U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Kuan-Wei Chiu <visitorckw@gmail.com>
To: Angelo Dureghello <angelo@kernel-space.org>
Cc: trini@konsulko.com, u-boot@lists.denx.de, sjg@chromium.org
Subject: Re: [PATCH 5/9] configs: stmark2: add support for mmc
Date: Sun, 26 Apr 2026 01:02:20 +0800	[thread overview]
Message-ID: <aezznOpfVei-LZF8@google.com> (raw)
In-Reply-To: <20260416121431.20852-5-angelo@kernel-space.org>

Hi Angelo,

On Thu, Apr 16, 2026 at 02:14:27PM +0200, Angelo Dureghello wrote:
> Add support for mmc.
> 
> Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>

it looks like the changes to stmark2_defconfig were edited manually.
Could you please use make savedefconfig to generate this file?

Regards,
Kuan-Wei

$ make stmark2_defconfig
$ make savedefconfig
$ diff -u configs/stmark2_defconfig defconfig
--- configs/stmark2_defconfig   2026-04-25 17:01:03.607521115 +0000
+++ defconfig   2026-04-25 17:01:11.186044050 +0000
@@ -28,18 +28,17 @@
 # CONFIG_CMD_IMPORTENV is not set
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
 CONFIG_CMD_SPI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)"
-CONFIG_CMD_MMC=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_DOS_PARTITION=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_SPI_CS=1
 CONFIG_ENV_RELOC_GD_ENV_ADDR=y
@@ -48,9 +47,8 @@
 CONFIG_NO_NET=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_FSL=y
-CONFIG_MTD=y
 CONFIG_MMC=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MTD=y

> ---
>  configs/stmark2_defconfig | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig
> index ae1fa34df2a..763cbac158d 100644
> --- a/configs/stmark2_defconfig
> +++ b/configs/stmark2_defconfig
> @@ -3,19 +3,19 @@ CONFIG_TEXT_BASE=0x47E00000
>  CONFIG_SYS_MALLOC_LEN=0x40000
>  CONFIG_SF_DEFAULT_SPEED=50000000
>  CONFIG_ENV_SIZE=0x2000
> -CONFIG_ENV_OFFSET=0x40000
> +CONFIG_ENV_OFFSET=0x80000
>  CONFIG_ENV_SECT_SIZE=0x10000
>  CONFIG_DEFAULT_DEVICE_TREE="stmark2"
> -CONFIG_SYS_MONITOR_LEN=262144
> -CONFIG_SYS_LOAD_ADDR=0x40010000
> +CONFIG_SYS_MONITOR_LEN=327680
> +CONFIG_SYS_LOAD_ADDR=0x42000000
>  CONFIG_TARGET_STMARK2=y
>  CONFIG_SYS_BARGSIZE=256
>  CONFIG_SYS_MONITOR_BASE=0x47E00400
>  CONFIG_TIMESTAMP=y
>  CONFIG_USE_BOOTARGS=y
> -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1"
> +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/sbin/init devtmpfs.mount=1"
>  CONFIG_USE_BOOTCOMMAND=y
> -CONFIG_BOOTCOMMAND="sf probe 0:1 50000000; sf read ${loadaddr} 0x100000 ${kern_size}; bootm ${loadaddr}"
> +CONFIG_BOOTCOMMAND="run boot_sd; bootm ${loadaddr} ${loadaddr_ramfs}"
>  CONFIG_SYS_PBSIZE=283
>  # CONFIG_DISPLAY_BOARDINFO is not set
>  CONFIG_SYS_MALLOC_BOOTPARAMS=y
> @@ -34,6 +34,12 @@ CONFIG_CMD_CACHE=y
>  CONFIG_CMD_MTDPARTS=y
>  CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
>  CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)"
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_DOS_PARTITION=y
>  CONFIG_ENV_IS_IN_SPI_FLASH=y
>  CONFIG_ENV_SPI_CS=1
>  CONFIG_ENV_RELOC_GD_ENV_ADDR=y
> @@ -43,6 +49,8 @@ CONFIG_NO_NET=y
>  CONFIG_DM_I2C=y
>  CONFIG_SYS_I2C_FSL=y
>  CONFIG_MTD=y
> +CONFIG_MMC=y
> +CONFIG_FSL_ESDHC_IMX=y
>  CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH_ISSI=y
>  CONFIG_SPI_FLASH_MTD=y
> -- 
> 2.53.0
> 

  reply	other threads:[~2026-04-25 17:02 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-16 12:14 [PATCH 1/9] m68k: dts: mcf5441x: add mmc device for mcf5441x Angelo Dureghello
2026-04-16 12:14 ` [PATCH 2/9] m68k: dts: stmark2: enable esdhc Angelo Dureghello
2026-04-16 12:14 ` [PATCH 3/9] board: stmark2: add sd boot command Angelo Dureghello
2026-04-16 12:14 ` [PATCH 4/9] board: stmark2: remove old garbage Angelo Dureghello
2026-04-25 16:26   ` Kuan-Wei Chiu
2026-04-25 16:31     ` Kuan-Wei Chiu
2026-04-16 12:14 ` [PATCH 5/9] configs: stmark2: add support for mmc Angelo Dureghello
2026-04-25 17:02   ` Kuan-Wei Chiu [this message]
2026-04-16 12:14 ` [PATCH 6/9] configs: stmark2: add bdinfo command Angelo Dureghello
2026-04-16 12:14 ` [PATCH 7/9] mmc: Kconfig: allows m68k to use esdhc imx driver Angelo Dureghello
2026-04-16 12:14 ` [PATCH 8/9] m68k: mcf5441x: create stub to use imx drivers Angelo Dureghello
2026-04-16 12:14 ` [PATCH 9/9] m68k: set proper u-boot image size for initial boot Angelo Dureghello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aezznOpfVei-LZF8@google.com \
    --to=visitorckw@gmail.com \
    --cc=angelo@kernel-space.org \
    --cc=sjg@chromium.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox