public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Sanchayan Maity <maitysanchayan@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] Add support for Colibri Vybrid Modules
Date: Wed, 25 Mar 2015 17:37:25 +0530	[thread overview]
Message-ID: <cover.1427282314.git.maitysanchayan@gmail.com> (raw)

Hello,

This patchset adds support for the Toradex Colibri Vybrid VF50 and VF61 
modules. Boot up has been tested using the serial loader over UART.

First patch in the series refactors the DDR related code for use by both 
the tower board and colibri modules. It also introduces a DDR3 based 
JEDEC timing structure.

Second third and fourth patch in this series are improvement patches 
related to RTC, SoC/CPU detection and caches.

Fifth patch introduces USB support for Vybrid modules. Much of the code 
is similar to the ehci-mx6 driver. One open question here would be is 
there a better way to take care of this similarity and perhaps share the 
code base among the two drivers? Both host and client modes are working 
and DFU has also been tested. Currently, we restrict the ports to be in 
one of host and client mode.

Sixth patch adds the actual support for the Colibri modules.

Comments and feedback are most welcome.

The patchset has been based and tested on the latest master branch as of 
this writing.

- Sanchayan.

Sanchayan Maity (4):
  ARM: vf610: Move DDR3 initialization to imx-common
  ARM: vf610: Add SoC and CPU type detection
  usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's
  ARM: vf610: Initial integration for Colibri VF50/VF61

Stefan Agner (2):
  ARM: vf610: Enable external 32KHz oscillator
  ARM: vf610: Enable caches

 arch/arm/Kconfig                              |   5 +
 arch/arm/cpu/armv7/vf610/generic.c            |  45 ++-
 arch/arm/imx-common/Makefile                  |   3 +
 arch/arm/imx-common/ddrmc-vf610.c             | 278 ++++++++++++++++++
 arch/arm/include/asm/arch-vf610/crm_regs.h    |  15 +
 arch/arm/include/asm/arch-vf610/ddrmc-vf610.h |  72 +++++
 arch/arm/include/asm/arch-vf610/imx-regs.h    |  36 ++-
 board/freescale/vf610twr/vf610twr.c           | 295 +++++--------------
 board/toradex/colibri_vf/Kconfig              |  18 ++
 board/toradex/colibri_vf/MAINTAINERS          |   6 +
 board/toradex/colibri_vf/Makefile             |   7 +
 board/toradex/colibri_vf/colibri_vf.c         | 389 ++++++++++++++++++++++++++
 board/toradex/colibri_vf/imximage.cfg         |  17 ++
 configs/colibri_vf_defconfig                  |   3 +
 drivers/usb/host/Makefile                     |   1 +
 drivers/usb/host/ehci-vf.c                    | 204 ++++++++++++++
 include/configs/colibri_vf.h                  | 266 ++++++++++++++++++
 17 files changed, 1425 insertions(+), 235 deletions(-)
 create mode 100644 arch/arm/imx-common/ddrmc-vf610.c
 create mode 100644 arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
 create mode 100644 board/toradex/colibri_vf/Kconfig
 create mode 100644 board/toradex/colibri_vf/MAINTAINERS
 create mode 100644 board/toradex/colibri_vf/Makefile
 create mode 100644 board/toradex/colibri_vf/colibri_vf.c
 create mode 100644 board/toradex/colibri_vf/imximage.cfg
 create mode 100644 configs/colibri_vf_defconfig
 create mode 100644 drivers/usb/host/ehci-vf.c
 create mode 100644 include/configs/colibri_vf.h

-- 
2.3.3

             reply	other threads:[~2015-03-25 12:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-25 12:07 Sanchayan Maity [this message]
2015-03-25 12:07 ` [U-Boot] [PATCH 1/6] ARM: vf610: Move DDR3 initialization to imx-common Sanchayan Maity
2015-03-25 12:07 ` [U-Boot] [PATCH 2/6] ARM: vf610: Enable external 32KHz oscillator Sanchayan Maity
2015-03-25 12:07 ` [U-Boot] [PATCH 3/6] ARM: vf610: Add SoC and CPU type detection Sanchayan Maity
2015-03-25 12:07 ` [U-Boot] [PATCH 4/6] ARM: vf610: Enable caches Sanchayan Maity
2015-03-25 12:07 ` [U-Boot] [PATCH 5/6] usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's Sanchayan Maity
2015-03-25 12:07 ` [U-Boot] [PATCH 6/6] ARM: vf610: Initial integration for Colibri VF50/VF61 Sanchayan Maity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1427282314.git.maitysanchayan@gmail.com \
    --to=maitysanchayan@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox