From: julian.pidancet at citrix.com <julian.pidancet@citrix.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/4] Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate
Date: Fri, 25 Mar 2011 08:48:53 +0000 [thread overview]
Message-ID: <cover.1301040318.git.julian.pidancet@citrix.com> (raw)
From: Julian Pidancet <julian.pidancet@citrix.com>
This patch modifies existing OpenRD-Base support to deal with all
the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD-Ultimate).
This is based on an original patch sent by Tanmay Upadhyay. Most of the
credits goes to him.
Previous version of this patch has been reworked to separate file renaming
from the actual addition of Client and Ultimate variants support.
A nice future improvement would be to add variant detection and configuration
at run-time as suggested on the mailing-list in a recent email. So one could
use the same binary for all board variants.
Julian Pidancet (4):
Kirkwood: Rename openrd_base board files to openrd.
Change OpenRD Base board identification string.
Add support for the Client variant of the OpenRD board.
Add support for the Ultimate variant of the OpenRD board
MAKEALL | 2 +
board/Marvell/{openrd_base => openrd}/Makefile | 2 +-
board/Marvell/{openrd_base => openrd}/kwbimage.cfg | 0
.../{openrd_base/openrd_base.c => openrd/openrd.c} | 28 ++++-
.../{openrd_base/openrd_base.h => openrd/openrd.h} | 6 +-
boards.cfg | 4 +-
include/configs/openrd.h | 107 ++++++++++++++++++++
include/configs/openrd_base.h | 85 ++--------------
include/configs/openrd_client.h | 44 ++++++++
include/configs/openrd_ultimate.h | 44 ++++++++
10 files changed, 235 insertions(+), 87 deletions(-)
rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (83%)
rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (95%)
create mode 100644 include/configs/openrd.h
create mode 100644 include/configs/openrd_client.h
create mode 100644 include/configs/openrd_ultimate.h
--
Julian Pidancet
next reply other threads:[~2011-03-25 8:48 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-25 8:48 julian.pidancet at citrix.com [this message]
2011-03-25 8:48 ` [U-Boot] [PATCH v2 1/4] Kirkwood: Rename openrd_base board files to openrd julian.pidancet at citrix.com
2011-03-29 12:53 ` Prafulla Wadaskar
2011-04-06 18:55 ` [U-Boot] [PATCH 1/2] Add definitions for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-04-06 18:55 ` [U-Boot] [PATCH 2/2] Initialize second PHY on " Clint Adams
2011-04-07 6:17 ` Prafulla Wadaskar
2011-04-07 7:18 ` Albert ARIBAUD
2011-04-11 12:03 ` Prafulla Wadaskar
2011-04-11 12:45 ` Albert ARIBAUD
2011-04-11 17:05 ` Prafulla Wadaskar
2011-04-12 16:09 ` [U-Boot] [PATCH 1/3] Add definitions for " Clint Adams
2011-04-12 16:09 ` [U-Boot] [PATCH 2/3] Initialize second PHY on " Clint Adams
2011-04-12 18:38 ` Julian Pidancet
2011-04-12 18:44 ` [U-Boot] [PATCH 1/3] Add definitions for " Clint Adams
2011-04-12 18:44 ` [U-Boot] [PATCH 2/3] Initialize second PHY on " Clint Adams
2011-04-13 11:13 ` Detlev Zundel
2011-04-13 14:18 ` Prafulla Wadaskar
2011-04-12 18:44 ` [U-Boot] [PATCH 3/3] Rename openrd_base files to openrd Clint Adams
2011-04-13 14:22 ` Prafulla Wadaskar
2011-04-13 16:25 ` [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support Clint Adams
2011-04-13 16:25 ` [U-Boot] [V1 1/3] Rename openrd_base files to openrd Clint Adams
2011-04-13 16:25 ` [U-Boot] [V1 2/3] Add definitions for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-04-13 16:25 ` [U-Boot] [V1 3/3] Initialize second PHY on " Clint Adams
2011-04-13 19:57 ` [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support Albert ARIBAUD
2011-04-14 0:11 ` Clint Adams
2011-04-14 4:56 ` Albert ARIBAUD
2011-04-18 23:47 ` [U-Boot] [PATCH v2 0/4] support for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-04-18 23:47 ` [U-Boot] [PATCH v2 1/4] Rename openrd_base files to openrd Clint Adams
2011-04-25 22:10 ` Wolfgang Denk
2011-04-18 23:47 ` [U-Boot] [PATCH v2 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-04-25 22:11 ` Wolfgang Denk
2011-04-25 22:12 ` Wolfgang Denk
2011-04-26 1:17 ` [U-Boot] [PATCH v4 0/4] OpenRD-Client and OpenRD-Ultimate support Clint Adams
2011-04-26 1:17 ` [U-Boot] [PATCH v4 1/4] Rename openrd_base files to openrd Clint Adams
2011-04-26 1:17 ` [U-Boot] [PATCH v4 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-04-26 1:17 ` [U-Boot] [PATCH v4 3/4] Initialize second PHY on " Clint Adams
2011-04-26 1:17 ` [U-Boot] [PATCH v4 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards Clint Adams
2011-05-03 12:01 ` [U-Boot] [PATCH v4 0/4] OpenRD-Client and OpenRD-Ultimate support Prafulla Wadaskar
2011-05-03 15:00 ` [U-Boot] [PATCH v5 " Clint Adams
2011-05-03 15:00 ` [U-Boot] [PATCH v5 1/4] Rename openrd_base files to openrd Clint Adams
2011-05-03 15:00 ` [U-Boot] [PATCH v5 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-05-03 15:00 ` [U-Boot] [PATCH v5 3/4] Initialize second PHY on " Clint Adams
2011-05-03 15:00 ` [U-Boot] [PATCH v5 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards Clint Adams
2011-05-06 13:20 ` [U-Boot] [PATCH v5 0/4] OpenRD-Client and OpenRD-Ultimate support Prafulla Wadaskar
2011-04-26 1:20 ` [U-Boot] [PATCH v2 2/4] Add definitions for OpenRD-Client and OpenRD-Ultimate Clint Adams
2011-04-18 23:47 ` [U-Boot] [PATCH v2 3/4] Initialize second PHY on " Clint Adams
2011-04-19 4:24 ` Prafulla Wadaskar
2011-04-25 22:14 ` Wolfgang Denk
2011-04-18 23:47 ` [U-Boot] [PATCH v2 4/4] Enable multiple fs options for Marvell SoC family on OpenRD boards Clint Adams
2011-04-25 22:14 ` Wolfgang Denk
2011-04-18 23:52 ` [U-Boot] [V1 0/3] OpenRD-Client and OpenRD-Ultimate support Clint Adams
2011-04-12 19:57 ` [U-Boot] [PATCH 1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate Albert ARIBAUD
2011-04-12 18:48 ` [U-Boot] [PATCH 2/3] Initialize second PHY on " Clint Adams
2011-04-12 16:09 ` [U-Boot] [PATCH 3/3] Rename openrd_base files to openrd Clint Adams
2011-04-12 16:41 ` Albert ARIBAUD
2011-04-12 16:44 ` [U-Boot] [PATCH 1/3] Add definitions for OpenRD-Client and OpenRD-Ultimate Albert ARIBAUD
2011-04-12 16:14 ` [U-Boot] [PATCH 2/2] Initialize second PHY on " Clint Adams
2011-04-06 18:59 ` [U-Boot] [PATCH v2 1/4] Kirkwood: Rename openrd_base board files to openrd Clint Adams
2011-03-25 8:48 ` [U-Boot] [PATCH v2 2/4] Change OpenRD Base board identification string julian.pidancet at citrix.com
2011-03-29 12:58 ` Prafulla Wadaskar
2011-03-25 8:48 ` [U-Boot] [PATCH v2 3/4] Add support for the Client variant of the OpenRD board julian.pidancet at citrix.com
2011-03-29 13:01 ` Prafulla Wadaskar
2011-03-25 8:48 ` [U-Boot] [PATCH v2 4/4] Add support for the Ultimate " julian.pidancet at citrix.com
2011-03-25 22:02 ` [U-Boot] [PATCH v2 0/4] Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate Clint Adams
2011-03-27 5:18 ` Prafulla Wadaskar
2011-03-28 12:14 ` Harro Haan
2011-04-02 21:11 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1301040318.git.julian.pidancet@citrix.com \
--to=julian.pidancet@citrix.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox