From: u-boot at lakedaemon.net <u-boot@lakedaemon.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/1 v4] RFC: Dreamplug support
Date: Mon, 13 Jun 2011 15:54:11 +0000 [thread overview]
Message-ID: <cover.1307979826.git.u-boot@lakedaemon.net> (raw)
From: Jason Cooper <u-boot@lakedaemon.net>
It compiles clean, and I've loaded it via JTAG and used it to dump the
existing bootloader out of the SPI flash. I have _not_ used it to burn
itself to the flash yet. I'm looking for comments before I try that. ;-)
Some concerns:
- The SPI flash chip is a Macronix MX25L1606, however it has the
identical chip idcode to the MX25L1605. How is that properly
handled? The 06 does have some new features [1].
[1] http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/5F41CDDCB837422C48257639003E5EC3/$File/AN055-Migrate_to_MX25L1606E_and_MX25L8006E-1.2.pdf
Changes from v1 to v2:
- resorted series to move 'make all' support last.
Changes from v2 to v3:
- Use MACH_TYPE_GURUPLUG for now until dreamplug support is in Linux.
- Update MAINTAINERS.
- Collapse into one patch.
Changes from v3 to v4:
- update copyright info as recommended by Prafulla Wadaskar.
- maintain proper order in boards.cfg, MAINTAINERS, etc.
- label MPP's
- change back to MACH_TYPE_DREAMPLUG. This patch is just RFC
until the Dreamplug is supported in Linux (and MACH_TYPE_ added).
Jason Cooper (1):
dreamplug: Initial support.
MAINTAINERS | 4 +
MAKEALL | 1 +
board/Marvell/dreamplug/Makefile | 54 +++++++++++
board/Marvell/dreamplug/dreamplug.c | 157 ++++++++++++++++++++++++++++++++
board/Marvell/dreamplug/dreamplug.h | 42 +++++++++
board/Marvell/dreamplug/kwbimage.cfg | 163 ++++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/dreamplug.h | 114 ++++++++++++++++++++++++
8 files changed, 536 insertions(+), 0 deletions(-)
create mode 100644 board/Marvell/dreamplug/Makefile
create mode 100644 board/Marvell/dreamplug/dreamplug.c
create mode 100644 board/Marvell/dreamplug/dreamplug.h
create mode 100644 board/Marvell/dreamplug/kwbimage.cfg
create mode 100644 include/configs/dreamplug.h
next reply other threads:[~2011-06-13 15:54 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-13 15:54 u-boot at lakedaemon.net [this message]
2011-06-13 15:54 ` [U-Boot] [PATCH 1/1 v4] RFC: dreamplug: Initial support u-boot at lakedaemon.net
2011-06-13 15:59 ` Prafulla Wadaskar
2011-06-13 16:07 ` Jason
2011-06-13 16:46 ` Wolfgang Denk
2011-06-13 16:51 ` Jason
2011-07-21 19:36 ` Clint Adams
2011-07-21 20:26 ` Jason
2011-07-21 20:56 ` Clint Adams
2011-07-21 21:17 ` Jason
2011-07-26 21:19 ` [U-Boot] RFC [PATCH 0/5 v5] add dreamplug support Jason Cooper
2011-09-11 22:10 ` [U-Boot] [PATCH v6] dreamplug: initial board support u-boot at lakedaemon.net
2011-09-12 7:37 ` Igor Grinberg
2011-09-12 11:36 ` Jason
2011-09-12 11:45 ` [U-Boot] [PATCH v7] " Jason Cooper
2011-09-13 7:32 ` Igor Grinberg
2011-09-13 13:53 ` Jason
2011-09-13 11:56 ` Prafulla Wadaskar
2011-09-13 13:00 ` Wolfgang Denk
2011-09-13 14:17 ` Jason
2011-09-14 6:39 ` Prafulla Wadaskar
2011-09-18 17:58 ` Albert ARIBAUD
2011-09-18 18:27 ` Albert ARIBAUD
2011-09-18 18:39 ` Jason
2011-09-18 20:28 ` Wolfgang Denk
2011-09-18 20:58 ` Jason
2011-09-18 19:06 ` [U-Boot] [PATCH v8] " Jason Cooper
2011-10-03 4:37 ` Prafulla Wadaskar
2011-07-26 21:19 ` [U-Boot] RFC [PATCH 1/5] drivers/rtc: add Marvell Integrated RTC Jason Cooper
2011-07-27 18:12 ` Prafulla Wadaskar
2011-07-28 1:22 ` Jason
2011-07-28 19:09 ` Prafulla Wadaskar
2011-07-26 21:19 ` [U-Boot] RFC [PATCH 2/5] arm/kirkwood: print speeds with cpu info Jason Cooper
2011-07-27 18:21 ` Prafulla Wadaskar
2011-07-28 1:31 ` Jason
2011-07-28 19:14 ` Prafulla Wadaskar
2011-10-06 18:13 ` Wolfgang Denk
2011-10-07 12:37 ` Jason
2011-07-26 21:19 ` [U-Boot] RFC [PATCH 3/5] usb: Some EHCI chipsets are slow to respond Jason Cooper
2011-07-27 18:23 ` Prafulla Wadaskar
2011-07-28 1:37 ` Jason
2011-07-28 19:16 ` Prafulla Wadaskar
2011-07-29 14:31 ` Jason
2011-07-26 21:19 ` [U-Boot] RFC [PATCH 4/5 v5] dreamplug: initial board support Jason Cooper
2011-07-27 18:38 ` Prafulla Wadaskar
2011-07-28 2:02 ` Jason
2011-07-28 19:37 ` Prafulla Wadaskar
2011-07-29 15:18 ` Jason
2011-07-29 18:57 ` Prafulla Wadaskar
2011-07-29 19:43 ` Jason
2011-10-06 18:15 ` Wolfgang Denk
2011-10-07 12:40 ` Jason
2011-07-26 21:19 ` [U-Boot] RFC [PATCH 5/5 v5] dreamplug: use MACH_TYPE_DREAMPLUG Jason Cooper
2011-07-27 18:40 ` Prafulla Wadaskar
2011-07-28 2:08 ` Jason
2011-07-28 7:25 ` Bdale Garbee
2011-07-28 12:43 ` Jason
2011-07-28 13:44 ` Bdale Garbee
2011-07-28 19:39 ` Prafulla Wadaskar
2011-07-29 15:25 ` Jason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1307979826.git.u-boot@lakedaemon.net \
--to=u-boot@lakedaemon.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox