From: Valentin Longchamp <valentin.longchamp@keymile.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/30] Keymile boards mainlining, part 2 (resend)
Date: Fri, 8 Apr 2011 16:23:50 +0200 [thread overview]
Message-ID: <cover.1302272395.git.valentin.longchamp@keymile.com> (raw)
This series is the second effort of merging the Keymile boards support
back into mainline.
Most of the patches are only keymile relevant and should only affect our
boards.
There are also patches for the i2c deblocking support and cramfs for ARM.
The whole series is based on current denx-master with the our first patch
series posted by Heiko that was reviewed previous weeks and should still
be merged during the current merge window:
http://lists.denx.de/pipermail/u-boot/2011-April/089530.html
Heiko Schocher (5):
lib, vsprintf: introduce strict_strtoul
arm/km: add CRAMFS support for keymile boards
cramfs: make cramfs usable without a NOR flash
i2c, soft_i2c: deblock bus if switching to another i2c bus
arm, powerpc, keymile boards: move keymile specific header in subdir
Holger Brunck (18):
km/common: remove hdlc_enet implementation
powerpc/km82xx: cleanup coding style for mgcoge.c
powerpc/km82xx: rename mgcoge files to km82xx
powerpc/km82xx: move SDRAM config to board config
powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual
powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support
poweprc/km82xx: add board specific environment variable
arm/km: add addbootcount environment variable
arm/km: remove last_stage_init and unneeded printouts
arm/km: add second serial interface for kirkwood
common/hush: make get_local_var visible for other users
km/common: implement setboardid as a command
km/common: add pnvramsize to default environment
km/common: fix coding style issues in generic header
km/common: simplify default environment
arm/km: rename mgcoge2un to mgcoge3un
arm/km: change default settings for egiga on mgcoge3un
arm/km: update mgcoge3un board support
Huber, Andreas (1):
powerpc/km82xx: add DIP switch detection
Stefan Bigler (1):
i2c: add i2c deblock sequence before and after every mux config
Thomas Herzmann (2):
km/common: fix initial_boot_bank for bootpackages
km/common: replace env var checkboardidlist by function
Valentin Longchamp (3):
arm/km: add mkimage config file for uart download
arm/km: add BootROM config files for memphis SDRAM
arm/km: disable ls (through jffs2 support)
MAINTAINERS | 4 +-
board/keymile/common/common.c | 156 ++++++-
board/keymile/common/common.h | 84 +++-
board/keymile/common/keymile_hdlc_enet.c | 620 ------------------------
board/keymile/{mgcoge => km82xx}/Makefile | 3 +-
board/keymile/km82xx/km82xx.c | 373 ++++++++++++++
board/keymile/km_arm/km_arm.c | 93 +++-
board/keymile/km_arm/kwbimage-memphis-uart.cfg | 197 ++++++++
board/keymile/km_arm/kwbimage-memphis.cfg | 197 ++++++++
board/keymile/km_arm/kwbimage-uart.cfg | 179 +++++++
board/keymile/mgcoge/mgcoge.c | 333 -------------
board/keymile/mgcoge/mgcoge_hdlc_enet.c | 276 -----------
board/keymile/scripts/README | 25 +
board/keymile/scripts/debug-arm-env.txt | 2 +
board/keymile/scripts/debug-common-env.txt | 9 +
board/keymile/scripts/debug-ppc-env.txt | 2 +
boards.cfg | 6 +-
common/cmd_cramfs.c | 12 +-
common/cmd_i2c.c | 12 +
common/hush.c | 3 +-
drivers/i2c/soft_i2c.c | 1 +
drivers/net/mvgbe.h | 2 +
fs/cramfs/cramfs.c | 4 +
include/_exports.h | 1 +
include/common.h | 1 +
include/configs/{ => km}/keymile-common.h | 175 +------
include/configs/{ => km}/km-powerpc.h | 12 +-
include/configs/{ => km}/km82xx-common.h | 29 +-
include/configs/{ => km}/km8321-common.h | 0
include/configs/{ => km}/km83xx-common.h | 0
include/configs/{ => km}/km_arm.h | 25 +-
include/configs/kmeter1.h | 2 +-
include/configs/kmsupx5.h | 2 +-
include/configs/mgcoge.h | 35 ++-
include/configs/{mgcoge2ne.h => mgcoge3ne.h} | 57 ++-
include/configs/{mgcoge2un.h => mgcoge3un.h} | 37 ++-
include/configs/suen3.h | 2 +-
include/configs/suen8.h | 2 +-
include/configs/suvd3.h | 2 +-
include/configs/tuda1.h | 2 +-
include/configs/tuxa1.h | 2 +-
include/exports.h | 1 +
include/hush.h | 1 +
include/i2c.h | 2 -
lib/vsprintf.c | 47 ++
45 files changed, 1531 insertions(+), 1499 deletions(-)
delete mode 100644 board/keymile/common/keymile_hdlc_enet.c
rename board/keymile/{mgcoge => km82xx}/Makefile (94%)
create mode 100644 board/keymile/km82xx/km82xx.c
create mode 100644 board/keymile/km_arm/kwbimage-memphis-uart.cfg
create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg
create mode 100644 board/keymile/km_arm/kwbimage-uart.cfg
delete mode 100644 board/keymile/mgcoge/mgcoge.c
delete mode 100644 board/keymile/mgcoge/mgcoge_hdlc_enet.c
create mode 100644 board/keymile/scripts/README
create mode 100644 board/keymile/scripts/debug-arm-env.txt
create mode 100644 board/keymile/scripts/debug-common-env.txt
create mode 100644 board/keymile/scripts/debug-ppc-env.txt
rename include/configs/{ => km}/keymile-common.h (63%)
rename include/configs/{ => km}/km-powerpc.h (91%)
rename include/configs/{ => km}/km82xx-common.h (93%)
rename include/configs/{ => km}/km8321-common.h (100%)
rename include/configs/{ => km}/km83xx-common.h (100%)
rename include/configs/{ => km}/km_arm.h (93%)
rename include/configs/{mgcoge2ne.h => mgcoge3ne.h} (57%)
rename include/configs/{mgcoge2un.h => mgcoge3un.h} (65%)
next reply other threads:[~2011-04-08 14:23 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-08 14:23 Valentin Longchamp [this message]
2011-04-08 14:23 ` [U-Boot] [PATCH 01/30] lib, vsprintf: introduce strict_strtoul Valentin Longchamp
2011-04-29 23:15 ` Wolfgang Denk
2011-05-03 7:33 ` [U-Boot] [PATCH v2] " Heiko Schocher
2011-05-12 19:07 ` Wolfgang Denk
2011-04-08 14:23 ` [U-Boot] [PATCH 02/30] powerpc/km82xx: add DIP switch detection Valentin Longchamp
2011-04-08 14:23 ` [U-Boot] [PATCH 03/30] km/common: remove hdlc_enet implementation Valentin Longchamp
2011-04-08 14:23 ` [U-Boot] [PATCH 04/30] powerpc/km82xx: cleanup coding style for mgcoge.c Valentin Longchamp
2011-04-08 14:23 ` [U-Boot] [PATCH 05/30] powerpc/km82xx: rename mgcoge files to km82xx Valentin Longchamp
2011-04-08 14:23 ` [U-Boot] [PATCH 06/30] powerpc/km82xx: move SDRAM config to board config Valentin Longchamp
2011-04-30 7:56 ` Wolfgang Denk
2011-05-02 8:04 ` Holger Brunck
2011-05-02 8:39 ` Wolfgang Denk
2011-04-08 14:23 ` [U-Boot] [PATCH 07/30] powerpc/km82xx: adapt CONFIG_SYSSYPCR to manual Valentin Longchamp
2011-04-08 14:23 ` [U-Boot] [PATCH 08/30] powerpc/km82xx: rename mgcoge2ne to mgcoge3ne board support Valentin Longchamp
2011-04-30 8:05 ` Wolfgang Denk
2011-05-02 8:20 ` Holger Brunck
2011-05-02 8:42 ` Wolfgang Denk
2011-05-02 9:22 ` Holger Brunck
2011-05-10 20:45 ` Wolfgang Denk
2011-04-08 14:23 ` [U-Boot] [PATCH 09/30] poweprc/km82xx: add board specific environment variable Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 10/30] arm/km: add addbootcount " Valentin Longchamp
2011-04-30 8:09 ` Wolfgang Denk
2011-05-02 8:22 ` Holger Brunck
2011-04-08 14:24 ` [U-Boot] [PATCH 11/30] arm/km: remove last_stage_init and unneeded printouts Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 12/30] arm/km: add CRAMFS support for keymile boards Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 13/30] arm/km: add mkimage config file for uart download Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 14/30] arm/km: add BootROM config files for memphis SDRAM Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 15/30] arm/km: disable ls (through jffs2 support) Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 16/30] arm/km: add second serial interface for kirkwood Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 17/30] cramfs: make cramfs usable without a NOR flash Valentin Longchamp
2011-04-30 8:20 ` Wolfgang Denk
2011-05-03 5:49 ` Heiko Schocher
2011-05-03 11:48 ` Wolfgang Denk
2011-05-03 12:15 ` [U-Boot] [PATCH v2 1/2] cramfs: fix bug in using CONFIG_CRAMFS_CMDLINE Heiko Schocher
2011-05-10 20:47 ` Wolfgang Denk
2011-05-03 12:15 ` [U-Boot] [PATCH v2 2/2] cramfs: make cramfs usable without a NOR flash Heiko Schocher
2011-05-10 20:47 ` Wolfgang Denk
2011-04-08 14:24 ` [U-Boot] [PATCH 18/30] i2c: add i2c deblock sequence before and after every mux config Valentin Longchamp
2011-04-28 17:26 ` Heiko Schocher
2011-04-08 14:24 ` [U-Boot] [PATCH 19/30] i2c, soft_i2c: deblock bus if switching to another i2c bus Valentin Longchamp
2011-04-28 17:26 ` Heiko Schocher
2011-04-08 14:24 ` [U-Boot] [PATCH 20/30] km/common: fix initial_boot_bank for bootpackages Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 21/30] common/hush: make get_local_var visible for other users Valentin Longchamp
2011-04-30 8:22 ` Wolfgang Denk
2011-05-02 5:23 ` Heiko Schocher
2011-05-02 5:40 ` Wolfgang Denk
2011-04-08 14:24 ` [U-Boot] [PATCH 22/30] km/common: implement setboardid as a command Valentin Longchamp
2011-04-30 8:25 ` Wolfgang Denk
2011-05-02 7:32 ` Holger Brunck
2011-04-08 14:24 ` [U-Boot] [PATCH 23/30] km/common: replace env var checkboardidlist by function Valentin Longchamp
2011-04-30 8:29 ` Wolfgang Denk
2011-05-02 8:30 ` Holger Brunck
2011-05-02 8:43 ` Wolfgang Denk
2011-04-08 14:24 ` [U-Boot] [PATCH 24/30] km/common: add pnvramsize to default environment Valentin Longchamp
2011-04-30 8:32 ` Wolfgang Denk
2011-05-02 7:41 ` Holger Brunck
2011-04-08 14:24 ` [U-Boot] [PATCH 25/30] km/common: fix coding style issues in generic header Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 26/30] arm, powerpc, keymile boards: move keymile specific header in subdir Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 27/30] km/common: simplify default environment Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 28/30] arm/km: rename mgcoge2un to mgcoge3un Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 29/30] arm/km: change default settings for egiga on mgcoge3un Valentin Longchamp
2011-04-08 14:24 ` [U-Boot] [PATCH 30/30] arm/km: update mgcoge3un board support Valentin Longchamp
2011-05-03 8:17 ` [U-Boot] [PATCH 00/30] Keymile boards mainlining, part 2 (resend) Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1302272395.git.valentin.longchamp@keymile.com \
--to=valentin.longchamp@keymile.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox