From: Yu-Chien Peter Lin <peterlin@andestech.com>
To: Leo Yu-Chi Liang <ycliang@andestech.com>
Cc: <u-boot@lists.denx.de>, <randolph@andestech.com>
Subject: Re: [PATCH v2 2/6] andes: ae350: Implement cache switch via Kconfig
Date: Tue, 26 Dec 2023 15:34:56 +0800 [thread overview]
Message-ID: <ZYqCIE81m07KprNc@APC323> (raw)
In-Reply-To: <20231226061736.482416-2-ycliang@andestech.com>
On Tue, Dec 26, 2023 at 02:17:33PM +0800, Leo Yu-Chi Liang wrote:
> Kconfig provides SYS_[I|D]CACHE_OFF config options to switch off caches.
> Provide the corresponding implementation to the options.
>
> Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
> ---
> arch/riscv/cpu/andesv5/cpu.c | 25 ++++++++++++++++---------
> board/AndesTech/ae350/ae350.c | 3 ++-
> 2 files changed, 18 insertions(+), 10 deletions(-)
>
> diff --git a/arch/riscv/cpu/andesv5/cpu.c b/arch/riscv/cpu/andesv5/cpu.c
> index 63bc24cdfc..e764f6c5c0 100644
> --- a/arch/riscv/cpu/andesv5/cpu.c
> +++ b/arch/riscv/cpu/andesv5/cpu.c
> @@ -32,18 +32,25 @@ void harts_early_init(void)
> if (CONFIG_IS_ENABLED(RISCV_MMODE)) {
> unsigned long mcache_ctl_val = csr_read(CSR_MCACHE_CTL);
>
> - mcache_ctl_val |= (MCACHE_CTL_DC_COHEN | MCACHE_CTL_IC_EN |
> - MCACHE_CTL_DC_EN | MCACHE_CTL_CCTL_SUEN);
> + mcache_ctl_val |= MCACHE_CTL_CCTL_SUEN;
> +
> + if (!CONFIG_IS_ENABLED(SYS_ICACHE_OFF))
> + mcache_ctl_val |= MCACHE_CTL_IC_EN;
> +
> + if (!CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
> + mcache_ctl_val |= (MCACHE_CTL_DC_EN | MCACHE_CTL_DC_COHEN);
>
> csr_write(CSR_MCACHE_CTL, mcache_ctl_val);
>
> - /*
> - * Check mcache_ctl.DC_COHEN, we assume this platform does
> - * not support CM if the bit is hard-wired to 0.
> - */
> - if (csr_read(CSR_MCACHE_CTL) & MCACHE_CTL_DC_COHEN) {
> - /* Wait for DC_COHSTA bit to be set */
> - while (!(csr_read(CSR_MCACHE_CTL) & MCACHE_CTL_DC_COHSTA));
> + if (!CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) {
> + /*
> + * Check mcache_ctl.DC_COHEN, we assume this platform does
> + * not support CM if the bit is hard-wired to 0.
> + */
> + if (csr_read(CSR_MCACHE_CTL) & MCACHE_CTL_DC_COHEN) {
> + /* Wait for DC_COHSTA bit to be set */
> + while (!(csr_read(CSR_MCACHE_CTL) & MCACHE_CTL_DC_COHSTA));
> + }
> }
> }
> }
> diff --git a/board/AndesTech/ae350/ae350.c b/board/AndesTech/ae350/ae350.c
> index 772c6bf1ee..bef9e3149e 100644
> --- a/board/AndesTech/ae350/ae350.c
> +++ b/board/AndesTech/ae350/ae350.c
> @@ -102,7 +102,8 @@ void *board_fdt_blob_setup(int *err)
> void spl_board_init()
> {
> /* enable v5l2 cache */
> - enable_caches();
> + if (!CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
> + enable_caches();
> }
> #endif
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-12-26 7:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-26 6:17 [PATCH v2 1/6] andes: csr.h: Clean up CSR definition Leo Yu-Chi Liang
2023-12-26 6:17 ` [PATCH v2 2/6] andes: ae350: Implement cache switch via Kconfig Leo Yu-Chi Liang
2023-12-26 7:34 ` Yu-Chien Peter Lin [this message]
2023-12-26 6:17 ` [PATCH v2 3/6] andes: cpu: Enable memboost feature Leo Yu-Chi Liang
2023-12-26 7:42 ` Yu-Chien Peter Lin
2023-12-26 6:17 ` [PATCH v2 4/6] andes: cpu: Enable cache and TLB ECC support Leo Yu-Chi Liang
2023-12-26 7:43 ` Yu-Chien Peter Lin
2023-12-26 7:33 ` [PATCH v2 1/6] andes: csr.h: Clean up CSR definition Yu-Chien Peter Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZYqCIE81m07KprNc@APC323 \
--to=peterlin@andestech.com \
--cc=randolph@andestech.com \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox