* [U-Boot] what are flash settings for Spansion 4M S29AL032D flash?
@ 2015-12-23 16:07 Robert P. J. Day
0 siblings, 0 replies; only message in thread
From: Robert P. J. Day @ 2015-12-23 16:07 UTC (permalink / raw)
To: u-boot
a couple of us have been fighting with this for a couple hours ...
we have an old powerpc board on which we've hacked u-boot to get to
the prompt, now we're trying to get u-boot to recognize that flash
chip.
at u-boot time, u-boot prints both the manufacturer ID and device as
"0x0" so, clearly, it's not picking that up properly. can anyone
suggest what the proper u-boot configuration selections should be for
that particular flash?
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-12-23 16:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-23 16:07 [U-Boot] what are flash settings for Spansion 4M S29AL032D flash? Robert P. J. Day
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox