[U-Boot] [PATCH v2 0/15] Xilinx Zynq patches

[Michal Simek <michal.simek@xilinx.com>]

Patchset contains several patches which improve Xilinx Zynq arm port.
Patchset contain:
- core changes
- gem updates
- mmc support
- i2c support
- pl support

I am sending them in one package because driver depends
on each other in zynq shared files.

Thanks for your comments,
Michal

P.S.: The first version sent by patman that's why sorry
for any mistake.

Changes in v2:
- New patch in this series to reflect Tom's comments
- Remove XPSS_ prefix and replace it with ZYNQ
- Remove CONFIG_ prefix from non configurable macros (scutimer)
- Remove CONFIG_ prefix from non configurable macro (gem)
- Remove CONFIG_ prefix from non configurable macros (emio)
- Remove CONFIG_ prefix from non configurable macros (sdhci)
- Remove CONFIG_ prefix from non configurable macros (i2c)
- Fix checkpatch warnings (i2c)
- Fix #define<space>Macro name (i2c)
- Fix multiline comments (i2c)
- Remove trailing 1 for configurations (i2c)
- Fix bugs reported by Tom Rini
- Fix checkpatch warnings (fpga)
- Fix comments (fpga)
- Do not use CamelCase for XilinxZynq (fpga)

David Andrey (3):
  arm: zynq: U-Boot udelay < 1000 FIX
  net: gem: Pass phy address to init
  net: gem: Preserve clk on emio interface

Michal Simek (12):
  arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses
  zynq: Move scutimer baseaddr to hardware.h
  net: phy: Define Marvell 88e1518 phy
  net: gem: Remove WRAP bit from TX buffer description
  net: gem: Simplify return path in zynq_gem_recv
  net: gem: Do not initialize BDs again
  net: gem: Fix gem driver on 1Gbps LAN
  zynq: Move macros to hardware.h
  net: gem: Add support for phy autodetection
  mmc: Add support for Xilinx Zynq sdhci controller
  i2c: zynq: Add support for Xilinx Zynq
  fpga: Add support for loading bitstream for Xilinx Zynq

 arch/arm/cpu/armv7/zynq/slcr.c             |  61 ++++++
 arch/arm/cpu/armv7/zynq/timer.c            |  49 ++++-
 arch/arm/include/asm/arch-zynq/hardware.h  |  36 +++-
 arch/arm/include/asm/arch-zynq/sys_proto.h |   7 +
 board/xilinx/zynq/board.c                  |  66 ++++++-
 drivers/fpga/Makefile                      |   1 +
 drivers/fpga/xilinx.c                      |  37 ++++
 drivers/fpga/zynqpl.c                      | 231 ++++++++++++++++++++++
 drivers/i2c/Makefile                       |   1 +
 drivers/i2c/zynq_i2c.c                     | 306 +++++++++++++++++++++++++++++
 drivers/mmc/Makefile                       |   1 +
 drivers/mmc/zynq_sdhci.c                   |  40 ++++
 drivers/net/phy/marvell.c                  |  11 ++
 drivers/net/zynq_gem.c                     | 199 +++++++++++++------
 include/configs/zynq.h                     |  39 +++-
 include/netdev.h                           |   2 +-
 include/xilinx.h                           |   4 +
 include/zynqpl.h                           |  59 ++++++
 18 files changed, 1065 insertions(+), 85 deletions(-)
 create mode 100644 drivers/fpga/zynqpl.c
 create mode 100644 drivers/i2c/zynq_i2c.c
 create mode 100644 drivers/mmc/zynq_sdhci.c
 create mode 100644 include/zynqpl.h

--
1.8.2.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130423/17ce7b8a/attachment.pgp>