From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>, <ycliang@andestech.com>
Subject: [GIT PULL] u-boot-riscv/master
Date: Fri, 25 Apr 2025 18:07:54 +0800 [thread overview]
Message-ID: <aAte-nS8ZhO_Odw1@swlinux02> (raw)
Hi Tom,
The following changes since commit 10f48365112b164bee6564033ab682747efcb483:
Merge patch series "Add PCIe support for TI AM64 SoC" (2025-04-24 10:46:17 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to 5ac699efe94f24df561d33e420d3c73f5fb797e8:
board: starfive: visionfive2: Order board detection logic to match config (2025-04-25 17:04:09 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/25940
----------------------------------------------------------------
- riscv: lib: Simplify FDT retrieving process
- board: k1: pinctrl: Add pinctrl support for bananapi-f3
- binman: riscv: Fix binman_sym functionality
- board: starfive: visionfive2: Reorder board detection logic
- board: starfive: Add DeepComputing FML13V01 support
----------------------------------------------------------------
E Shattow (2):
doc: board: starfive: visionfive2: add missing format command to Flashing
board: starfive: visionfive2: Order board detection logic to match config
Heinrich Schuchardt (9):
configs: qemu-riscv raise CONFIG_NR_DRAM_BANKS
configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig
riscv: dts: jh7110: add DeepComputing FML13V01 device-tree
board: starfive: DeepComputing FML13V01 fdt selection
board: starfive: spl: support DeepComputing FML13V01
doc: add DeepComputing FML13V01 documentation
doc: starfive: use consistent formatting
doc: starfive: use jh7110_common.rst
doc: jh7110: describe debug UART
Huan Zhou (2):
riscv: dts: k1: add pinctrl property in dts.
config: Enable pinctrl in bananapi-f3
Minda Chen (1):
MAINTAINERS: visionfive2: Add match N: starfive pattern
Yao Zi (7):
riscv: lib: Add a default implementation of board_fdt_blob_setup
board: qemu: riscv: Remove duplicated board_fdt_blob_setup
board: starfive: Remove duplicated board_fdt_blob_setup
board: sifive: Remove dead board_fdt_blob_setup
riscv: dts: binman.dtsi: Switch to u-boot-nodtb entry for proper U-Boot
riscv: dts: starfive: Prevent binman from relocating symbols in SPL
riscv: Provide __image_copy_{start_end} symbols in linkerscript
arch/riscv/cpu/u-boot-spl.lds | 2 +
arch/riscv/cpu/u-boot.lds | 3 +
arch/riscv/dts/binman.dtsi | 2 +-
.../dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi | 7 ++
arch/riscv/dts/k1-bananapi-f3.dts | 3 +
arch/riscv/dts/k1-pinctrl.dtsi | 19 ++++
arch/riscv/dts/k1.dtsi | 8 +-
arch/riscv/dts/starfive-visionfive2-binman.dtsi | 1 +
arch/riscv/lib/Makefile | 1 +
arch/riscv/lib/board.c | 19 ++++
board/emulation/qemu-riscv/qemu-riscv.c | 8 --
board/sifive/unleashed/unleashed.c | 11 ---
board/sifive/unmatched/unmatched.c | 10 --
board/starfive/visionfive2/MAINTAINERS | 2 +-
board/starfive/visionfive2/spl.c | 43 +++++----
board/starfive/visionfive2/starfive_visionfive2.c | 16 +---
configs/bananapi-f3_defconfig | 2 +
configs/qemu-riscv32_defconfig | 1 -
configs/qemu-riscv32_smode_defconfig | 1 -
configs/qemu-riscv32_spl_defconfig | 1 -
configs/qemu-riscv64_defconfig | 1 -
configs/qemu-riscv64_smode_defconfig | 1 -
configs/qemu-riscv64_spl_defconfig | 1 -
configs/starfive_visionfive2_defconfig | 2 +-
doc/board/starfive/deepcomputing_fml13v01.rst | 80 ++++++++++++++++
