From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Thu, 16 May 2019 13:03:52 +0300 Subject: [U-Boot] [PATCH 0/9] arm: mvebu: clearfog: support boot from SATA disk Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This series enables support for boot from SATA on the SolidRun Clearfog platform. Patches 1-3 are preparations for the addition of loading U-Boot main image from raw SATA device. They make spl sata code independent of board macros and specific kconfig symbols. Patch 4 adds to SPL generic support for loading U-Boot from a raw SATA device. This code is modeled after the similar support for MMC devices. Patches 5-6 are mvebu specific. Patch 5 fixes SATA access from SPL. Patch 6 adds the SATA boot option at the SoC level. Patches 7-9 are the board specific update that enable SATA boot in Clearfog, and document the offset setting requirement. Baruch Siach (9): spl: sata: add default partition and image name spl: sata: fix build with DM_SCSI spl: sata: don't force FS_FAT support spl: sata: support U-Boot load from raw sata disk arm: mvebu: fix ahci mbus config in SPL arm: mvebu: add support for boot from SATA arm: mvebu: clearfog: enable SATA in SPL arm: mvebu: clearfog: set U-Boot offset for SATA boot arm: mvebu: clearfog: document boot from SATA arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 8 ++++ arch/arm/mach-mvebu/Kconfig | 5 ++ arch/arm/mach-mvebu/Makefile | 3 ++ arch/arm/mach-mvebu/cpu.c | 4 ++ arch/arm/mach-mvebu/include/mach/soc.h | 2 + arch/arm/mach-mvebu/spl.c | 5 ++ board/solidrun/clearfog/README | 6 +++ common/spl/Kconfig | 14 ++++++ common/spl/spl_sata.c | 49 ++++++++++++++++++-- include/configs/clearfog.h | 2 +- 10 files changed, 94 insertions(+), 4 deletions(-) -- 2.20.1