public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paulk@sys-base.io>
To: Quentin Schulz <foss+uboot@0leil.net>
Cc: Tom Rini <trini@konsulko.com>, Simon Glass <sjg@chromium.org>,
	Philipp Tomsich <philipp.tomsich@vrull.eu>,
	Kever Yang <kever.yang@rock-chips.com>,
	Klaus Goger <klaus.goger@cherry.de>,
	u-boot@lists.denx.de, Paul Kocialkowski <contact@paulk.fr>,
	Quentin Schulz <quentin.schulz@cherry.de>
Subject: Re: [PATCH next 5/5] rockchip: configs: puma-rk3399: do the system reset in TPL
Date: Tue, 5 Nov 2024 19:40:30 +0100	[thread overview]
Message-ID: <ZypmnjLPPZ9aC26c@collins> (raw)
In-Reply-To: <20241105-rk3399-sysreset-gpio-tpl-v1-5-12caff07a4e4@cherry.de>

[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]

Hi,

Le Tue 05 Nov 24, 16:36, Quentin Schulz a écrit :
> From: Quentin Schulz <quentin.schulz@cherry.de>
> 
> RK3399 Puma can trigger a full system reset at runtime by toggling a
> GPIO. This is done whenever the system has NOT cold booted (i.e. from a
> power cycle). For RK3399 Puma, this is currently done in SPL but only
> because when this was implemented TPL wasn't used on RK3399 (or at least
> not Puma). Now that we have TPL on RK3399 (and Puma), it makes sense to
> trigger this reset as early as possible, so let's enable the drivers
> required in TPL (Rockchip GPIO and pinctrl).
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>

Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>

Cheers,

Paul

> ---
>  configs/puma-rk3399_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index 67c0ee72c925cdd49066980b0fde4131c86a99a8..7a180b1413036234d834773778f6c0f0a7e85380 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -30,6 +30,7 @@ CONFIG_SPL_I2C=y
>  CONFIG_SPL_POWER=y
>  CONFIG_SPL_SPI_LOAD=y
>  CONFIG_TPL=y
> +CONFIG_TPL_GPIO=y
>  # CONFIG_BOOTM_NETBSD is not set
>  # CONFIG_BOOTM_PLAN9 is not set
>  # CONFIG_BOOTM_RTEMS is not set
> @@ -78,6 +79,8 @@ CONFIG_ETH_DESIGNWARE=y
>  CONFIG_GMAC_ROCKCHIP=y
>  CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>  CONFIG_PHY_ROCKCHIP_TYPEC=y
> +CONFIG_TPL_PINCTRL=y
> +CONFIG_TPL_PINCTRL_FULL=y
>  CONFIG_DM_PMIC_FAN53555=y
>  CONFIG_PMIC_RK8XX=y
>  CONFIG_SPL_PMIC_RK8XX=y
> 
> -- 
> 2.47.0
> 

-- 
Paul Kocialkowski,

Independent contractor - sys-base - https://www.sys-base.io/
Free software developer - https://www.paulk.fr/

Specialist in multimedia, graphics and embedded hardware support with Linux.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2024-11-05 18:40 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-05 15:36 [PATCH next 0/5] rockchip: rk3399: allow to trigger sysreset in TPL Quentin Schulz
2024-11-05 15:36 ` [PATCH next 1/5] pinctrl: rockchip: allow to build for TPL Quentin Schulz
2024-11-05 18:34   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 2/5] rockchip: rk3399: merge CRU check within rk3399_force_power_on_reset Quentin Schulz
2024-11-05 18:36   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 3/5] rockchip: tpl: allow to call board/SoC-specific code before DRAM init Quentin Schulz
2024-11-05 18:37   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 4/5] rockchip: rk3399: allow to handle sysreset-gpio in TPL Quentin Schulz
2024-11-05 18:40   ` Paul Kocialkowski
2024-11-05 18:44   ` Paul Kocialkowski
2024-11-05 15:36 ` [PATCH next 5/5] rockchip: configs: puma-rk3399: do the system reset " Quentin Schulz
2024-11-05 18:40   ` Paul Kocialkowski [this message]
2024-11-05 18:45 ` [PATCH next 0/5] rockchip: rk3399: allow to trigger sysreset " Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZypmnjLPPZ9aC26c@collins \
    --to=paulk@sys-base.io \
    --cc=contact@paulk.fr \
    --cc=foss+uboot@0leil.net \
    --cc=kever.yang@rock-chips.com \
    --cc=klaus.goger@cherry.de \
    --cc=philipp.tomsich@vrull.eu \
    --cc=quentin.schulz@cherry.de \
    --cc=sjg@chromium.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox