* [U-Boot-Users] Programming 28F640J3 flash on ARM Integrator CP gets timeout
@ 2004-10-06 0:41 Shawn
0 siblings, 0 replies; only message in thread
From: Shawn @ 2004-10-06 0:41 UTC (permalink / raw)
To: u-boot
Hi,
I use the ported ARM Integrator CP board and modified the flash part
to support the new flash chip Intel StrataFlash 28F640J3. When
programming the Flash with a big chunk of data (hundreds of KB or MB),
it very often gets timeout. I changed the timeout value to a big numer
(10 times of the original value), but it didn't help. I don't see the
issue is related to the software. What else will cause this problem?
I printed the status when programming or erasing gets timeout.
Sometimes it shows low programming voltage detected (SR.3 == 1).
Any hints are appreciated.
-Shawn.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-10-06 0:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-06 0:41 [U-Boot-Users] Programming 28F640J3 flash on ARM Integrator CP gets timeout Shawn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox