From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Mon, 18 Mar 2019 09:59:09 +0100 Subject: [U-Boot] mpc85xx, mpc86xx: device tree model In-Reply-To: <20190317031608.GJ8732@bill-the-cat> References: <20190315160621.GA8732@bill-the-cat> <20190317031608.GJ8732@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Tom, rabhakar, Am 17.03.2019 um 04:16 schrieb Tom Rini: > On Sun, Mar 17, 2019 at 03:01:32AM +0000, Prabhakar Kushwaha wrote: >> >>> -----Original Message----- >>> From: Tom Rini >>> Sent: Friday, March 15, 2019 9:36 PM >>> To: Prabhakar Kushwaha >>> Cc: u-boot at lists.denx.de; York Sun >>> Subject: Re: mpc85xx, mpc86xx: device tree model >>> >>> On Fri, Mar 15, 2019 at 05:05:06AM +0000, Prabhakar Kushwaha wrote: >>> >>>> Hi Tom, >>>> >>>> I am seeing following type of build warnings for MMC. >>>> >>>> +===================== WARNING ====================== This board >>> does >>>> +not use CONFIG_DM_MMC. Please update the board to use >>> CONFIG_DM_MMC >>>> +before the v2019.04 release. >>>> +Failure to update by the deadline may result in board removal. >>>> +See doc/driver-model/MIGRATION.txt for more info. >>>> >>>> Considering "number" of powerpc platform are not migrated to deice >>>> tree. They can not be migrated to CONFIG_DM_MMC withing v2019.04 >>>> time-frame (considering rc4 is on 18th march). >>>> v2019.07 looks feasible for removing all warning which includes >>>> CONFIG_DM_USB, CONFIG_DM_SCSI, CONFIG_DM_PCI, >>> CONFIG_DM_SPI_FLASH and >>>> CONFIG_DM_MMC. >>>> >>>> is there any plan of removing boards which don't have CONFIG_DM_MMC >>>> for v2019.04? >>> >>> Good question. Where exactly are we with getting more of PowerPC brought up >>> to date with these requirements? >> >> There are only 2 platforms which are on device tree model. >> >> Rest (65 targets) still need to be ported. Here 13 are non-NXP and 52 NXP. >> I am working internally to get staffed for porting of NXP platform. >> For non-NXP , I will reaching platform owners for migration. >> >> It will take some time. > > OK. I may get time to dig into mpc85xx based socrates board. Anyone tried if this board works anymore? @York: Do you work on such an adaption? May we can share efforts? bye, Heikp -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de