public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Dinh Nguyen <dinguyen@kernel.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 14/19] arm: socfpga: Add SPL support for Arria 10
Date: Mon, 10 Apr 2017 15:43:37 -0500	[thread overview]
Message-ID: <a8eaaf30-097d-4cda-0dbf-d2a6bfee0d59@kernel.org> (raw)
In-Reply-To: <1491384774-49629-15-git-send-email-ley.foon.tan@intel.com>



On 04/05/2017 04:32 AM, Ley Foon Tan wrote:
> Add SPL support for Arria 10.
> 
> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
> ---
>  arch/arm/mach-socfpga/spl.c | 74 ++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 69 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
> index 69c433c..e1e62c2 100644
> --- a/arch/arm/mach-socfpga/spl.c
> +++ b/arch/arm/mach-socfpga/spl.c
> @@ -19,23 +19,32 @@
>  #include <asm/arch/sdram.h>
>  #include <asm/arch/scu.h>
>  #include <asm/arch/nic301.h>
> +#include <asm/sections.h>
> +#include <fdtdec.h>
> +#include <watchdog.h>
> +#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> +#include <asm/arch/pinmux.h>
> +#endif
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  static struct pl310_regs *const pl310 =
>  	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
>  static struct scu_registers *scu_regs =
>  	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
>  static struct nic301_registers *nic301_regs =
>  	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
> -static struct socfpga_system_manager *sysmgr_regs =
> +#endif
> +
> +static const struct socfpga_system_manager *sysmgr_regs =
>  	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
>  
>  u32 spl_boot_device(void)
>  {
>  	const u32 bsel = readl(&sysmgr_regs->bootinfo);
>  
> -	switch (bsel & 0x7) {
> +	switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
>  	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
>  		return BOOT_DEVICE_RAM;
>  	case 0x2:	/* NAND Flash (1.8V) */
> @@ -68,6 +77,7 @@ u32 spl_boot_mode(const u32 boot_device)
>  }
>  #endif
>  
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  static void socfpga_nic301_slave_ns(void)
>  {
>  	writel(0x1, &nic301_regs->lwhps2fpgaregs);
> @@ -85,6 +95,7 @@ void board_init_f(ulong dummy)
>  #endif
>  	unsigned long sdram_size;
>  	unsigned long reg;
> +	int ret;
>  
>  	/*
>  	 * First C code to run. Clear fake OCRAM ECC first as SBE
> @@ -117,7 +128,11 @@ void board_init_f(ulong dummy)
>  	/* Put everything into reset but L4WD0. */
>  	socfpga_per_reset_all();
>  	/* Put FPGA bridges into reset too. */
> -	socfpga_bridges_reset(1);
> +	ret = socfpga_bridges_reset(1);
> +	if (ret) {
> +		printf("socfpga_bridges_reset() failed: %d\n", ret);
> +		hang();
> +	}
>  
>  	socfpga_per_reset(SOCFPGA_RESET(SDR), 0);
>  	socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
> @@ -150,7 +165,11 @@ void board_init_f(ulong dummy)
>  
>  	/* De-assert reset for peripherals and bridges based on handoff */
>  	reset_deassert_peripherals_handoff();
> -	socfpga_bridges_reset(0);
> +	ret = socfpga_bridges_reset(0);
> +	if (ret) {
> +		printf("socfpga_bridges_reset() failed: %d\n", ret);
> +		hang();
> +	}
>  
>  	debug("Unfreezing/Thaw all I/O banks\n");
>  	/* unfreeze / thaw all IO banks */
> @@ -180,8 +199,53 @@ void board_init_f(ulong dummy)
>  		hang();
>  	}
>  
> -	socfpga_bridges_reset(1);
> +	ret = socfpga_bridges_reset(1);
> +	if (ret) {
> +		printf("socfpga_bridges_reset() failed: %d\n", ret);
> +		hang();
> +	}
>  
>  	/* Configure simple malloc base pointer into RAM. */
>  	gd->malloc_base = CONFIG_SYS_TEXT_BASE + (1024 * 1024);
>  }
> +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> +#ifdef CONFIG_SPL_BOARD_INIT
> +void spl_board_init(void)

Don't need to add another check for SPL_BOARD_INIT, it's already defined
for CONFIG_TARGET_SOCFPGA_ARRIA10.

Dinh

  reply	other threads:[~2017-04-10 20:43 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-05  9:32 [U-Boot] [PATCH v4 00/19] Add Intel Arria 10 SoC support Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 01/19] arm: socfpga: Restructure clock manager driver Ley Foon Tan
2017-04-05 19:12   ` Dinh Nguyen
2017-04-06  8:31     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 02/19] arm: socfpga: Restructure reset " Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 03/19] arm: socfpga: Restructure system manager Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 04/19] arm: socfpga: Restructure misc driver Ley Foon Tan
2017-04-05 10:39   ` Marek Vasut
2017-04-06  5:37     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 05/19] arm: socfpga: Add A10 macros Ley Foon Tan
2017-04-06 14:10   ` Dinh Nguyen
2017-04-07  0:32     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 06/19] arm: socfpga: Add reset driver support for Arria 10 Ley Foon Tan
2017-04-06 19:37   ` Dinh Nguyen
2017-04-07  7:43     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 07/19] arm: socfpga: Add clock driver " Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 08/19] arm: socfpga: Add system manager " Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 09/19] arm: socfpga: Add sdram header file " Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 10/19] arm: socfpga: Add misc support " Ley Foon Tan
2017-04-05 10:40   ` Marek Vasut
2017-04-06  3:20     ` Ley Foon Tan
2017-04-06 10:17       ` Marek Vasut
2017-04-07  0:33         ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 11/19] arm: socfpga: Add pinmux " Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 12/19] fdt: Add compatible strings " Ley Foon Tan
2017-04-05 10:41   ` Marek Vasut
2017-04-15 16:06   ` Simon Glass
2017-04-05  9:32 ` [U-Boot] [PATCH v4 13/19] arm: dts: Add dts and dtsi " Ley Foon Tan
2017-04-10 14:50   ` Dinh Nguyen
2017-04-11  5:50     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 14/19] arm: socfpga: Add SPL support " Ley Foon Tan
2017-04-10 20:43   ` Dinh Nguyen [this message]
2017-04-10 22:05     ` Dinh Nguyen
2017-04-11  3:42       ` Dinh Nguyen
2017-04-11  5:48         ` Ley Foon Tan
2017-04-11 12:28           ` Dinh Nguyen
2017-04-11 10:35         ` Marek Vasut
2017-04-11  5:45     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 15/19] drivers: fpga: Add compile switch for Gen5 only registers Ley Foon Tan
2017-04-07 14:26   ` Dinh Nguyen
2017-04-10  7:44     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 16/19] arm: socfpga: Convert Altera DDR SDRAM driver to use Kconfig Ley Foon Tan
2017-04-05 10:44   ` Marek Vasut
2017-04-05  9:32 ` [U-Boot] [PATCH v4 17/19] arm: socfpga: Add config and defconfig for Arria 10 Ley Foon Tan
2017-04-07 14:17   ` Dinh Nguyen
2017-04-10  7:40     ` Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 18/19] arm: socfpga: Add board files for the Arria10 Ley Foon Tan
2017-04-05  9:32 ` [U-Boot] [PATCH v4 19/19] arm: socfpga: Enable build for Arria 10 Ley Foon Tan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a8eaaf30-097d-4cda-0dbf-d2a6bfee0d59@kernel.org \
    --to=dinguyen@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox