From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert P. J. Day Date: Wed, 23 Dec 2015 11:07:48 -0500 (EST) Subject: [U-Boot] what are flash settings for Spansion 4M S29AL032D flash? Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de a couple of us have been fighting with this for a couple hours ... we have an old powerpc board on which we've hacked u-boot to get to the prompt, now we're trying to get u-boot to recognize that flash chip. at u-boot time, u-boot prints both the manufacturer ID and device as "0x0" so, clearly, it's not picking that up properly. can anyone suggest what the proper u-boot configuration selections should be for that particular flash? rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================