11:49 Manuel Traut [this message]
2023-05-09 7:14 ` Booting verdin-imx8mm_defconfig fails Marcel Ziswiler
2023-05-09 9:49 ` AW: " Traut Manuel LCPF-CH
2023-05-15 10:15 ` Marcel Ziswiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZFjh0DkhPD+CSkTt@mt.com \
--to=manuel.traut@mt.com \
--cc=janek.filus@mt.com \
--cc=marcel.ziswiler@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox