From mboxrd@z Thu Jan 1 00:00:00 1970 From: u-boot at lakedaemon.net Date: Tue, 7 Jun 2011 17:36:53 +0000 Subject: [U-Boot] [PATCH 0/1 v3] Dreamplug support Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Jason Cooper It compiles clean, and I've loaded it via JTAG and used it to dump the existing bootloader out of the SPI flash. I have _not_ used it to burn itself to the flash yet. I'm looking for comments before I try that. ;-) Some concerns: - The SPI flash chip is a Macronix MX25L1606, however it has the identical chip idcode to the MX25L1605. How is that properly handled? The 06 does have some new features [1]. [1] http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/5F41CDDCB837422C48257639003E5EC3/$File/AN055-Migrate_to_MX25L1606E_and_MX25L8006E-1.2.pdf Changes from v1 to v2: - resorted series to move 'make all' support last. Changes from v2 to v3: - Use MACH_TYPE_GURUPLUG for now until dreamplug support is in Linux. - Update MAINTAINERS. - Collapse into one patch Jason Cooper (1): dreamplug: Initial support. MAINTAINERS | 1 + MAKEALL | 1 + board/Marvell/dreamplug/Makefile | 51 +++++++++++ board/Marvell/dreamplug/dreamplug.c | 154 ++++++++++++++++++++++++++++++++ board/Marvell/dreamplug/dreamplug.h | 39 ++++++++ board/Marvell/dreamplug/kwbimage.cfg | 160 ++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/dreamplug.h | 111 +++++++++++++++++++++++ 8 files changed, 518 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/dreamplug/Makefile create mode 100644 board/Marvell/dreamplug/dreamplug.c create mode 100644 board/Marvell/dreamplug/dreamplug.h create mode 100644 board/Marvell/dreamplug/kwbimage.cfg create mode 100644 include/configs/dreamplug.h