From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 29 Mar 2021 03:32:51 +0200 Subject: [PATCH V2] spi: Update speed/mode on change In-Reply-To: <20210328213055.GB1310@bill-the-cat> References: <20210226142124.56305-1-marex@denx.de> <20210328213055.GB1310@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 3/28/21 11:30 PM, Tom Rini wrote: > On Fri, Feb 26, 2021 at 03:21:24PM +0100, Marek Vasut wrote: > >> The spi_get_bus_and_cs() may be called on the same bus and chipselect >> with different frequency or mode. This is valid usecase, but the code >> fails to notify the controller of such a configuration change. Call >> spi_set_speed_mode() in case bus frequency or bus mode changed to let >> the controller update the configuration. >> >> The problem can easily be triggered using the sspi command: >> => sspi 0:0 at 1000 >> => sspi 0:0 at 2000 >> Without this patch, both transfers happen at 1000 Hz. With this patch, >> the later transfer happens correctly at 2000 Hz. >> >> Signed-off-by: Marek Vasut >> Cc: Jagan Teki >> Cc: Patrick Delaunay > > So, very reliably I can make: > https://source.denx.de/u-boot/u-boot/-/jobs/245517 > happen locally as well building with clang. It's not obvious to me why > the test now fails however. Can you please be more specific / clear ? I have no idea what those 300 lines of cryptic output mean, nor what are you trying to say by the above, sorry.