doc/board/starfive/index.rst | 1 +
doc/board/starfive/jh7110_common.rst | 103 +++++++++++++++++++++
doc/board/starfive/milk-v_mars.rst | 18 +---
doc/board/starfive/pine64_star64.rst | 26 +-----
doc/board/starfive/visionfive2.rst | 48 ++--------
30 files changed, 292 insertions(+), 149 deletions(-)
create mode 100644 arch/riscv/dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi
create mode 100644 arch/riscv/dts/k1-pinctrl.dtsi
create mode 100644 arch/riscv/lib/board.c
create mode 100644 doc/board/starfive/deepcomputing_fml13v01.rst
create mode 100644 doc/board/starfive/jh7110_common.rst
Best regards,
Leo
next reply other threads:[~2025-04-25 10:08 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-25 10:07 Leo Liang [this message]
2025-04-25 10:35 ` [GIT PULL] u-boot-riscv/master Yao Zi
2025-04-26 14:14 ` Tom Rini
2025-04-26 17:26 ` [PATCH] riscv: dts: binman.dtsi: Drop filename property for proper U-Boot Yao Zi
2025-05-08 6:52 ` Leo Liang
2025-04-25 12:57 ` [GIT PULL] u-boot-riscv/master E Shattow
2025-04-25 13:02 ` E Shattow
2025-04-25 23:43 ` Tom Rini
2025-04-26 1:13 ` E Shattow
2025-04-26 14:14 ` Tom Rini
2025-04-27 7:47 ` E Shattow
-- strict thread matches above, loose matches on Subject: below --
2025-10-16 12:07 [GIT,PULL] u-boot-riscv/master Leo Liang
2025-10-16 17:38 ` Tom Rini
2025-08-12 8:04 [GIT PULL] u-boot-riscv/master Leo Liang
2025-08-12 15:22 ` Tom Rini
2025-08-13 6:57 ` Leo Liang
2025-08-13 11:16 ` Martin Herren
2025-08-13 11:59 ` Leo Liang
2025-05-21 9:50 Leo Liang
2025-05-21 18:39 ` Tom Rini
2025-05-22 11:28 ` Conor Dooley
2025-05-22 14:45 ` Tom Rini
2025-05-22 15:36 ` Leo Liang
2025-05-22 15:54 ` Tom Rini
2025-05-22 16:40 ` Yao Zi
2025-05-23 9:18 ` Conor Dooley
2025-05-26 3:32 ` Mayuresh Chitale
2025-05-26 9:17 ` Conor Dooley
2025-05-26 14:56 ` Tom Rini
2025-05-26 17:34 ` Mayuresh Chitale
2025-05-26 18:16 ` Tom Rini
2025-05-27 17:10 ` Mayuresh Chitale
2025-05-27 17:34 ` Tom Rini
2025-03-25 6:19 Leo Liang
2025-03-25 20:18 ` Tom Rini
2025-03-06 12:18 Leo Liang
2025-03-07 11:20 ` Yao Zi
2025-02-20 5:13 Leo Liang
2025-02-20 17:19 ` Tom Rini
2025-02-03 8:17 Leo Liang
2025-02-03 21:26 ` Tom Rini
2025-01-17 1:53 Leo Liang
2025-01-17 17:56 ` Tom Rini
2024-11-27 13:08 Leo Liang
2024-11-27 18:54 ` Tom Rini
2024-11-06 12:12 Leo Liang
2024-11-08 16:51 ` Tom Rini
2024-11-11 13:24 ` Tom Rini
2024-10-29 12:33 Leo Liang
2024-10-29 16:37 ` Tom Rini
2024-10-28 12:24 Leo Liang
2024-10-28 19:33 ` Tom Rini
2024-07-22 8:29 Leo Liang
2024-07-22 19:31 ` Tom Rini
2024-05-30 8:56 Leo Liang
2024-06-03 17:42 ` Tom Rini
2024-05-14 13:28 Leo Liang
2024-05-14 16:14 ` Tom Rini
2024-05-01 16:38 Leo Liang
2024-05-02 14:42 ` Tom Rini
2024-04-09 8:25 Leo Liang
2024-04-10 0:43 ` Tom Rini
2024-03-26 13:22 Leo Liang
2024-03-27 12:12 ` Tom Rini
2024-03-12 8:51 Leo Liang
2024-03-12 18:52 ` Tom Rini
2024-01-31 10:21 Leo Liang
2024-01-31 14:14 ` Tom Rini
2023-12-14 2:38 Leo Yu-Chi Liang(梁育齊)
2023-12-14 12:19 ` Tom Rini
2023-12-14 12:46 ` Leo Liang
2023-12-14 14:39 ` Tom Rini
2023-12-07 13:46 Leo Liang
2023-12-09 20:59 ` Tom Rini
2023-11-02 10:49 Leo Liang
2023-11-02 14:53 ` Tom Rini
2021-02-26 1:53 Leo Liang
2021-02-26 17:40 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aAte-nS8ZhO_Odw1@swlinux02 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox