public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Peng Fan <peng.fan@oss.nxp.com>
To: alice.guo@oss.nxp.com
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>,
	u-boot@lists.denx.de, "Christoph Stoidner" <c.stoidner@phytec.de>,
	upstream@lists.phytec.de, "Joseph Guo" <qijian.guo@nxp.com>,
	"Stefano Babic" <sbabic@nabladev.com>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Tom Rini" <trini@konsulko.com>, "Peng Fan" <peng.fan@nxp.com>,
	"Ye Li" <ye.li@nxp.com>,
	"Ranjani Vaidyanathan" <ranjani.vaidyanathan@nxp.com>,
	"Ji Luo" <ji.luo@nxp.com>, "Marek Vasut" <marex@nabladev.com>,
	"Jacky Bai" <ping.bai@nxp.com>,
	"Stefan Roese" <stefan.roese@mailbox.org>,
	"Marek Vasut" <marek.vasut+renesas@mailbox.org>,
	"David Zang" <davidzangcs@gmail.com>,
	"Simon Glass" <sjg@chromium.org>,
	"João Paulo Gonçalves" <joao.goncalves@toradex.com>,
	"Rasmus Villemoes" <ravi@prevas.dk>,
	"Primoz Fiser" <primoz.fiser@norik.com>,
	"Frieder Schrempf" <frieder.schrempf@kontron.de>,
	"Jérémie Dautheribes (Schneider Electric)"
	<jeremie.dautheribes@bootlin.com>,
	"Mathieu Othacehe" <m.othacehe@gmail.com>,
	"Francesco Dolcini" <francesco.dolcini@toradex.com>,
	"Jindong Yue" <jindong.yue@nxp.com>,
	"Frank Li" <Frank.Li@nxp.com>,
	"Max Krummenacher" <max.krummenacher@toradex.com>,
	"Ernest Van Hoecke" <ernest.vanhoecke@toradex.com>,
	"Emanuele Ghidoli" <emanuele.ghidoli@toradex.com>,
	"Alice Guo" <alice.guo@nxp.com>
Subject: Re: [PATCH v1 03/10] imx: soc: Get watchdog base addresses from device tree
Date: Thu, 12 Mar 2026 17:01:55 +0800	[thread overview]
Message-ID: <abKBA7LTRIWqUIL7@shlinux89> (raw)
In-Reply-To: <20260310-wdog-v1-3-2ee21e890634@nxp.com>

On Tue, Mar 10, 2026 at 03:53:37PM +0800, alice.guo@oss.nxp.com wrote:
>From: Alice Guo <alice.guo@nxp.com>
>
>Replace hardcoded watchdog base addresses with dynamic address lookup
>from device tree.
>
>Signed-off-by: Alice Guo <alice.guo@nxp.com>
>---
> arch/arm/mach-imx/imx8ulp/soc.c   | 15 ++++++++++++++-
> arch/arm/mach-imx/imx9/scmi/soc.c | 16 ++++++++++++++--
> arch/arm/mach-imx/imx9/soc.c      | 17 ++++++++++++++---
> arch/arm/mach-imx/mx7ulp/soc.c    | 16 ++++++++++++++--
> 4 files changed, 56 insertions(+), 8 deletions(-)
>
>diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c
>index 1ee483065e8..081ba9d60b6 100644
>--- a/arch/arm/mach-imx/imx8ulp/soc.c
>+++ b/arch/arm/mach-imx/imx8ulp/soc.c
>@@ -341,9 +341,22 @@ static void disable_wdog(void __iomem *wdog_base)
> 		;
> }
> 
>+static char *wdog_list[] = {"wdog3"};
>+
> void init_wdog(void)
> {
>-	disable_wdog((void __iomem *)WDG3_RBASE);
>+	fdt_addr_t addr;
>+	int i;
>+
>+	for (i = 0; i < ARRAY_SIZE(wdog_list); i++) {
>+		addr = imx_wdog_alias_to_addr(wdog_list[i], false);
>+		if (addr == FDT_ADDR_T_NONE) {
>+			debug("watchdog alias %s not found\n", wdog_list[i]);
>+			continue;
>+		}
>+
>+		disable_wdog((void __iomem *)addr);
>+	}
> }
> 
> static struct mm_region imx8ulp_arm64_mem_map[] = {
>diff --git a/arch/arm/mach-imx/imx9/scmi/soc.c b/arch/arm/mach-imx/imx9/scmi/soc.c
>index c1458ccca3c..692c6743418 100644
>--- a/arch/arm/mach-imx/imx9/scmi/soc.c
>+++ b/arch/arm/mach-imx/imx9/scmi/soc.c
>@@ -734,11 +734,23 @@ static void gpio_reset(ulong gpio_base)
> 	writel(0, gpio_base + 0x1c);
> }
> 
>+static char *wdog_list[] = {"wdog3", "wdog4"};
>+
> int arch_cpu_init(void)
> {
> 	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
>-		disable_wdog((void __iomem *)WDG3_BASE_ADDR);
>-		disable_wdog((void __iomem *)WDG4_BASE_ADDR);
>+		fdt_addr_t addr;
>+		int i;
>+
>+		for (i = 0; i < ARRAY_SIZE(wdog_list); i++) {
>+			addr = imx_wdog_alias_to_addr(wdog_list[i], false);
>+			if (addr == FDT_ADDR_T_NONE) {
>+				debug("watchdog alias %s not found\n", wdog_list[i]);
>+				continue;
>+			}
>+
>+			disable_wdog((void __iomem *)addr);
>+		}
> 
> 		gpio_reset(GPIO2_BASE_ADDR);
> 		gpio_reset(GPIO3_BASE_ADDR);
>diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
>index 583c3a5a464..031226ec97f 100644
>--- a/arch/arm/mach-imx/imx9/soc.c
>+++ b/arch/arm/mach-imx/imx9/soc.c
>@@ -279,11 +279,22 @@ static void disable_wdog(void __iomem *wdog_base)
> 		;
> }
> 
>+static char *wdog_list[] = {"wdog3", "wdog4", "wdog5"};
>+
> void init_wdog(void)
> {
>-	disable_wdog((void __iomem *)WDG3_BASE_ADDR);
>-	disable_wdog((void __iomem *)WDG4_BASE_ADDR);
>-	disable_wdog((void __iomem *)WDG5_BASE_ADDR);
>+	fdt_addr_t addr;
>+	int i;
>+
>+	for (i = 0; i < ARRAY_SIZE(wdog_list); i++) {
>+		addr = imx_wdog_alias_to_addr(wdog_list[i], false);
>+		if (addr == FDT_ADDR_T_NONE) {
>+			debug("watchdog alias %s not found\n", wdog_list[i]);
>+			continue;
>+		}
>+
>+		disable_wdog((void __iomem *)addr);
>+	}
> }
> 
> static struct mm_region imx93_mem_map[] = {
>diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c
>index 5306e76223f..27ba8a37162 100644
>--- a/arch/arm/mach-imx/mx7ulp/soc.c
>+++ b/arch/arm/mach-imx/mx7ulp/soc.c
>@@ -146,6 +146,8 @@ static void disable_wdog(u32 wdog_base)
> 	while (!(readl(wdog_base + 0x00) & 0x400));
> }
> 
>+static char *wdog_list[] = {"wdog1", "wdog2"};
>+
> void init_wdog(void)
> {
> 	/*
>@@ -161,8 +163,18 @@ void init_wdog(void)
> 	 * In this function, we will disable both WDOG1 and WDOG2,
> 	 * and set update bit for both. So that kernel can reconfigure them.
> 	 */
>-	disable_wdog(WDG1_RBASE);
>-	disable_wdog(WDG2_RBASE);
>+	fdt_addr_t addr;
>+	int i;
>+
>+	for (i = 0; i < ARRAY_SIZE(wdog_list); i++) {
>+		addr = imx_wdog_alias_to_addr(wdog_list[i], false);
>+		if (addr == FDT_ADDR_T_NONE) {
>+			debug("watchdog alias %s not found\n", wdog_list[i]);
>+			continue;
>+		}
>+
>+		disable_wdog((u32)addr);
>+	}

