From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>, <ycliang@andestech.com>
Subject: [PULL] u-boot-riscv/master
Date: Wed, 12 Jul 2023 06:58:21 +0000 [thread overview]
Message-ID: <ZK5PDRgBEjEW+zj3@ubuntu01> (raw)
Hi Tom,
The following changes since commit 8e21064cb3452950b09301baec06d86e37342471:
Merge tag 'efi-2023-07-rc7' of https://source.denx.de/u-boot/custodians/u-boot-efi (2023-07-11 13:27:32 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git master
for you to fetch changes up to 478fedfda42ea2a444991de1696fa0adc8bb16d4:
doc: t-head: lpi4a: document Lichee PI 4A board (2023-07-12 13:21:41 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/16856
----------------------------------------------------------------
- Add ethernet driver for StarFive JH7110 SoC
- Add ACLINT mtimer and mswi devices support
- Add Lichee PI 4A board
----------------------------------------------------------------
Bin Meng (3):
riscv: timer: Update the sifive clint timer driver to support aclint
riscv: clint: Update the sifive clint ipi driver to support aclint
riscv: Rename SiFive CLINT to RISC-V ALINT
Yanhong Wang (11):
net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy
net: dwc_eth_qos: Add StarFive ethernet driver glue layer
riscv: dts: jh7110: Add ethernet device tree nodes
riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B
doc: board: starfive: Reword the make defconfig information
configs: starfive: Enable ethernet configuration for StarFive VisionFive2
eeprom: starfive: Enable ID EEPROM configuration
riscv: dts: starfive: Add support eeprom device tree node
configs: starfive: Enable ID EEPROM configuration
ram: starfive: Read memory size information from EEPROM
board: starfive: Dynamic configuration of DT for 1.2A and 1.3B
Yixun Lan (4):
riscv: t-head: licheepi4a: initial support added
riscv: dts: t-head: Add basic device tree for Sipeed Lichee PI 4A board
configs: th1520_lpi4a_defconfig: Add initial config
doc: t-head: lpi4a: document Lichee PI 4A board
MAINTAINERS | 2 +-
arch/riscv/Kconfig | 17 +++--
arch/riscv/cpu/fu540/Kconfig | 2 +-
arch/riscv/cpu/fu740/Kconfig | 2 +-
arch/riscv/cpu/generic/Kconfig | 4 +-
arch/riscv/cpu/jh7110/Kconfig | 2 +-
arch/riscv/cpu/jh7110/spl.c | 32 ++++++++-
arch/riscv/dts/Makefile | 4 +-
arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi => jh7110-starfive-visionfive-2-u-boot.dtsi} | 39 ++++++++++-
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts | 12 ----
arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi | 69 -------------------
arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.3b.dts => jh7110-starfive-visionfive-2.dts} | 3 +-
arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++
arch/riscv/dts/jh7110.dtsi | 69 +++++++++++++++++++
arch/riscv/dts/th1520-lichee-module-4a.dtsi | 34 +++++++++
arch/riscv/dts/th1520-lichee-pi-4a.dts | 32 +++++++++
arch/riscv/dts/th1520.dtsi | 406 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/riscv/include/asm/arch-jh7110/eeprom.h | 13 ++++
arch/riscv/include/asm/global_data.h | 4 +-
arch/riscv/include/asm/syscon.h | 2 +-
arch/riscv/lib/Makefile | 2 +-
arch/riscv/lib/{sifive_clint.c => aclint_ipi.c} | 31 +++++++--
board/openpiton/riscv64/Kconfig | 2 +-
board/sipeed/maix/Kconfig | 2 +-
board/starfive/visionfive2/Makefile | 1 +
board/starfive/visionfive2/spl.c | 157 ++++++++++++++++++++++++++++++++++++++++++
board/starfive/visionfive2/starfive_visionfive2.c | 13 ++++
board/starfive/visionfive2/visionfive2-i2c-eeprom.c | 561 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/thead/th1520_lpi4a/Kconfig | 42 ++++++++++++
board/thead/th1520_lpi4a/MAINTAINERS | 7 ++
board/thead/th1520_lpi4a/Makefile | 5 ++
board/thead/th1520_lpi4a/board.c | 15 ++++
configs/starfive_visionfive2_defconfig | 32 ++++++++-
configs/th1520_lpi4a_defconfig | 82 ++++++++++++++++++++++
doc/board/index.rst | 1 +
doc/board/starfive/visionfive2.rst | 6 +-
doc/board/thead/index.rst | 9 +++
doc/board/thead/lpi4a.rst | 129 +++++++++++++++++++++++++++++++++++
drivers/net/Kconfig | 7 ++
drivers/net/Makefile | 1 +
drivers/net/dwc_eth_qos.c | 6 ++
drivers/net/dwc_eth_qos.h | 1 +
drivers/net/dwc_eth_qos_starfive.c | 249 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/Kconfig | 6 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/motorcomm.c | 437 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/ram/starfive/starfive_ddr.c | 2 -
drivers/timer/Makefile | 2 +-
drivers/timer/riscv_aclint_timer.c | 74 ++++++++++++++++++++
drivers/timer/sifive_clint_timer.c | 68 ------------------
include/configs/qemu-riscv.h | 2 +-
include/configs/sifive-unleashed.h | 2 +-
include/configs/starfive-visionfive2.h | 1 +
include/configs/th1520_lpi4a.h | 22 ++++++
54 files changed, 2578 insertions(+), 188 deletions(-)
rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi => jh7110-starfive-visionfive-2-u-boot.dtsi} (58%)
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.3b.dts => jh7110-starfive-visionfive-2.dts} (65%)
create mode 100644 arch/riscv/dts/th1520-lichee-module-4a.dtsi
create mode 100644 arch/riscv/dts/th1520-lichee-pi-4a.dts
create mode 100644 arch/riscv/dts/th1520.dtsi
create mode 100644 arch/riscv/include/asm/arch-jh7110/eeprom.h
rename arch/riscv/lib/{sifive_clint.c => aclint_ipi.c} (53%)
create mode 100644 board/starfive/visionfive2/visionfive2-i2c-eeprom.c
create mode 100644 board/thead/th1520_lpi4a/Kconfig
create mode 100644 board/thead/th1520_lpi4a/MAINTAINERS
create mode 100644 board/thead/th1520_lpi4a/Makefile
create mode 100644 board/thead/th1520_lpi4a/board.c
create mode 100644 configs/th1520_lpi4a_defconfig
create mode 100644 doc/board/thead/index.rst
create mode 100644 doc/board/thead/lpi4a.rst
create mode 100644 drivers/net/dwc_eth_qos_starfive.c
create mode 100644 drivers/net/phy/motorcomm.c
create mode 100644 drivers/timer/riscv_aclint_timer.c
delete mode 100644 drivers/timer/sifive_clint_timer.c
create mode 100644 include/configs/th1520_lpi4a.h
Best regards,
Leo
next reply other threads:[~2023-07-12 6:58 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 6:58 Leo Liang [this message]
2023-07-12 19:43 ` [PULL] u-boot-riscv/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-04-21 0:41 Leo Liang
2023-04-23 16:15 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-03-16 2:56 Leo Liang
2022-03-16 14:48 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZK5PDRgBEjEW+zj3@ubuntu01 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox