From: Patrice CHOTARD <patrice.chotard@st.com>
To: u-boot@lists.denx.de
Subject: [PATCH 03/16] arm: stm32mp: reset to default environment when serial# change
Date: Wed, 1 Apr 2020 07:22:24 +0000 [thread overview]
Message-ID: <bf7a1bac-1f58-7928-e807-dbcfccd78198@st.com> (raw)
In-Reply-To: <20200331180330.3.I8f6df6d28ce5b4b601ced711af3699d95e1576fb@changeid>
Hi Patrick???
On 3/31/20 6:04 PM, Patrick Delaunay wrote:
> Serial number is first checked and, in case of mismatch, all
> environment variables are reset to their default value.
>
> This patch allows to detect that environment is saved in a removable
> device, as a SD card, and reused on a other board, potentially with
> incompatible variables.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> ---
>
> arch/arm/mach-stm32mp/cpu.c | 20 +++++++++++++++-----
> 1 file changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
> index 9aa5794334..365c2aa4f7 100644
> --- a/arch/arm/mach-stm32mp/cpu.c
> +++ b/arch/arm/mach-stm32mp/cpu.c
> @@ -511,8 +511,9 @@ __weak int setup_mac_address(void)
> return -EINVAL;
> }
> pr_debug("OTP MAC address = %pM\n", enetaddr);
> - ret = !eth_env_set_enetaddr("ethaddr", enetaddr);
> - if (!ret)
> +
> + ret = eth_env_set_enetaddr("ethaddr", enetaddr);
> + if (ret)
> pr_err("Failed to set mac address %pM from OTP: %d\n",
> enetaddr, ret);
> #endif
> @@ -522,13 +523,13 @@ __weak int setup_mac_address(void)
>
> static int setup_serial_number(void)
> {
> + char *serial_env;
> char serial_string[25];
> u32 otp[3] = {0, 0, 0 };
> struct udevice *dev;
> int ret;
>
> - if (env_get("serial#"))
> - return 0;
> + serial_env = env_get("serial#");
>
> ret = uclass_get_device_by_driver(UCLASS_MISC,
> DM_GET_DRIVER(stm32mp_bsec),
> @@ -542,6 +543,15 @@ static int setup_serial_number(void)
> return ret;
>
> sprintf(serial_string, "%08X%08X%08X", otp[0], otp[1], otp[2]);
> +
> + if (serial_env) {
> + if (!strcmp(serial_string, serial_env))
> + return 0;
> + /* For invalid enviromnent (serial# change), reset to default */
> + env_set_default("serial number mismatch", 0);
> + }
> +
> + /* save serial number */
> env_set("serial#", serial_string);
>
> return 0;
> @@ -549,9 +559,9 @@ static int setup_serial_number(void)
>
> int arch_misc_init(void)
> {
> + setup_serial_number();
> setup_boot_mode();
> setup_mac_address();
> - setup_serial_number();
>
> return 0;
> }
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Thanks
next prev parent reply other threads:[~2020-04-01 7:22 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 16:04 [PATCH 01/16] arm: stm32mp: update dependency for STM32_ETZPC Patrick Delaunay
2020-03-31 16:04 ` [PATCH 02/16] arm: stm32mp: remove dependency for STM32KEY Patrick Delaunay
2020-04-01 7:19 ` Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 03/16] arm: stm32mp: reset to default environment when serial# change Patrick Delaunay
2020-04-01 7:22 ` Patrice CHOTARD [this message]
2020-04-01 11:18 ` Wolfgang Denk
2020-04-07 14:31 ` Patrick DELAUNAY
2020-04-07 16:22 ` Wolfgang Denk
2020-03-31 16:04 ` [PATCH 04/16] arm: stm32mp: detect U-Boot version used to save environment Patrick Delaunay
2020-04-01 7:33 ` Patrice CHOTARD
2020-04-07 14:37 ` Patrick DELAUNAY
2020-04-01 11:26 ` Wolfgang Denk
2020-04-07 14:54 ` Patrick DELAUNAY
2020-04-07 16:28 ` Wolfgang Denk
2020-04-08 9:38 ` [Uboot-stm32] " Patrick DELAUNAY
2020-03-31 16:04 ` [PATCH 05/16] arm: stm32mp: spl: add bsec driver in SPL Patrick Delaunay
2020-04-01 7:34 ` Patrice CHOTARD
2020-04-01 11:27 ` Wolfgang Denk
2020-04-08 14:31 ` Patrick DELAUNAY
2020-03-31 16:04 ` [PATCH 06/16] arm: stm32mp: spl: display error in board_init_f Patrick Delaunay
2020-04-01 7:43 ` Patrice CHOTARD
2020-04-01 11:30 ` Wolfgang Denk
2020-04-21 16:05 ` Patrick DELAUNAY
2020-04-23 20:39 ` Wolfgang Denk
2020-04-24 8:28 ` Patrick DELAUNAY
2020-03-31 16:04 ` [PATCH 07/16] board: stm32mp1: Keep error led ON in case of low power detection Patrick Delaunay
2020-04-01 7:44 ` Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 08/16] board: stm32mp1: update management of boot-led Patrick Delaunay
2020-04-01 7:49 ` [Uboot-stm32] " Patrice CHOTARD
2020-04-01 11:32 ` Wolfgang Denk
2020-04-01 11:43 ` Anatolij Gustschin
2020-04-10 17:08 ` Patrick DELAUNAY
2020-03-31 16:04 ` [PATCH 09/16] board: stm32mp1: gt9147 IRQ before reset on EV1 Patrick Delaunay
2020-04-01 7:53 ` [Uboot-stm32] " Patrice CHOTARD
2020-04-01 11:34 ` Wolfgang Denk
2020-03-31 16:04 ` [PATCH 10/16] board: stm32mp1: set environment variable fdtfile Patrick Delaunay
2020-04-01 8:06 ` [Uboot-stm32] " Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 11/16] board: stm32mp1: check env_get result in board_late_init Patrick Delaunay
2020-04-01 8:06 ` [Uboot-stm32] " Patrice CHOTARD
2020-04-01 11:39 ` Wolfgang Denk
2020-03-31 16:04 ` [PATCH 12/16] board: stm32mp1: add timeout for I/O compensation ready Patrick Delaunay
2020-04-01 8:07 ` [Uboot-stm32] " Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 13/16] gpio: stm32: support gpio ops in SPL Patrick Delaunay
2020-04-01 8:11 ` Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 14/16] ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX Patrick Delaunay
2020-04-01 8:08 ` [Uboot-stm32] " Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 15/16] configs: stm32mp1: activate Ethernet PHY Realtek Patrick Delaunay
2020-04-01 8:08 ` [Uboot-stm32] " Patrice CHOTARD
2020-03-31 16:04 ` [PATCH 16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR Patrick Delaunay
2020-04-01 8:09 ` [Uboot-stm32] " Patrice CHOTARD
2020-04-01 7:10 ` [PATCH 01/16] arm: stm32mp: update dependency for STM32_ETZPC Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bf7a1bac-1f58-7928-e807-dbcfccd78198@st.com \
--to=patrice.chotard@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox