Hi Tom,

On 06/07/2023 01:05 PM, Tom Rini wrote:
> On Tue, Jun 06, 2023 at 01:19:47PM -0700, William Zhang wrote:
>> Hi Jagan,
>>
>> On 06/02/2023 11:56 AM, William Zhang wrote:
>>> Hi Jagan,
>>>
>>> On 06/01/2023 11:01 PM, Jagan Teki wrote:
>>>> On Wed, May 3, 2023 at 12:29 AM William Zhang
>>>> <william.zhang@broadcom.com> wrote:
>>>>>
>>>>> This patch series is the u-boot port from the recently accepted kernel
>>>>> Broadcom HSSPI driver patch series here [1]. It includes the
>>>>> accumulative updates and fixes for the driver from Broadcom. It also
>>>>> added a new driver for the updated SPI controller found in the new
>>>>> BCMBCA SoC. The device tree document is converted to yaml format and
>>>>> updated accordingly.
>>>>>
>>>>> [1]: https://lore.kernel.org/all/20230207065826.285013-1-william.zhang@broadcom.com/
>>>>>
>>>>>
>>>>> Changes in v2:
>>>>> - Add Álvaro Fernández Rojas as another maintainer
>>>>>
>>>>> William Zhang (9):
>>>>>     dt-bindings: spi: Add bcm63xx-hsspi controller support
>>>>>     ARM: dts: broadcom: bcmbca: Add spi controller node
>>>>>     arm64: dts: broadcom: bcmbca: Add spi controller node
>>>>>     spi: bcm63xx-hsspi: Enable SPI drivers by default
>>>>>     spi: bcm63xx-hsspi: Add new compatible string support
>>>>>     spi: bcm63xx-hsspi: Fix multi-bit mode setting
>>>>
>>>> This will fix for the upcoming release.
>>>>
>>>>>     spi: bcm63xx-hsspi: Add prepend mode support
>>>>>     spi: bcmbca-hsspi: Add driver for newer HSSPI controller
>>>>>     MAINTAINERS: Add Broadcom Broadband SoC HS SPI drivers
>>>>
>>>> Patches send the patches related to SPI as separate series.
>>>>
>>>> Also please note that for arch patches, I have moved to tom since I'm
>>>> unable to find the proper delate for bcmbca.
>>>>
>>> Thanks Jagan for the reviews. I will send out two patches series with
>>> updates based on the reviews: one for SPI driver changes and another for
>>> arch/dts/doc changes
>>>
>> There is one issue in separating the patches to SPI only changes and
>> arch/dts changes.  The new BCMBCA HSSPI driver depends on a new config
>> HAVE_SPI_CS_CTRL that is added to arch/arm/mach-bcmbca/Kconfig
>> in the arch change patch series.  So you will get build error on generating
>> the .config and have to pick that change to avoid that issue. Will that be
>> okay?
> 
> Frankly I'd rather the whole series just come in via Jagan's tree, or if
> he's uncomfortable with that, I'll take the whole series if he's fine
> with the SPI side.  We don't need to worry about which sub-tree is used
> so long as maintainers are happy with the contents, in U-Boot, imho.
> 
Sounds good and thanks Tom! Let me send out the v3 of the whole series 
some time late today.