Re: [PATCH next] board: amediatech: Add X96Q support

["J. Neuschäfer" <j.ne@posteo.net>]

On Sun, Jan 04, 2026 at 01:34:28AM +0800, Kuan-Wei Chiu wrote:
> Hi J.,
> 
> On Wed, Dec 31, 2025 at 08:45:03PM +0100, J. Neuschäfer via B4 Relay wrote:
> > From: "J. Neuschäfer" <j.ne@posteo.net>
> > 
> > The X96Q is a set-top box with an H313 SoC, AXP305 PMIC, 1 or 2 GiB RAM,
> > 8 or 16 GiB eMMC flash, 2x USB A, Micro-SD, HDMI, Ethernet, audio/video
> > output, and infrared input.
> > 
> >   https://x96mini.com/products/x96q-tv-box-android-10-set-top-box
> > 
> > This commit adds a defconfig and some documentation. The devicetree is
> > already in dts/upstream.
> > 
> > The CONFIG_DRAM_SUNXI_* settings are chosen such that the register
> > values in the DRAM PHY's MMIO space are as close as possible to those
> > observed when booting with the preinstalled vendor U-Boot.
> > 
> > ---
> 
> Please remove the --- separator above the Signed-off-by tag. git am
> treats everything after the first --- as comments, which will cause
> your sign-off to be stripped from the final commit message.

Yes - I forgot to add the S-o-b manually, and b4 added it under the line
automatically. I will stick to the proper format in v2.

Thanks