[U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support

[Roman Byshko <rbyshko@gmail.com>]

This patch series adds USB Host EHCI support to the sunxi SoCs. It was
tested on Cubietruck. Now you could boot from a USB stick or use a
compatible Ethernet dongle to add a second Ethernet port in U-Boot.

Best,
Roman Byshko

Changes since v2:
	- improved commit messages
	- removed BIT macro
	- added get_io_base function
	- removed unnecessary verboseness when defining sunxi_echi_hcd
	  array
	- the EHCI driver is now based on [2] and uses GPIO driver 
	- possible failure is ruled out by introducing enabled_hcd_count
Changes since v1:
	- fixed erroneous copyright author
	- used SPDX tag instead of the full license
	- used setbits_le32/clrbits_le32 instead of direct bit poking
	- usage of setbits_le32/clrbits_le32 automatically fixed bug
	  where usbc_bit was clobbered unintentionally
	- added more info about commented out gpio_direction_output, it
	  will be used once [1] is applied against upstream

[1] http://patchwork.ozlabs.org/patch/356566/
[2] http://git.denx.de/u-boot-sunxi.git/

Roman Byshko (5):
  sunxi: add defines to control USB Host clocks/resets
  sunxi: add USB EHCI driver
  sunxi: add general USB settings
  sun7i: add USB EHCI settings
  sun7i: cubietruck: enable USB EHCI

 arch/arm/include/asm/arch-sunxi/clock_sun4i.h |   4 +
 boards.cfg                                    |   2 +-
 drivers/usb/host/Makefile                     |   1 +
 drivers/usb/host/ehci-sunxi.c                 | 196 ++++++++++++++++++++++++++
 include/configs/sun7i.h                       |   8 ++
 include/configs/sunxi-common.h                |   6 +
 6 files changed, 216 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/host/ehci-sunxi.c

-- 
2.0.0