From: Alessandro Rubini <rubini-list@gnudd.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 0/9] display and keypad support for nhk8815
Date: Sat, 5 Dec 2009 13:39:09 +0100 [thread overview]
Message-ID: <cover.1260016056.git.rubini@unipv.it> (raw)
This patch series is very similar to V2 I sent on Nov 25th,
only 2/9 and 9/9 are different.
Changes from V2:
* the clcd driver using a C structure instead of numeric defines for
register offsets. Renamed previous clcdc_regs to clcd_config, since
regs is now the hardware-description structure.
* added "address" field to clcd_config, so clcd.c doesn't include
anithing specific to Nomadik and can be use unchanged by other
clcd-equipped SoCs.
ps: Wolfgang: while I understand patches must be posted, I offered to
avoid extra traffic if it was only a matter of removing printf. Won't
do that again, lesson learnt.
Alessandro Rubini (9):
nhk8815: change the order of initialization
video: add amba-clcd prime-cell
include/nomadik.h: add physical address for cldc
drivers/misc: add stmpe2401 port extender and keypad controller
nhk8815.h: define we need stmpe
lcd: make 16bpp work
nhk8815: added keypad
nhk8815: start lower in RAM, so the 800x480 frame buffer fits
nhk8815: added lcd support
board/st/nhk8815/Makefile | 6 +-
board/st/nhk8815/config.mk | 8 +-
board/st/nhk8815/keypad.c | 99 +++++++++++++++++++
board/st/nhk8815/lcd.c | 88 +++++++++++++++++
board/st/nhk8815/nhk8815-devices.h | 8 ++
board/st/nhk8815/nhk8815.c | 38 +++++--
common/lcd.c | 27 ++++-
drivers/misc/Makefile | 1 +
drivers/misc/stmpe2401.c | 191 ++++++++++++++++++++++++++++++++++++
drivers/video/Makefile | 1 +
drivers/video/amba.c | 79 +++++++++++++++
include/amba_clcd.h | 77 +++++++++++++++
include/configs/nhk8815.h | 20 ++++-
include/nomadik.h | 1 +
include/stmpe2401.h | 66 ++++++++++++
15 files changed, 687 insertions(+), 23 deletions(-)
create mode 100644 board/st/nhk8815/keypad.c
create mode 100644 board/st/nhk8815/lcd.c
create mode 100644 board/st/nhk8815/nhk8815-devices.h
create mode 100644 drivers/misc/stmpe2401.c
create mode 100644 drivers/video/amba.c
create mode 100644 include/amba_clcd.h
create mode 100644 include/stmpe2401.h
next reply other threads:[~2009-12-05 12:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-05 12:39 Alessandro Rubini [this message]
2009-12-05 12:39 ` [U-Boot] [PATCH V3 1/9] nhk8815: change the order of initialization Alessandro Rubini
2009-12-05 12:39 ` [U-Boot] [PATCH V3 2/9] video: add amba-clcd prime-cell Alessandro Rubini
2009-12-12 20:13 ` Anatolij Gustschin
2009-12-05 12:39 ` [U-Boot] [PATCH V3 3/9] include/nomadik.h: add physical address for cldc Alessandro Rubini
2009-12-12 20:14 ` Anatolij Gustschin
2009-12-05 12:39 ` [U-Boot] [PATCH V3 4/9] drivers/misc: add stmpe2401 port extender and keypad controller Alessandro Rubini
2009-12-05 12:40 ` [U-Boot] [PATCH V3 5/9] nhk8815.h: define we need stmpe Alessandro Rubini
2009-12-05 12:40 ` [U-Boot] [PATCH V3 6/9] lcd: make 16bpp work Alessandro Rubini
2009-12-05 20:01 ` Alessandro Rubini
2009-12-12 20:52 ` [U-Boot] [PATCH] lcd: remove CONFIG_ATMEL_LCD ifdefs from lcd_setfgcolor Anatolij Gustschin
2010-01-27 20:53 ` Anatolij Gustschin
2010-01-27 21:20 ` Alessandro Rubini
2010-03-13 16:44 ` [U-Boot] [PATCH] lcd: make 16bpp work Anatolij Gustschin
2010-03-14 12:08 ` Alessandro Rubini
2010-03-24 10:33 ` Anatolij Gustschin
2009-12-05 12:40 ` [U-Boot] [PATCH V3 7/9] nhk8815: added keypad Alessandro Rubini
2009-12-05 12:40 ` [U-Boot] [PATCH V3 8/9] nhk8815: start lower in RAM, so the 800x480 frame buffer fits Alessandro Rubini
2009-12-05 12:40 ` [U-Boot] [PATCH V3 9/9] nhk8815: added lcd support Alessandro Rubini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1260016056.git.rubini@unipv.it \
--to=rubini-list@gnudd.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox