From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jaehoon Chung <jh80.chung@samsung.com>
Date: Fri, 07 Oct 2016 08:48:43 +0900
Subject: [U-Boot] [bug report] sunxi: booting from eMMC
In-Reply-To: <CAC2Q4vawk9HqjpeMXVn+AQcJG7+kiXrCtFngwuS=1STO3vWX-g@mail.gmail.com>
References: <340B7010-5177-4AA7-A4A9-62EB417DD2B0@gmail.com>
 <CAD6G_RR5DTSyuDyp0Ja=+WTmwGAxqx0TGFA=6hpq8_ic49WOhQ@mail.gmail.com>
 <22F0B8C2-5055-4D82-96CA-C503F42D114F@gmail.com>
 <CAD6G_RRej9BAPVckeQSeCXEaT4TMKTUPsPvovKO3og=AKYv38g@mail.gmail.com>
 <CAC2Q4vbD0Eh++cfvKfbSxK_m0KLqUh5GGJ4ur6K6AFSp2so39w@mail.gmail.com>
 <CAC2Q4vY8vnaM5XrZKNp84J0AmYKWSGQKK_DQOKLERUCQyGM=nA@mail.gmail.com>
 <CAC2Q4vZnpFmFFMkugHRD05-sX4OUL6Rm-gAoh=8P00jqMY=iJA@mail.gmail.com>
 <CAD6G_RRbLKdstKYf=5iMxnCu351GmYoy+VWYwYwda-XAe5pQ=Q@mail.gmail.com>
 <CAC2Q4vY0mpHLO82qN=xecvy9gjKESWd_FzP-esaC9zcyH0dqcg@mail.gmail.com>
 <CGME20161002204440epcas1p31a02667fb1a1e9cc29bfbfdca8b6fefb@epcas1p3.samsung.com>
 <CAC2Q4vawk9HqjpeMXVn+AQcJG7+kiXrCtFngwuS=1STO3vWX-g@mail.gmail.com>
Message-ID: <b8a36357-ea65-b709-eecd-97e3f5511d3c@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10/03/2016 02:39 AM, AneoX wrote:
> Emmc Card was the new one, so i just burn a dump of working sd. Previously
> sd have been wired to board for test.
> 
> Board is a custom,  like olinuxino lime which with nand and sd slot, 512 mb
> ram. So i using it defconfig and in case of sd card, it works.
> Emmc lines has external pullups according to the datasheet.

Well, i needs to get more information..If you guess that seems to return 0 from block_read()..
then you can find which condition was hit..is it impossible?

If you can share more debug message..then i will help you.

Best Regards,
Jaehoon Chung

> 
> 2 ???. 2016 ?. 23:28 ???????????? "Jagan Teki" <jagannadh.teki@gmail.com>
> ???????:
> 
> On Sun, Oct 2, 2016 at 10:45 PM, AneoX <aneox.inbox@gmail.com> wrote:
>> Like a sd card. I have emmc to sd adapter, so
>>
>> dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
> 
> I guess you cleaned[1] the card before doing this?
> 
>>
>> and then just solder emmc to my board.
> 
> OK, which a20 board?
> 
> [1] http://linux-sunxi.org/Bootable_SD_card
> 
> thanks!
> --
> Jagan Teki
> Free Software Engineer | www.openedev.com
> U-Boot, Linux | Upstream Maintainer
> Hyderabad, India.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>