[U-Boot-Users] ARM Integrator CP/AP support?

Shawn
2004-10-25T22:20:12Z

Hi,

Different core modules can be plugged into Integrator CP or AP board.
Now I have some patches to support different core modules on top of
Integrator CP/AP but has some little problem need help.

My proposal is as follows.

xtract_integrator = $(subst _946es,,$(subst _config,,$1))
xtract_integrator_cm = $(subst integratorap,,$(subst
integratorcp,,$(subst _config,,$1)))

integratorap_config \
integratorap_946es_config \
integratorcp_config \
integratorcp_946es_config : unconfig
@cm=$(call xtract_integrator_cm,$@); \
case $$cm in \
_946es) cm=arm946es;; \
*) cm=arm926ejs;; \
esac; \
echo "cm=$$cm"; \
if [ "$$cm" == "arm946es" ]; then \
echo "#define CONFIG_ARM946ES 1 /* This is an arm946es
CPU core */" >> ./include/con
fig.h ; \
echo "... configured for ARM946ES"; \
else \
echo "#define CONFIG_ARM926EJS 1 /* This is an
arm926ejs CPU core */" >> ./include/c
onfig.h ; \
echo "... configured for ARM926EJS"; \
fi; \
./mkconfig -a $(call xtract_integrator,$@) arm $$cm $(call
xtract_integrator,$@)

But one more thing I need to change is the u-boot.lds file in
board/integratorcp and board/integratorap.

.text :
{
cpu/arm926ejs/start.o (.text)
*(.text)
}

I need to change the directory cpu/arm926ejs/start.o to some value of
cpu/$$cm/start.o. A simple SED or AWK command may be able to fulfill
this but I'm not familiar either of them. Can someone help?

Thanks,
-Shawn.