From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dalon L Westergreen Date: Wed, 20 Mar 2019 12:05:04 -0700 Subject: [U-Boot] [PATCH] ARM: socfpga: Build sfp image only for Gen5 and Arria10 devices In-Reply-To: <13089c2b-2b6f-c832-aac7-99de36426949@denx.de> References: <20190320154011.10682-1-dwesterg@gmail.com> <13089c2b-2b6f-c832-aac7-99de36426949@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, 2019-03-20 at 18:09 +0100, Marek Vasut wrote: > On 3/20/19 4:40 PM, Dalon Westergreen wrote: > > From: Dalon Westergreen > > > > The sfp file is only valid for Gen5 (Cyclone5 & Arria5) and Arria10 > > devices. The file should only be built for these devices. > > > > Signed-off-by: Dalon Westergreen > > --- > > Kconfig | 3 ++- > > scripts/Makefile.spl | 6 +++++- > > 2 files changed, 7 insertions(+), 2 deletions(-) > > > > diff --git a/Kconfig b/Kconfig > > index 512c7beb89..305b265ed7 100644 > > --- a/Kconfig > > +++ b/Kconfig > > @@ -226,7 +226,8 @@ config BUILD_ROM > > > > config BUILD_TARGET > > string "Build target special images" > > - default "u-boot-with-spl.sfp" if ARCH_SOCFPGA > > + default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10 > > + default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5 > > default "u-boot-spl.kwb" if ARCH_MVEBU && SPL > > default "u-boot-elf.srec" if RCAR_GEN3 > > default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI > > diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl > > index 9d5921606e..592c5dfe57 100644 > > --- a/scripts/Makefile.spl > > +++ b/scripts/Makefile.spl > > @@ -212,7 +212,11 @@ ifdef CONFIG_SAMSUNG > > ALL-y += $(obj)/$(BOARD)-spl.bin > > endif > > > > -ifdef CONFIG_ARCH_SOCFPGA > > +ifdef CONFIG_TARGET_SOCFPGA_ARRIA10 > > ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),) > ALL-y ... > endif > > Then you don't need to duplicate the entry. sure thing. > > > +ALL-y += $(obj)/$(SPL_BIN).sfp > > +endif > > + > > +ifdef CONFIG_TARGET_SOCFPGA_GEN5 > > ALL-y += $(obj)/$(SPL_BIN).sfp > > endif > > > > > >