Re: [PATCH 1/4] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU

[Marek Vasut <marek.vasut@mailbox.org>]

On 3/19/25 2:42 AM, Adam Ford wrote:
> Much of the data that is display by imx8_cpu.c is also
> displayed from arch/arm/mach-imx/cpu.c, except the
> speed grade and temperature unless the SoC is an i.MX9.
> Expand this to include checks for IMX_THERMAL or IMX_TMU
> in the same way it's done for mach-imx/cpu.c.
> 
> Before:
> CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
> Model: Beacon EmbeddedWorks i.MX8MPlus Development kit
> 
> After:
> CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
> CPU:   Industrial temperature grade  (-40C to 105C) at 28C
> Model: Beacon EmbeddedWorks i.MX8MPlus Development kit
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> 
> diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
> index 53d31b3c0bf..facd561022f 100644
> --- a/drivers/cpu/imx8_cpu.c
> +++ b/drivers/cpu/imx8_cpu.c
> @@ -177,7 +177,9 @@ static int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size)
>   	ret = snprintf(buf, size, "NXP i.MX%s Rev%s %s at %u MHz",
>   		       plat->type, plat->rev, plat->name, plat->freq_mhz);
>   
> -	if (IS_ENABLED(CONFIG_IMX9)) {
> +	if (IS_ENABLED(CONFIG_IMX9) ||
> +	    IS_ENABLED(CONFIG_IMX_THERMAL) ||
> +	    IS_ENABLED(CONFIG_IMX_TMU)) {

Can CONFIG_IMX9 instead select CONFIG_IMX_THERMAL or CONFIG_IMX_TMU , so 
the SoC specific check could be removed from here ?