From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Mon, 10 Apr 2017 21:07:56 +0200
Subject: [U-Boot] [PATCH v6 1/3] arm: dts: update Meson GXBB / Odroid-C2
 DT with latest Linux version
In-Reply-To: <1491850980.1222.4.camel@gmail.com>
References: <1491850980.1222.4.camel@gmail.com>
Message-ID: <a575c65a-e8f8-47bf-eaff-ddcb97c7c4b3@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Am 10.04.2017 um 21:03 schrieb felix zihlmann:
> Hi,
> 
> I have tried this patch-set (applied to u-boot-2017.03) on a Odroid-C2.
> Booting from SD card works fine. However booting form eMMC card (128GB
> from Hardkernel) produces the following error:
> 
> => fatload mmc 0:1 ${initrd_loadaddr} ${initrdfile}
> Card did not respond to voltage select!
> mmc_init: -95, time 9
> ** Bad device mmc 0 **

mmc 0 is the SD slot. When doing "mmc list" you should see:

=> mmc list
mmc at 72000: 0
mmc at 74000: 1 (eMMC)

So you have to do "fatload mmc 1:1 ......."

Heiner

> Setting max-frequency to 60MHz does not help.
> 
> Booting from the eMMC card using the Hardkernel u-boot and the
> Hardkernel kernel works fine.
> 
> Thanks!
> 
> Felix
> 
>