From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stephen Caudle <stephen@doceme.com>
Date: Tue, 25 Aug 2009 08:51:56 -0400
Subject: [U-Boot] RTC value corruption on QIL-A9G20 startup
In-Reply-To: <4A93B0F8.80409@eukrea.com>
References: <c2b149fd0908241901u50208fahb987b2c8349d182d@mail.gmail.com>
	<20090825083729.GA10327@pc-ras4041.res.insa>
	<4A93B0F8.80409@eukrea.com>
Message-ID: <c2b149fd0908250551t1cead6c7sb95a6d1ff2e2656b@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Eric,

On Tue, Aug 25, 2009 at 5:38 AM, Eric B?nard<eric@eukrea.com> wrote:
> isn't the RTC connected to the SPI chip select that the internal firmware
> toggle on boot to probe for a SPI Flash ?

That is certainly possible.  This problem went away for me when I upgraded to
the "next" branch.  Could the SPI dataflash code have been removed between
v2009.06 and "next"?  I'll look into this some more.  Thanks for the hint!

Regards,
Stephen