From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Heider Date: Tue, 19 Dec 2017 16:31:12 +0100 Subject: [U-Boot] [PATCH] sunxi: imply CONFIG_OF_LIBFDT_OVERLAY In-Reply-To: <20171219125127.mrojchxrembwjq2s@flea.lan> References: <20171213084636.13184-1-a.heider@gmail.com> <20171219125127.mrojchxrembwjq2s@flea.lan> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 19/12/17 13:51, Maxime Ripard wrote: > On Tue, Dec 19, 2017 at 05:12:00PM +0530, Jagan Teki wrote: >> On Wed, Dec 13, 2017 at 2:16 PM, Andre Heider wrote: >>> fdt overlay support is useful for all sunxi boards, enable per default >>> and remove it from sunxi defconfigs. >>> >>> Signed-off-by: Andre Heider >>> --- >>> >>> Hi, >>> >>> there're way too many sunxi boards so I'm not 100% sure this is the best >>> approach... >>> >>> Are there boards where enabling this is definitely not desired? >>> >>> Thanks, >>> Andre >>> >>> arch/arm/Kconfig | 1 + >>> configs/CHIP_defconfig | 1 - >>> configs/CHIP_pro_defconfig | 1 - >>> 3 files changed, 1 insertion(+), 2 deletions(-) >>> >>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >>> index 73909952d0..25847b3aa1 100644 >>> --- a/arch/arm/Kconfig >>> +++ b/arch/arm/Kconfig >>> @@ -715,6 +715,7 @@ config ARCH_SUNXI >>> select USE_TINY_PRINTF >>> imply CMD_GPT >>> imply FAT_WRITE >>> + imply OF_LIBFDT_OVERLAY >> >> It's increasing u-boot.itb size to 512KB (which is 508K earlier) and >> in either case the size moves on env side where env start 0x88000 >> (504KB) > > Right, so maybe we can make that conditional to ARM? > > Maxime > From the 'we're out of space' thread: ... > So, with FIT_ENABLE_SHA256_SUPPORT, LZMADEC, ISO_PARTITION and the > overlay support, we're at 500kB. > > Again, tight, but under the limit. ... If I understood correctly the issue will be solved without any requiring changes to this patch. Let me know if that is not the case. Thanks, Andre