From: Peter Tyser <ptyser@xes-inc.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/3]Support for XPedite5370 and misc GPIO
Date: Mon, 1 Dec 2008 13:45:30 -0600 [thread overview]
Message-ID: <cover.1228160312.git.ptyser@xes-inc.com> (raw)
Hello,
This patch series adds support for the XPedite5370 SBC.
Its an MPC8572-based VPX card with a PMC/XMC site. The
XPedite5370 includes a significant number of I2C GPIO devices (5)
which are used for board configuration. I added support for
2 new I2C gpio devices in a new drivers/gpio directory. I'm
not sure if this is the preferred location/method, so let me know
if others have have different preferences. It'd be nice to have a
more generic GPIO framework (like Linux's) at some point, but
figured this was a step in the right direction by providing a
place for generic GPIO devices in drivers/gpio.
Thanks,
Peter
Changes since v1:
- Rebased to u-boot-mpc85xx tree
- Updated NOR flash remapping method
- Added CONFIG_SYS_I2C2_OFFSET define to XPEDITE5370.h
- Removed CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE from XPEDITE5370.h
Changes since v2:
pca953x.c:
- Use cmd_tbl_t for subcommand parsing
- Made 'info' command dependent on CONFIG_CMD_PCA953X_INFO
- Removed chip command parameters, added 'device' subcommand
ds4510.c:
- Use cmd_tbl_t for subcommand parsing
- Made 'info' command dependent on CONFIG_CMD_DS4510_INFO
- Made memory commands dependent on CONFIG_CMD_DS4510_MEM
- Made 'rst' command dependent on CONFIG_CMD_DS4510_RST
- Removed chip command parameters, added 'device' subcommand
- Fixed multiline comment style
- moved to drivers/misc
xpedite5370:
- Changed alignment by spaces to alignment by tabs
- Fixed gur->devdisr typo for PCIe2
- Fixed some lines over 80 chars
- Fixed multiline comment style
- Cleaned up environment defines
Changes since v3:
- Removed CONFIG_L1_INIT_RAM reference
Peter Tyser (3):
Add support for PCA953x I2C gpio devices
Add support for Maxim's DS4510 I2C device
XPedite5370 board support
MAINTAINERS | 3 +
MAKEALL | 1 +
Makefile | 5 +
README | 13 +
board/xes/common/Makefile | 56 ++++
board/xes/common/fsl_8572_clk.c | 51 +++
board/xes/common/fsl_85xx_ddr.c | 93 ++++++
board/xes/common/fsl_85xx_pci.c | 265 ++++++++++++++++
board/xes/xpedite5370/Makefile | 45 +++
board/xes/xpedite5370/config.mk | 35 ++
board/xes/xpedite5370/ddr.c | 270 ++++++++++++++++
board/xes/xpedite5370/law.c | 54 ++++
board/xes/xpedite5370/tlb.c | 94 ++++++
board/xes/xpedite5370/u-boot.lds | 145 +++++++++
board/xes/xpedite5370/xpedite5370.c | 128 ++++++++
drivers/gpio/Makefile | 47 +++
drivers/gpio/pca953x.c | 218 +++++++++++++
drivers/misc/Makefile | 1 +
drivers/misc/ds4510.c | 400 ++++++++++++++++++++++++
include/configs/XPEDITE5370.h | 589 +++++++++++++++++++++++++++++++++++
include/gpio/ds4510.h | 75 +++++
include/gpio/pca953x.h | 39 +++
22 files changed, 2627 insertions(+), 0 deletions(-)
create mode 100644 board/xes/common/Makefile
create mode 100644 board/xes/common/fsl_8572_clk.c
create mode 100644 board/xes/common/fsl_85xx_ddr.c
create mode 100644 board/xes/common/fsl_85xx_pci.c
create mode 100644 board/xes/xpedite5370/Makefile
create mode 100644 board/xes/xpedite5370/config.mk
create mode 100644 board/xes/xpedite5370/ddr.c
create mode 100644 board/xes/xpedite5370/law.c
create mode 100644 board/xes/xpedite5370/tlb.c
create mode 100644 board/xes/xpedite5370/u-boot.lds
create mode 100644 board/xes/xpedite5370/xpedite5370.c
create mode 100644 drivers/gpio/Makefile
create mode 100644 drivers/gpio/pca953x.c
create mode 100644 drivers/misc/ds4510.c
create mode 100644 include/configs/XPEDITE5370.h
create mode 100644 include/gpio/ds4510.h
create mode 100644 include/gpio/pca953x.h
next reply other threads:[~2008-12-01 19:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-01 19:45 Peter Tyser [this message]
2008-12-01 19:45 ` [U-Boot] [PATCH v4 1/3] Add support for PCA953x I2C gpio devices Peter Tyser
2008-12-01 19:45 ` [U-Boot] [PATCH v4 2/3] Add support for Maxim's DS4510 I2C device Peter Tyser
2008-12-01 19:45 ` [U-Boot] [PATCH v4 3/3] XPedite5370 board support Peter Tyser
2008-12-04 9:14 ` Andy Fleming
2008-12-04 16:43 ` Peter Tyser
2008-12-14 11:38 ` [U-Boot] [PATCH v4 2/3] Add support for Maxim's DS4510 I2C device Wolfgang Denk
2008-12-15 23:53 ` Peter Tyser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1228160312.git.ptyser@xes-inc.com \
--to=ptyser@xes-inc.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox