From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] mips: mt76xx: linkit-smart-7688: Enable USB and FS support
Date: Wed, 10 Apr 2019 21:36:29 +0200 [thread overview]
Message-ID: <adb80eaf-b5fe-cede-b2ea-bbd799b94222@gmail.com> (raw)
In-Reply-To: <20190405114444.8558-2-sr@denx.de>
Am 05.04.19 um 13:44 schrieb Stefan Roese:
> This patch enables USB and file-system support on the LinkIt smart
> MT7688 module for both, the normal and the RAM default config.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> ---
> configs/linkit-smart-7688-ram_defconfig | 14 +++++++++++++-
> configs/linkit-smart-7688_defconfig | 14 +++++++++++++-
> 2 files changed, 26 insertions(+), 2 deletions(-)
there are now conflicts with current master branch. Could you check and
resend?
>
> diff --git a/configs/linkit-smart-7688-ram_defconfig b/configs/linkit-smart-7688-ram_defconfig
> index 2d3ab7e35c..4cb1d7a603 100644
> --- a/configs/linkit-smart-7688-ram_defconfig
> +++ b/configs/linkit-smart-7688-ram_defconfig
> @@ -20,17 +20,21 @@ CONFIG_CMD_MEMINFO=y
> # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_PART=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_TIME=y
> +CONFIG_CMD_FS_GENERIC=y
> +# CONFIG_DOS_PARTITION is not set
> CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_NET_RANDOM_ETHADDR=y
> # CONFIG_DM_DEVICE_REMOVE is not set
> -CONFIG_HAVE_BLOCK_DEVICE=y
> +CONFIG_BLK=y
> CONFIG_CLK=y
> CONFIG_LED=y
> CONFIG_LED_BLINK=y
> @@ -46,6 +50,7 @@ CONFIG_PHYLIB=y
> CONFIG_PHY_FIXED=y
> CONFIG_MT7628_ETH=y
> CONFIG_PHY=y
> +CONFIG_MT76X8_USB_PHY=y
> CONFIG_POWER_DOMAIN=y
> CONFIG_RAM=y
> CONFIG_DM_RESET=y
> @@ -54,5 +59,12 @@ CONFIG_SYS_NS16550=y
> CONFIG_SPI=y
> CONFIG_MT7621_SPI=y
> CONFIG_SYSRESET_SYSCON=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_FS_EXT4=y
> +CONFIG_FS_FAT=y
> CONFIG_LZMA=y
> CONFIG_LZO=y
> diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
> index ad34aaf640..dd157795bd 100644
> --- a/configs/linkit-smart-7688_defconfig
> +++ b/configs/linkit-smart-7688_defconfig
> @@ -24,17 +24,21 @@ CONFIG_CMD_MEMINFO=y
> # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_GPIO=y
> # CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_PART=y
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> CONFIG_CMD_DHCP=y
> CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_TIME=y
> +CONFIG_CMD_FS_GENERIC=y
> +# CONFIG_DOS_PARTITION is not set
> CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_NET_RANDOM_ETHADDR=y
> # CONFIG_DM_DEVICE_REMOVE is not set
> -CONFIG_HAVE_BLOCK_DEVICE=y
> +CONFIG_BLK=y
> CONFIG_CLK=y
> CONFIG_LED=y
> CONFIG_LED_BLINK=y
> @@ -50,6 +54,7 @@ CONFIG_PHYLIB=y
> CONFIG_PHY_FIXED=y
> CONFIG_MT7628_ETH=y
> CONFIG_PHY=y
> +CONFIG_MT76X8_USB_PHY=y
> CONFIG_POWER_DOMAIN=y
> CONFIG_RAM=y
> CONFIG_DM_RESET=y
> @@ -58,5 +63,12 @@ CONFIG_SYS_NS16550=y
> CONFIG_SPI=y
> CONFIG_MT7621_SPI=y
> CONFIG_SYSRESET_SYSCON=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_FS_EXT4=y
> +CONFIG_FS_FAT=y
> CONFIG_LZMA=y
> CONFIG_LZO=y
>
--
- Daniel
next prev parent reply other threads:[~2019-04-10 19:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-05 11:44 [U-Boot] [PATCH 1/2] phy: Add USB PHY driver for the MT76x8 (7628/7688) SoC Stefan Roese
2019-04-05 11:44 ` [U-Boot] [PATCH 2/2] mips: mt76xx: linkit-smart-7688: Enable USB and FS support Stefan Roese
2019-04-10 19:36 ` Daniel Schwierzeck [this message]
2019-04-11 5:03 ` Stefan Roese
2019-04-11 7:48 ` Daniel Schwierzeck
2019-04-11 8:38 ` Stefan Roese
2019-04-07 18:03 ` [U-Boot] [PATCH 1/2] phy: Add USB PHY driver for the MT76x8 (7628/7688) SoC Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=adb80eaf-b5fe-cede-b2ea-bbd799b94222@gmail.com \
--to=daniel.schwierzeck@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox