From: Amit Virdi <amit.virdi@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V5 0/3] mtd/NAND: Support for FSMC controller
Date: Tue, 22 May 2012 15:45:53 +0530 [thread overview]
Message-ID: <cover.1337681419.git.amit.virdi@st.com> (raw)
This patchset adds support for ST's FSMC controller. In the current u-boot, a
SPEAr specific driver exists for FSMC controller. This patchset adds a full
fledged driver that can be used across multiple platforms and removes the
obsolete SPEAr specific driver.
V4 -> V5
- Dropped the patch that defined change_bit as wrapper over __change_bit and,
instead, used __change_bit directly in the driver code
V3 -> V4
- Removed local_irq_save and local_irq_restore calls from change_bit wrapper
- Report the total bit flips, including that of ECC, to the upper layers
- Replace change_bit calls for err_idx's 0th and 1st bit with "^= 3" operation
V2 -> V3
- Implemented timeout during hardware ecc read
- Used __attribute__ ((aligned(2))) instead of using array of U16
- Removed unnecessary enum
V1 -> V2
- Defined CONFIG_SYS_NAND_SELF_INIT and did the related changes
- Modified the error index calculation process
- Modified newly erased page read algorithm
- Initialized the badblockbits index to 7
- Improved fsmc_bch8_correct_data() implementation
Vipin KUMAR (3):
mtd/NAND: Add FSMC driver support
SPEAr: Configure FSMC driver for NAND interface
mtd/NAND: Remove obsolete SPEAr specific NAND drivers
arch/arm/include/asm/arch-spear/hardware.h | 8 +-
arch/arm/include/asm/arch-spear/spr_nand.h | 57 ----
board/spear/spear300/spear300.c | 14 +-
board/spear/spear310/spear310.c | 14 +-
board/spear/spear320/spear320.c | 13 +-
board/spear/spear600/spear600.c | 14 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/fsmc_nand.c | 486 ++++++++++++++++++++++++++++
drivers/mtd/nand/spr_nand.c | 124 -------
include/configs/spear-common.h | 3 +-
include/configs/spear3xx.h | 4 +
include/configs/spear6xx.h | 3 +
include/linux/mtd/fsmc_nand.h | 101 ++++++
13 files changed, 637 insertions(+), 205 deletions(-)
delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
create mode 100644 drivers/mtd/nand/fsmc_nand.c
delete mode 100644 drivers/mtd/nand/spr_nand.c
create mode 100644 include/linux/mtd/fsmc_nand.h
--
1.7.2.2
next reply other threads:[~2012-05-22 10:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-22 10:15 Amit Virdi [this message]
2012-05-22 10:15 ` [U-Boot] [PATCH V5 1/3] mtd/NAND: Add FSMC driver support Amit Virdi
2012-05-22 10:15 ` [U-Boot] [PATCH V5 2/3] SPEAr: Configure FSMC driver for NAND interface Amit Virdi
2012-05-22 10:15 ` [U-Boot] [PATCH V5 3/3] mtd/NAND: Remove obsolete SPEAr specific NAND drivers Amit Virdi
2012-05-24 4:46 ` [U-Boot] [PATCH V5 0/3] mtd/NAND: Support for FSMC controller Amit Virdi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1337681419.git.amit.virdi@st.com \
--to=amit.virdi@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox