[U-Boot] [PATCH v1 05/18] usb: dwc3: switch to peripheral mode when exiting

[Marek Vasut <marek.vasut@gmail.com>]

On 4/5/19 2:55 PM, Jean-Jacques Hiblot wrote:
> This allow the phy to enter idle and then suspend.
> the K2 platforms require the PHY to be suspended before the USB domain
> clock can be turned off.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> ---
> 
>  drivers/usb/dwc3/core.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 56e2a046bf..ae01490306 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -581,6 +581,12 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  	return 0;
>  }
>  
> +static void dwc3_gadget_run(struct dwc3 *dwc)
> +{
> +	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_RUN_STOP);
> +	mdelay(100);

That's long, is this really needed ?

> +}
> +
>  static void dwc3_core_exit_mode(struct dwc3 *dwc)
>  {
>  	switch (dwc->dr_mode) {
> @@ -598,6 +604,13 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
>  		/* do nothing */
>  		break;
>  	}
> +
> +	/*
> +	 * switch back to peripheral mode
> +	 * This enables the phy to enter idle and then, if enabled, suspend.
> +	 */
> +	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
> +	dwc3_gadget_run(dwc);
>  }
>  
>  #define DWC3_ALIGN_MASK		(16 - 1)
> 


-- 
Best regards,
Marek Vasut