It should be better to use
fdt_for_each_comaptible_node or ofnode_for_each_compatible_node


Regards
Peng

> }
> 
> static bool ldo_mode_is_enabled(void)
>
>-- 
>2.43.0
>

  reply	other threads:[~2026-03-12 12:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-10  7:53 [PATCH 00/10] imx: Switch watchdog addressing from macros to devicetree alice.guo
2026-03-10  7:53 ` [PATCH v1 01/10] imx: Add helper to get watchdog base address from DT alias alice.guo
2026-03-12  7:17   ` Peng Fan
2026-03-12  9:52     ` Rasmus Villemoes
2026-03-10  7:53 ` [PATCH v1 02/10] watchdog: ulp_wdog: Get watchdog base address from device tree alice.guo
2026-03-12  7:19   ` Peng Fan
2026-03-10  7:53 ` [PATCH v1 03/10] imx: soc: Get watchdog base addresses " alice.guo
2026-03-12  9:01   ` Peng Fan [this message]
2026-03-10  7:53 ` [PATCH v1 04/10] imx7ulp: dtsi: Add wdog1 and wdog2 nodes with aliases alice.guo
2026-03-10  7:53 ` [PATCH v1 05/10] imx8ulp: dtsi: Add wdog3 alias and bootph-all property alice.guo
2026-03-10  7:53 ` [PATCH v1 06/10] imx93: dtsi: Add wdog3/wdog4/wdog5 " alice.guo
2026-03-10  7:53 ` [PATCH v1 07/10] imx91: " alice.guo
2026-03-10  7:53 ` [PATCH v1 08/10] imx943: dtsi: Add wdog3 and wdog4 nodes with aliases alice.guo
2026-03-10  7:53 ` [PATCH v1 09/10] imx95: " alice.guo
2026-03-10  7:53 ` [PATCH v1 10/10] imx: Remove hardcoded watchdog base address macros alice.guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=abKBA7LTRIWqUIL7@shlinux89 \
    --to=peng.fan@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=alice.guo@nxp.com \
    --cc=alice.guo@oss.nxp.com \
    --cc=c.stoidner@phytec.de \
    --cc=davidzangcs@gmail.com \
    --cc=emanuele.ghidoli@toradex.com \
    --cc=ernest.vanhoecke@toradex.com \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=jeremie.dautheribes@bootlin.com \
    --cc=ji.luo@nxp.com \
    --cc=jindong.yue@nxp.com \
    --cc=joao.goncalves@toradex.com \
    --cc=m.othacehe@gmail.com \
    --cc=marek.vasut+renesas@mailbox.org \
    --cc=marex@nabladev.com \
    --cc=max.krummenacher@toradex.com \
    --cc=peng.fan@nxp.com \
    --cc=ping.bai@nxp.com \
    --cc=primoz.fiser@norik.com \
    --cc=qijian.guo@nxp.com \
    --cc=ranjani.vaidyanathan@nxp.com \
    --cc=ravi@prevas.dk \
    --cc=sbabic@nabladev.com \
    --cc=sjg@chromium.org \
    --cc=stefan.roese@mailbox.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-imx@nxp.com \
    --cc=upstream@lists.phytec.de \
    --cc=ye.li@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox