public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
To: Maxim Uvarov <maxim.uvarov@linaro.org>
Cc: u-boot@lists.denx.de, pbrobinson@redhat.com,
	joe.hershberger@ni.com, rfried.dev@gmail.com, trini@konsulko.com,
	goldsimon@gmx.de, lwip-devel@nongnu.org
Subject: Re: [PATCHv6 11/14] net/lwip: connection between cmd and lwip apps
Date: Wed, 16 Aug 2023 12:12:40 +0300	[thread overview]
Message-ID: <ZNyTCPvgxbNn3+ir@hades> (raw)
In-Reply-To: <20230814133253.4150-12-maxim.uvarov@linaro.org>

On Mon, Aug 14, 2023 at 07:32:50PM +0600, Maxim Uvarov wrote:

Commit message missing again

> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
> ---
>  cmd/Makefile   |   1 +
>  cmd/net-lwip.c | 306 +++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 307 insertions(+)
>  create mode 100644 cmd/net-lwip.c
> +static int do_lwip_init(struct cmd_tbl *cmdtp, int flag, int argc,
> +		      char *const argv[])
> +{
> +	if (!ulwip_init())
> +		return CMD_RET_SUCCESS;
> +	return CMD_RET_FAILURE;
> +}
> +
> +static int lwip_empty_tmo(void) { return 0; };
> +int (*ulwip_tmo)(void) = lwip_empty_tmo;
> +void ulwip_set_tmo(int (*tmo)(void))
> +{
> +	ulwip_tmo = tmo;
> +}
> +
> +static void ulwip_clear_tmo(void)
> +{
> +	ulwip_tmo = lwip_empty_tmo;
> +}
> +
> +static void ulwip_timeout_handler(void)

We discussed this in the previous patchset but I am not convinced this is
the best approach.  Instead of setting the callback function on the dhcp
and ping commands and calling a function pointer here,  just define
discrete function and set them during net_set_timeout_handler()
if there is common code like eth_halt() etc just create a function with
them

> +{
> +	eth_halt();
> +	ulwip_tmo();
> +	net_set_state(NETLOOP_FAIL);	/* we did not get the reply */
> +	ulwip_loop_set(0);
> +}
> +
> +int ulwip_loop(void)
> +{
> +	int ret = CMD_RET_FAILURE;
> +
> +	ulwip_loop_set(1);
> +	if (!net_loop(LWIP))
> +		ret = CMD_RET_SUCCESS;
> +	ulwip_loop_set(0);
> +	return ret;
> +}
> +
> +#if defined(CONFIG_CMD_PING)
> +int do_lwip_ping(struct cmd_tbl *cmdtp, int flag, int argc,
> +		 char *const argv[])
> +{
> +	int ret;
> +
> +	if (argc < 2) {
> +		printf("argc = %d, error\n", argc);
> +		return CMD_RET_USAGE;
> +	}
> +
> +	ret = ulwip_init();
> +	if (ret) {
> +		log_err("ulwip_init err %d\n", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	printf("Using %s device\n", eth_get_name());
> +	printf("pinging addr: %s\n", argv[1]);
> +
> +	net_set_timeout_handler(1000UL, ulwip_timeout_handler);
> +
> +	if (ulwip_ping(argv[1])) {
> +		printf("ping init fail\n");
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	return ulwip_loop();
> +}
> +#endif /* CONFIG_CMD_PING */
> +
> +#if defined(CONFIG_CMD_WGET)
> +int do_lwip_wget(struct cmd_tbl *cmdtp, int flag, int argc,
> +		 char *const argv[])
> +{
> +	char *url;
> +	int ret;
> +
> +	if (argc < 2)
> +		return CMD_RET_USAGE;
> +
> +	url = argv[1];
> +
> +	ret = ulwip_init();
> +	if (ret) {
> +		log_err("ulwip_init err %d\n", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	ret = ulwip_wget(image_load_addr, url);
> +	if (ret) {
> +		log_err("lwip_wget err %d\n", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +
> +	return ulwip_loop();
> +}
> +#endif
> +
> +#if defined(CONFIG_CMD_TFTPBOOT)
> +int do_lwip_tftp(struct cmd_tbl *cmdtp, int flag, int argc,
> +		 char *const argv[])
> +{
> +	char *filename;
> +	ulong addr;
> +	char *end;
> +	int ret;
> +
> +	switch (argc) {
> +	case 1:
> +		filename = env_get("bootfile");
> +		break;
> +	case 2:
> +		/*
> +		 * Only one arg - accept two forms:
> +		 * Just load address, or just boot file name. The latter
> +		 * form must be written in a format which can not be
> +		 * mis-interpreted as a valid number.
> +		 */
> +		addr = hextoul(argv[1], &end);
> +		if (end == (argv[1] + strlen(argv[1]))) {
> +			image_load_addr = addr;
> +			filename = env_get("bootfile");
> +		} else {
> +			filename = argv[1];
> +		}
> +		break;
> +	case 3:
> +		image_load_addr = hextoul(argv[1], NULL);
> +		filename = argv[2];
> +		break;
> +	default:
> +		return CMD_RET_USAGE;
> +	}
> +
> +	ret = ulwip_init();
> +	if (ret) {
> +		log_err("ulwip_init err %d\n", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	ret = ulwip_tftp(image_load_addr, filename);

filename can be NULL.  We went through this on v4 as well.  Go through all
the comments and fix them before v6. 

> +	if (ret)
> +		return ret;
> +
> +	return ulwip_loop();
> +}
> +#endif /* CONFIG_CMD_TFTPBOOT */
> +
> +#if defined(CONFIG_CMD_DHCP)
> +int do_lwip_dhcp(void)
> +{
> +	int ret;
> +	char *filename;
> +
> +	ret = ulwip_init();
> +	if (ret) {
> +		log_err("ulwip_init err %d\n", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	ret = ulwip_dhcp();
> +
> +	net_set_timeout_handler(2000UL, ulwip_timeout_handler);
> +
> +	ulwip_loop();
> +	if (IS_ENABLED(CONFIG_CMD_TFTPBOOT)) {
> +		ulwip_clear_tmo();
> +
> +		filename = env_get("bootfile");
> +		if (!filename) {
> +			log_notice("no bootfile\n");
> +			return CMD_RET_SUCCESS;
> +		}
> +
> +		ret = ulwip_init();
> +		if (ret) {
> +			log_err("ulwip_init err %d\n", ret);
> +			return CMD_RET_FAILURE;
> +		}
> +
> +		net_set_timeout_handler(20000UL, ulwip_timeout_handler);
> +		ulwip_tftp(image_load_addr, filename);
> +
> +		ret =  ulwip_loop();
> +	}
> +
> +	return ret;
> +}
> +
> +static int _do_lwip_dhcp(struct cmd_tbl *cmdtp, int flag, int argc,
> +		char *const argv[])
> +{
> +	return do_lwip_dhcp();
> +}
> +#endif /* CONFIG_CMD_DHCP */
> +
> +#if defined(CONFIG_CMD_DNS)
> +int do_lwip_dns(struct cmd_tbl *cmdtp, int flag, int argc,
> +		char *const argv[])
> +{
> +	int ret;
> +	char *name;
> +	char *varname;
> +	int LWIP_ERR_INPROGRESS = -5; /* lwip/err.h */
> +
> +	if (argc == 1)
> +		return CMD_RET_USAGE;
> +
> +	name = argv[1];
> +
> +	if (argc == 3)
> +		varname = argv[2];
> +	else
> +		varname = NULL;
> +
> +	ret = ulwip_init();
> +	if (ret) {
> +		log_err("ulwip_init err %d\n", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	ret = ulwip_dns(name, varname);
> +	if (ret == 0)
> +		return CMD_RET_SUCCESS;
> +	if (ret != LWIP_ERR_INPROGRESS)
> +		return CMD_RET_FAILURE;
> +
> +	net_set_timeout_handler(1000UL, ulwip_timeout_handler);
> +
> +	return ulwip_loop();
> +}
> +#endif /* CONFIG_CMD_DNS */
> +
> +static struct cmd_tbl cmds[] = {
> +	U_BOOT_CMD_MKENT(init, 1, 0, do_lwip_init,
> +			 "initialize lwip stack", ""),
> +#if defined(CONFIG_CMD_PING)
> +	U_BOOT_CMD_MKENT(ping, 2, 0, do_lwip_ping,
> +			 "send ICMP ECHO_REQUEST to network host",
> +			 "pingAddress"),
> +#endif
> +#if defined(CONFIG_CMD_WGET)
> +	U_BOOT_CMD_MKENT(wget, 2, 0, do_lwip_wget, "", ""),
> +#endif
> +#if defined(CONFIG_CMD_TFTPBOOT)
> +	U_BOOT_CMD_MKENT(tftp, 3, 0, do_lwip_tftp,
> +			"boot image via network using TFTP protocol\n",
> +			"[loadAddress] [[hostIPaddr:]bootfilename]"),
> +#endif
> +#if defined(CONFIG_CMD_DHCP)
> +	U_BOOT_CMD_MKENT(dhcp, 1, 0, _do_lwip_dhcp,
> +			"boot image via network using DHCP/TFTP protocol",
> +			""),
> +#endif
> +#if defined(CONFIG_CMD_DNS)
> +	U_BOOT_CMD_MKENT(dns, 3, 0, do_lwip_dns,
> +			 "lookup dns name [and store address at variable]",
> +			 ""),
> +#endif
> +};
> +
> +static int do_ops(struct cmd_tbl *cmdtp, int flag, int argc,
> +		     char *const argv[])
> +{
> +	struct cmd_tbl *cp;
> +
> +	cp = find_cmd_tbl(argv[1], cmds, ARRAY_SIZE(cmds));
> +
> +	argc--;
> +	argv++;
> +
> +	if (cp == NULL || argc > cp->maxargs)
> +		return CMD_RET_USAGE;
> +	if (flag == CMD_FLAG_REPEAT && !cmd_is_repeatable(cp))
> +		return CMD_RET_SUCCESS;
> +
> +	return cp->cmd(cmdtp, flag, argc, argv);
> +}
> +
> +U_BOOT_CMD(
> +	lwip, 4, 1, do_ops,
> +	"LWIP sub system",
> +	"init - init LWIP\n"
> +	"ping addr - pingAddress\n"
> +	"wget http://IPadress/url/\n"
> +	"tftp [loadAddress] [[hostIPaddr:]bootfilename]\n"
> +	"dhcp - boot image via network using DHCP/TFTP protocol\n"
> +	);
> -- 
> 2.30.2
> 

Thanks
/Ilias

  reply	other threads:[~2023-08-16  9:12 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-14 13:32 [PATCHv6 00/14] net/lwip: add lwip library for the network stack Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 01/14] net/lwip: add doc/develop/net_lwip.rst Maxim Uvarov
2023-08-14 14:10   ` Ilias Apalodimas
2023-08-14 13:32 ` [PATCHv6 02/14] net/lwip: integrate lwIP library Maxim Uvarov
2023-08-14 14:13   ` Ilias Apalodimas
2023-08-14 13:32 ` [PATCHv6 03/14] net/lwip: implement dns cmd Maxim Uvarov
2023-08-14 14:19   ` Ilias Apalodimas
2023-08-14 15:15     ` Maxim Uvarov
2023-08-15 12:42     ` Maxim Uvarov
2023-08-15 14:42       ` Tom Rini
2023-08-16 10:26         ` Ilias Apalodimas
2023-08-16 11:01           ` Maxim Uvarov
2023-08-16 11:54             ` Ilias Apalodimas
2023-08-16 12:24               ` Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 04/14] net/lwip: implement dhcp cmd Maxim Uvarov
2023-08-14 14:21   ` Ilias Apalodimas
2023-08-14 15:18     ` Maxim Uvarov
2023-08-14 15:29       ` Tom Rini
2023-08-17 13:46         ` Maxim Uvarov
2023-08-17 14:04           ` Peter Robinson
2023-08-17 14:55             ` Maxim Uvarov
2023-08-17 15:10               ` Tom Rini
2023-08-18  9:39                 ` Maxim Uvarov
2023-08-18 11:14                   ` Peter Robinson
2023-08-18 14:24                     ` Tom Rini
2023-08-14 13:32 ` [PATCHv6 05/14] net/lwip: implement tftp cmd Maxim Uvarov
2023-08-14 14:25   ` Ilias Apalodimas
2023-08-14 18:54     ` Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 06/14] net/lwip: implement wget cmd Maxim Uvarov
2023-08-16  8:38   ` Ilias Apalodimas
2023-08-14 13:32 ` [PATCHv6 07/14] net/lwip: implement ping cmd Maxim Uvarov
2023-08-16  8:42   ` Ilias Apalodimas
2023-08-16  9:09     ` Maxim Uvarov
2023-08-16 14:39       ` Simon Glass
2023-08-16 20:15         ` Maxim Uvarov
2023-08-18  3:10           ` Simon Glass
2023-08-18  9:27             ` Maxim Uvarov
2023-08-22 18:56               ` Simon Glass
2023-08-14 13:32 ` [PATCHv6 08/14] net/lwip: add lwIP configuration Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 09/14] net/lwip: implement lwIP port to U-Boot Maxim Uvarov
2023-08-16  9:01   ` Ilias Apalodimas
2023-08-18 12:53     ` Maxim Uvarov
2023-08-18 18:21       ` Simon Goldschmidt
2023-08-14 13:32 ` [PATCHv6 10/14] net/lwip: update .gitignore with lwIP Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 11/14] net/lwip: connection between cmd and lwip apps Maxim Uvarov
2023-08-16  9:12   ` Ilias Apalodimas [this message]
2023-08-14 13:32 ` [PATCHv6 12/14] net/lwip: replace original net commands with lwip Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 13/14] net/lwip: split net.h to net.h, arp.h and eth.h Maxim Uvarov
2023-08-14 13:32 ` [PATCHv6 14/14] net/lwip: drop old net/wget Maxim Uvarov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZNyTCPvgxbNn3+ir@hades \
    --to=ilias.apalodimas@linaro.org \
    --cc=goldsimon@gmx.de \
    --cc=joe.hershberger@ni.com \
    --cc=lwip-devel@nongnu.org \
    --cc=maxim.uvarov@linaro.org \
    --cc=pbrobinson@redhat.com \
    --cc=rfried.dev@gmail.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox