Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support

["Marko Mäkelä" <marko.makela@iki.fi>]

Sun, Apr 19, 2026 at 10:08:56AM -0500, Robert Nelson wrote:
>On Sun, Apr 19, 2026 at 8:54 AM Marko Mäkelä <marko.makela@iki.fi> wrote:
>>
>> Hi Robert,
>>
>> Sat, Apr 18, 2026 at 12:53:59PM -0500, Robert Nelson wrote:
>> >Please don't upgrade to the 12.x.y.z0 branch of ti-linux-firmware
>> >
>> >After this commit you can't even upgrade to `v11.02.09` without other changes!
>> >
>> >https://github.com/u-boot/u-boot/commit/7403d26bea36315f2008ed3ef80125b094c0bafb
>>
>> I downgraded to firmware 11.2.5 "Fancy Rat", but that didn't allow me to
>> see any further messages.
>>
>> >I'm pretty sure OpTee 4.10.0 is safe, but otherwise this is my current
>> >stable branch:
>> >
>> >https://github.com/beagleboard/u-boot-pocketbeagle2/blob/main/version.sh
>>
>> I tried to choose the same versions: OPTEE 4.9.0, TI-firmware 11.02.11
>> (strangely, also this one identifies as 11.2.5; I should always build
>> everything from the scratch), and TrustedFirmware-A v2.14.0 a.k.a.
>> lts-v2.14.0, because I did not find any tag for v2.14.1. The U-boot fork
>> that I'm trying to build is already the same one. The boot process would
>> seem to always hang at the same spot: before switching to the 64-bit
>> u-boot.
>
>it's showing up in this repo
>
>https://github.com/TrustedFirmware-A/trusted-firmware-a/tags

Thank you. Somehow I was missing the tag:

Fetching origin
 From https://git.trustedfirmware.org/TF-A/trusted-firmware-a
  * [new tag]             lts-v2.14.1 -> lts-v2.14.1

Replacing the TF-A didn't make a difference either. I guess I will 
switch to another (non-trusted-firmware) development platform until a 
revised update is available.

	Marko